• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.230-234
• /
• 2009

It is significant technique to increase competitiveness that solar cells have a high energy conversion efficiency and cost effectiveness. When making high efficiency crystalline Si solar cells, evaporated Ti/Pd/Ag contact system is widely used in order to reduce the electrical resistance of the contact fingers. However, the evaporation process is no applicable to mass production because high vacuum is needed. Furthermore, those metals are too expensive to be applied for terrestrial applications. Ni/Cu/Ag contact system of silicon solar cells offers a relatively inexpensive method of making electrical contact. Ni silicide formation is one of the indispensable techniques for Ni/Cu/Ag contact sytem. Ni was electroless plated on the front grid pattern, After Ni electroless plating, the cells were annealed by RTP(Rapid Thermal Process). Ni silicide(NiSi) has certain advantages over Ti silicide($TiSi_2$), lower temperature anneal, one step anneal, low resistivity, low silicon consumption, low film stress, absence of reaction between the annealing ambient. Ni/Cu/Ag metallization scheme is an important process in the direction of cost reduction for solar cells of high efficiency. In this article we shall report an investigation of rapid thermal silicidation of nickel on silngle crystalline silicon wafers in the annealing range of $350-390^{\circ}C$. The samples annealed at temperatures from 350 to $390^{\circ}C$ have been analyzed by SEM(Scanning Electron Microscopy).

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.240-244
• /
• 2011

The high cost of crystalline silicon solar cells has been considered as one of the major obstacles to their terrestrial applications. Spin on doping (SOD) is presented as a useful process for the manufacturing of low cost solar cells. Phosphorus (P509) was used as an n-type emitters of solar cells. N-type emitters were formed on p-type EFG ribbon Si wafers by using a SOD at different spin speed (1,000~4,000 rpm), diffusion temperatures ($800^{\circ}C{\sim}950^{\circ}C$), and diffusion time (5~30 min) in $N_2+O_2$ atmosphere. With optimum condition, we were able to achieve cell efficiency of 14.1%.

• 전자공학회논문지
• /
• 제51권5호
• /
• pp.58-69
• /
• 2014

후쿠시마 사고와 같은 중대사고에 대비하기 위하여 극한환경 내에서도 동작하여 원자력 발전소 내부 상태에 관련된 계측신호를 취득하고, 사고복구에 필요한 밸브, 펌프 등과 같은 비상기기를 작동시킬 수 있는 극한환경용 제어기기와 발전소로부터 최소 30km 떨어진 곳에서 발전소 내부 상황을 감시하고, 제어할 수 있는 모바일 원격 제어실 등으로 구성된 비상대응시스템이 필요하다. 본 논문에서는 극한환경용 제어기기와 모바일 원격 제어실과의 연계를 위한 비상대응시스템 개념 설계 및 성능분석에 대하여 논의하였다. 비상통신시스템은 IEEE 802.11 기술표준을 이용한 지상망과 천리안 위성을 이용한 위성망의 이중화 시스템으로 구성되고, 각 시스템에 대하여 통신링크 버짓, Throughput, 지연시간을 분석하였다.

• 공업화학
• /
• 제27권3호
• /
• pp.335-341
• /
• 2016

본 연구에서는 지상 및 미소중력환경하에서 물리적 승화법 공정에서의 확산-대류유동에 미치는 불순물의 영향을 이론적으로 $Hg_2Cl_2-I_2$ 시스템에 적용하여 규명하는 것이다. 이론적 해석은 증기상에서 확산-대류 흐름, 열 및 물질전달을 속도 벡터 흐름, 유선, 온도, 농도 분포를 통하여 제시된다. 결정 영역에서의 전체 몰플럭스는 중력가속도와 성분 $I_2$, 불순물에 상당히 민감하게 반응한다. 성분 $I_2$을 증가시켰을 때, 농도 대류효과는 확산-대류 유동흐름을 안정화시키는 경향이 있다. 지상중력가속도의 0.001환경에서는 유동흐름은 1차원포물선의 흐름 구조를 나타내며, 확산지배형태를 보여주고 있다. $10^{-3}$지상중력가속도 이하에서는 대류 영향은 무시할 수 있다.

