• 한국측량학회지
• /
• 제39권5호
• /
• pp.343-349
• /
• 2021

In The process from design to construction in the existing construction work was less efficient due to the contradictory approach of identifying the 3D state in the plan view and the repeated generation of surveys, floor plans, drawings. Accurate 3D design data is essential for smart construction. However, most of the existing related studies have focused on explaining the development method and main functions of equipment or improving the productivity of smart construction. Therefore, in this study, the utility of 3D design model generation for smart construction and construction survey using 3D laser scanner was evaluated. Plane and vertical road alignment were created using the specifications of the road. The generated road alignment was created as a three-dimensional corridor design using cross-sections at intervals of 20m. In addition, it was possible to create a DTM (Digital Terrain Model) using a digital map and effectively create a 3D design model for the study area through overlapping. Construction survey using a 3D laser scanner showed accuracy within 10cm as a result of the accuracy evaluation. These results proved that construction surveying using a 3D laser scanner is possible because it satisfies the acceptable accuracy of the relevant regulations modeling of target areas using 3D design and construction survey using 3D laser scanner can be a way to address shortcomings of existing GNSS (Global Navigation Satellite System) methods. And accurate 3D data will be used as essential data as basic data for smart construction.

• 한국측량학회지
• /
• 제20권2호
• /
• pp.111-118
• /
• 2002

오늘날 측량장비 개발의 급속한 발전과 더불어 정밀도가 많이 향상되고 있고 컴퓨터를 이용한 지형공간정보체계기술의 발달로 더욱 정밀한 3차원 지형의 재현이 가능하게 되었다. 그런데 실제 현장에서 이루어지고 있는 면적 및 체적산출방법에 있어서는 재래적인 측량방법인 평판측량으로 지형을 만들어낸 후 구적기나 기타 다른 방법을 통해서 2차원 면적을 산출한다. 여기에 일정량의 경사보정계수를 곱하여 3차원 면적을 산출하는 방법을 사용하고 있다. 본 연구에서는 재래적인 측량방법 및 면적산출방법에 대한 비효율성 및 비정밀성을 제시하고 광파거리측량기와 GPS를 이용하여 불규칙삼각형방식과 격자형방식으로 측량을 실시하였다. 두 가지 측량데이터를 가지고 각각의 방법에 따라 3차원 지형모델을 구축한 후 2차원 및 3차원 면적을 산출하였으며 재래적인 측량방법을 이용한 면적산출량을 기준으로 불규칙삼각형방식과 격자형방식으로 산출한 면적산출량을 비교 분석함으로써 정밀하고 효율성이 높은 3차원 면적산출기법을 제시하였다.

• 자원환경지질
• /
• 제28권5호
• /
• pp.469-480
• /
• 1995

Gravity and magnetic surveys were carried out to investigate the three-dimensional configuration and characteristics of the landfills at Nanjido waste disposal site. For terrain correction and three-dimensional density inversion of gravity data an algorithm, which calculates the gravity effect of a three-dimensional body by using the solid angle method, is developed. This algorithm has been proved to give more accurate terrain correction values for the small survey area having varied topography like Nanjido site as compared with widely used methods such as Hammer's method and multiquadric equation method. Density inversion of gravity anomaly data gives very useful information about the lateral and vertical variation of the landfills, which can be used to discriminate the kinds of wastes. The average density of filled materials appears to be $1.7\;g/cm^3$ which is much higher than the value $(0.8\;g/cm^3)$ estimated by Seoul City. The lateral variation of density shows high correlation with the pattern of ongoing depression of the landfills. The northern region of the landfill no. 1, which shows low density and high depression, is closely associated with the industrial waste and sludge filled area. The magnetic anomaly data provide information about relative concentration of magnetic materials, which is also very useful to investigate characteristics of the fills. Several high positive anomaly regions on the reduced-to-pole magnetic anomaly map are appeared to be associated with the industrial waste fills, but certain industrial waste fills show low negative anomalies. This kind of magnetic information can be used in selecting drilling locations over landfills away from buried metal products during the stabilization process.

• 대한원격탐사학회지
• /
• 제35권3호
• /
• pp.447-455
• /
• 2019

기존의 식생정보는 대부분 5년 주기로 구축되어 최신성이 결여 되어있다. 식생의 조사는 사진측량과 사람의 현지조사로 이루어지며, 많은 시간과 비용을 소모하게 된다. 식생의 정보 중 식생층위구조에 대한 정보는 산림의 다양성과 환경을 평가하는 중요한 요소이다. 식생의 내부구조인 층위구조는 필수적 정보이지만, 일반적인 사진측량과 사람의 조사로는 한계점이 존재하게 된다. 본 연구에서는 KOMPSAT-3/3A/5 위성영상으로 부터 제작된 지수맵과 Texture맵, DSM(Digital Surface Model)과 DTM(Digital Terrain Model)의 차분으로 생성한 canopy정보를 Input layer로 층위자료를 인공신경망(Artificial Neural Network; ANN)을 이용하여 분류하였다. 단층과 다층의 산림의 층위 구조를 분류하여 최종분류결과 81.59% 확인하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.457-462
• /
• 2006

Coastline has been considered as fundamental geographic information of a nation. Recently, the coastlines of higher resolution and accuracy with less update period ever than before are increasingly required. This requirement cannot be easily satisfied with the most traditional methods based on field survey such as leveling or GPS measurements. The newly developed airborne LIDAR system can be used as a promising alternative since it rapidly acquire numerous three-dimensional points densely sampled from the terrain around the coastline. Hence, in this study we developed a nearly automatic method to extract the coastline from LIDAR data and applied it to real data to verify its performance. From the comparison of the extracted coastlines with those from a digital map, we conclude that the proposed method can provide more accurate and precise lines.

• 한국관개배수논문집
• /
• 제17권2호
• /
• pp.49-56
• /
• 2010

This study was carried out to survey for morphological change of lower tidal flat near Byunsan-Gosapo beach using single-beam echosounder and sound velocity profiler. Since October 2009 in the center of the region, the erosion occurred about 10~50cm, while either side of the study area is little change. Erosion occurred at the beach, each beach area in the southwest area rather than further accumulation occurred sandbank formed. Observed in the study area near the center of the erosion is the result of ongoing changes that were temporarily due to seasonal changes is not clear. However, the northwestward waves were expected to be a major source of erosion. Because of this, continue to observe the terrain and the local ocean circulation studies will be required.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.203-210
• /
• 2004

The average temperatures by the land cover class, by the elevation extent, by the slope and by the aspect have been calculated using multitemporal Landsat TM band 6 and DEM. For this, the TM band 6 data from October 21, 1985, June 2, 1992, September 1, 1996, May 7, 2000 and the 28.5m x 28.5m grid elevation data of Seoul have been used. From the varying curve of the average land surface temperature by the elevation extent, the presence of the atmospheric inversion phenomenon and the scope of the inversion layer can be inferred. Especially, the average land surface temperature by the aspect can be effective for deciding a road line. For these reasons, it is expected that temperature estimation using remote sensing data shall be effective for the survey of heat damage, environmental temperature monitoring, and urban and environmental Planning usage.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.263-266
• /
• 2010

The research design of the road for the LiDAR survey data was available, LiDAR data currently exists for this area Daejeon, Gongju area two map sheet selected of the LiDAR data and figures were produced using the DEM, respectively. The scale 1 / 5, 000 of figures produced by using the DEM and LiDAR DEM data comparing the results produced by the difference in some areas or That could be found. The accuracy of LiDAR data in the road design to use more accurate information on terrain, roads and construction of the linear installation cost savings Contribution will be considered.

• 한국측량학회지
• /
• 제20권2호
• /
• pp.105-110
• /
• 2002

본 연구에서는 항공 레이저 매핑 시스템(Airborne Laser Mapping System, ALMS)에 의해 생성된 DTM의 정확도 분석을 위해 500 m 간격으로 측점지역을 선정하고 GPS 측량을 통한 다양한 검증방법으로 DTM의 정확도를 분석하였다. ALMS에 의한 DTM의 각 점 사이의 고도값 추정을 위해 TIN을 제작하였고, GPS를 이용한 측점들의 커버리지를 제작하여 TIN과 중첩하는 방법으로 정확도를 분석하였다. ALMS에 의한 DTM의 고도값 정확도는 기존의 수치표고모델 제작방법보다 높은 것으로 확인되어 1/5000이상의 수치표고 제작에 ALMS를 적용할 수 있는 것으로 나타났다.

• Journal of Species Research
• /
• 제10권4호
• /
• pp.387-391
• /
• 2021

Araneidae Clerck, 1757 is one of the largest families within the order Araneae Clerck, 1757, comprising 3,065 species in 177 genera. To date, two species of the genus Mengora O. Pickard-Cambridge, 1889 and four species of the genus Araniella Chamberlin & Ivie, 1942 have been recorded in Korea. During a seasonal survey of the spider fauna in mountainous terrain conducted from 2018 to 2019, females of Mangora foliosa Zhu & Yin, 1998 and a male of Araniella robusta sp. nov. were collected with a sweep net between shrubs in mixed forests from Mt. Juwangsan National Park. In this paper, we provide a diagnosis of the new species and descriptions including measurements and morphological illustrations. The new species, Araniella robusta sp. nov., can be easily distinguished from other species in the genus Araniella Chamberlin & Ivie, 1942 by a branched conductor with two blunt tips and conjugation of the embolus tip and terminal apophysis.