• 한국방재학회 논문집
• /
• 제8권2호
• /
• pp.59-63
• /
• 2008

지표수 흐름은 육지 물수지 계산에 중요한 요소중에 하나이다. 그러나, 기상변화의 예측과 그로 인한 방재대책수립을 위한 대규모의 기상모형과 연계되는 육지수문모형(Land Surface Model, LSM)들은 지표수 흐름을 토양수분수지로부터 간단하게 산정하고 있다. 침투계산에서 지표수 흐름깊이를 무시하는 것은 지표면 및 지표하 물흐름 모두에 계산상 오류를 초래할 수 있다. 그러므로, 육지수문모형에서 종합적인 물과 에너지 순환 예측을 하기 위해, 지표수 흐름을 위한 1차원 확산모형과 지표하 물흐름을 위한 계산망 체적평균 토양수분이송(Volume Averaged Soil-moisture Transport Model, VAST)모형을 연계하는 대규모 지표면 및 지표하 연계 물흐름 모형이 개발되었다. 이 논문에서는, 최첨단 육지수문모형중 하나인 CLM(Common Land Model)내의 지표수리수문 모의를 위한 주요부분을 비롯하여, 지형특성에 따른 지표수 흐름과 공간적 토양수분 분포의 예측개선을 위한 새로운 지표면 및 지표하 연계 물흐름 모형에 대해 기술하였다.

• 한국지형학회지
• /
• 제25권2호
• /
• pp.43-61
• /
• 2018

Heterogeneous sedimentary deposits with different soil colors and various degree of hardness are exposed in its foredune and tidal zone due to the effects of recently accelerated coastal erosion along the Ujeon Coast in Jeung-do, Shinan-gun. This study was conducted on the assumption that these sedimentary deposits were developed in different timing and environments. Thus, we can infer the geomorphic development processes of the area based on evidences like the physicochemical characteristics of each sedimentary layer. Several analysis of these sedimentary depositssuch as grain size analysis, X-ray Fluorescence Measurement (XRF), and Loss on ignition (LOI) were performed on central (Ujeon A) and southern (Ujeon B) parts of the Ujeon Coast. I found that the foredune sedimentary deposits have four stages of geomorphic development processes. In the initial stage of development, during the peak of the Last Interglacial Period (MIS 5e), basal deposits were accumulated in the low-energy environment of subtidal zones. In the second stage, during the Last Glacial Period (MIS 4~MIS 2), eolian sedimentary layers were developed by terrestrial aeolian processes by which fine materials were transported from the Yellow Sea which became a dry land exposed by lowered sea level. In the third stage, various mechanism existed for the formation of each sedimentary layer. In the region of Ujeon A, sedimentary layers were developed in the littoral zone environment dominated by marine processes during the maximum phase of transgression in the Holocene. Meanwhile, the region of Ujeon B began to form eolian sedimentary layers during MIS 2. In the last stage, thick coastal dune deposits, covered all over the Ujeon Coast. During the late Holocene (0.7~0.6 ka), terrestrial processes kept dominating the region, developing typical eolian sedimentary layers.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권4호
• /
• pp.13-23
• /
• 2003

Organic carbon and nitrogen contents in suspended particulate matter (SPM) and surface sediments in seawater were measured in the Northern East China Sea in summer. The distribution of particulate organic carbon(POC) and particulate organic nitrogen(PON) were in the ranges of 54~481㎍/ℓ and 6~85㎍/ℓ, respectively, with relatively high level of concentrations in the western and southern sides of the study area. Also, there has been a significantly positive correlation between POC and PON, gradually increasing toward the deeper range of depth. Average C:N ratios of POC and PON of SPM were 6 in study area. The ratios of POC to PON of SPM increased as the range of depth increased, indicating nitrogen decomposes more rapidly than carbon and is considered to be influenced by the input of detritus from surface sediments. The distribution of total organic matter(TOM), total organic carbon(TOC) and total organic nitrogen(TON) in surface sediments were in the ranges of 3.1~9.6%, 0.282~0.635% and 0.022~0.069%, respectively, with relatively low range in the western and northern sides of the study area. The ratio of TOC to TON of surface sediments were in the range of 9.8~17.4(average of 13), strongly indicating the active role of the input from the terrestrial organic pollutants.

• 한국위성정보통신학회논문지
• /
• 제9권1호
• /
• pp.28-32
• /
• 2014

본 논문에서 다중 경로 T-DMB 환경에서 신호검출 알고리즘을 적용하여 성능을 분석하였다. 가우시안, Rayleigh, COST 207 채널을 각각 적용하여 다중 환경에서 다양한 파라미터를 변화시켜 연구하였다. 최종 실험결과는 주파수 유무에 따라 비트화로 정의하여 비교 분석하였으며, 검출하기 위한 신호는 T-DMB 표준을 참고하여 생성하였다. 실험에 있어서 적용된 신호검출 기법은 에너지 검출 기법을 적용하였으며, 생성 신호의 길이에 따라 실험을 하였다. 실험결과로써는 다중 환경에 따른 다양한 결과값을 얻을 수 있었으며, 뿐만 아니라 신호 길이에 따른 성능 분석을 할 수 있었다. 신호의 길이가 증가할수록 검출시간이 길어져 성능과 비례함을 확인할 수 있었다. 우리는 이번 신호검출 실험을 실제 T-DMB 환경에서 적용할 수 있도록 연구를 하였다.

• 한국실내디자인학회논문집
• /
• 제19권3호
• /
• pp.22-29
• /
• 2010

Recent days, transition to ecological thought is being accelerating by environmental impact with a sustainable development. This symptom is no exception in architecture area. So is vernacular design affecting on modern architecture in many ways in terms of economical aspect and eco-friendly environment as well. Natural energy like solar power, environment, and terrestrial heat that applied in vernacular architecture is also widely accepted in name of 'sustainable energy' of which a design applied with ventilation and airing of natural wind is very useful & pragmatic in terms of economical reason. Accordingly, this study examined a relation between vernacular architecture and natural wind and compared it with traditional type and its feature of ventilation & airing. Ventilation & airing applied in the past can be divided into three categories: methods by convection, natural element, and architectural type. All these methods gave some pleasant felling indoors when there were no artificial energies. Even in modern age, such a ventilation & airing is being used with traditional type in different variety of materials, and it will be developed with modern technology without any extra cost in terms of sustainable expansion, and opened for further researches.

• 공업화학
• /
• 제32권5호
• /
• pp.487-496
• /
• 2021

Microalgae is one of the promising biodiesel feedstock with high growth rates compared to those of terrestrial oil crops. Despite its numerous advantages, biodiesel production from microalgae needs to reduce energy demand and material costs further to go to commercialization. During solvent extraction of microalgal lipids, lipid-extracted algae (LEA) cell residue is generated as an organic solid waste, about 80-85% of original algal biomass, and requires an appropriate recycling or economic disposal. The resulting LEA still contains significant amount of carbohydrates, proteins, N, P, and other micronutrients. This review will focus on recent advancement in the utilization of LEA as: (i) utilization as nutrients or carbon sources for microalgae and other organisms, (ii) anaerobic digestion to produce biogas or co-fermentation to produce CH₄ and H₂, and (iii) conversion to other forms of biofuel through thermochemical degradation processes. Possible mutual benefits in the integration of microalgae cultivation-biodiesel production-resulting LEA with anaerobic digestion and thermochemical conversion are also discussed.