• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.327-338
• /
• 2022

This study aims to empirically and statistically predict soil depths across areas affected by landslides. Using soil depth measurements from a landslide area in Korea, two sets of soil depths are calculated using a Z-model based on terrain elevation and a probabilistic statistical model. Both sets of calculation results are applied to derive landslide risk using the saturated infiltration depth ratio of the soil layer. This facilitates analysis of the infiltration of rainfall into soil layers for a rainfall event. In comparison with the probabilistic statistical model, the Z-model yields soil depths that are closer to measured values in the study area. Landslide risk assessment in the study area based on soil depth predictions from the two models shows that the percentage of first-grade landslide risk assessed using soil depths from the probabilistic statistical model is 2.5 times that calculated using soil depths from the Z-model. This shows that soil depths directly affect landslide risk assessment; therefore, the acquisition and application of local soil depth data are crucial to landslide risk analysis.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.4
• /
• pp.55-70
• /
• 2021

In this study, in the field of remote sensing, where the scope of application is rapidly expanding to fields such as land monitoring, disaster prediction, facility safety inspection, and maintenance of cultural properties, monitoring of rural space and surrounding environment using UAV is utilized. It was carried out to verify the possibility, and the following main results were derived. First, the aerial image taken with an unmanned aerial vehicle had a much higher image size and spatial resolution than the aerial image provided by the National Geographic Information Service. It was suitable for analysis due to its high accuracy. Second, the more the number of photographed photos and the more complex the terrain features, the more the point cloud included in the aerial image taken with the UAV was extracted. As the amount of point cloud increases, accurate 3D mapping is possible, For accurate 3D mapping, it is judged that a point cloud acquisition method for difficult-to-photograph parts in the air is required. Third, 3D mapping technology using point cloud is effective for monitoring rural space and rural resources because it enables observation and comparison of parts that cannot be read from general aerial images. Fourth, the digital elevation model(DEM) produced with aerial image taken with an UAV can visually express the altitude and shape of the topography of the study site, so it can be used as data to predict the effects of topographical changes due to changes in rural space. Therefore, it is possible to utilize various results using the data included in the aerial image taken by the UAV. In this study, the superiority of images acquired by UAV was verified by comparison with existing images, and the effect of 3D mapping on rural space monitoring was visually analyzed. If various types of spatial data such as GIS analysis and topographic map production are collected and utilized using data that can be acquired by unmanned aerial vehicles, it is expected to be used as basic data for rural planning to maintain and preserve the rural environment.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.541-550
• /
• 2022

A pre-existing landform is created by weathering and erosion along the bedrock fault and the weak zone. A neotectonic landform is formed by neotectonic movements such as earthquakes, volcanoes, and Quaternary faults. It is difficult to clearly distinguish the landform in the actual field because the influence of the tectonic activity in the Korean Peninsula is relatively small, and the magnitude of surface processes (e.g., erosion and weathering) is intense. Thus, to better understand the impact of tectonic activity and distinguish between pre-existing landforms and neotectonic landforms, it is necessary to understand the development process of pre-existing landforms depending on the bedrock characteristics. This study used a two-dimensional numerical landscape evolution model (LEM) to study the spatio-temporal development of landscape according to the different erodibility under the same factors of climate and the uplift rate. We used hill-slope indices (i.e., relief, mean elevation, and slope) and channels (i.e., longitudinal profile, normalized channel steepness index, and stream order) to distinguish the difference according to different bedrocks. As a result of the analysis, the terrain with high erosion potential shows low mean elevation, gentle slope, low stream order, and channel steepness index. However, the value of the landscape with low erosion potential differs from that with high erodibility. In addition, a knickpoint came out at the boundary of the bedrock. When researching the actual topography, the location around the border of difference in bedrock has only been considered a pre-existing factor. This study suggested that differences in bedrock and various topographic indices should be comprehensively considered to classify pre-existing and active tectonic topography.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.4
• /
• pp.35-50
• /
• 2023

As urbanization progresses, there is a growing and continuous demand for green spaces that provide ecosystem services. However, increasing the quantity of green spaces within major cities is challenging. Therefore, it is essential to pursue qualitative improvements that consider ecological characteristics of existing green spaces. In this study, we focus on local neighborhood parks in Seoul and present the following two questions through an evaluation utilizing ecological design indicators and land use data: 1. Which factor, design or location, has a greater influence on the ecological quality of neighborhood parks in Seoul? 2. Additionally, when evaluating ecological characteristics, is there similarity between assessments based on land-use data and those utilizing ecological design indicators? For this study, we conducted research on 30 neighborhood parks in Seoul and classified them into mountainous types (adjacent to mountains, natural terrain parks) and urban types (independently designed within 300m without existing forests) based on previous studies. Firstly, we conducted evaluations according to park location types. When comparing the evaluation scores of urban types (14 parks) and mountainous types (16 parks), significant differences were observed with scores of 16.86 and 35.94, respectively. Statistical analysis showed a significant difference between park types. In terms of habitat quality, the average values for urban and mountainous parks were 0.33 and 0.53, respectively, and statistically significant differences were observed between park types indicating differences in ecological potential according to park location. Secondly, when comparing the results of ecological potential evaluations based on park design and external connectivity, a correlation was found between habitat quality and total scores according to evaluation indicators. The correlation analysis showed significant linear relationships between habitat quality and total scores, biodiversity scores, and ecosystem function scores, with high positive correlation coefficients of 0.829, 0.861, and 0.802, respectively. This study holds significance in analyzing the ecological aspects of urban parks through the lens of both park location characteristics and design indicators. The analysis results underscore the importance of planning and managing ecologically sound urban parks contingent upon their location. Moreover, the utilization of appropriate ecological design indicators can help alleviate environmental limitations surrounding parks. Integrating these considerations could enhance the ecological quality and ecosystem services of urban green spaces.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.488-505
• /
• 2007

The purposes of this research are twofold; 1) to verify spatial differences of tectonic movement using the spatial distribution of earthquakes, and 2) to infer mechanisms that generate spatial accumulation patterns of earthquakes in the Korean Peninsula. The first part of this sequential paper (Park, 2007) argues that the Korean Peninsula consists of four geostructural regions in which tectonic deformation and consequent geomorphological development patterns are different from each other Since this conclusion has been made by terrain analyses alone, it is necessary to verify this suggestion using other independent geophysical data. Because earthquakes are results of movement and deformation of land masses moving in different directions, the distribution of earthquake epicenters may be used to identify the direction and rates of land mass movement. This paper first analysed the spatial distribution of earthquakes using spatial statistics, and then results were compared with the spatial arrangement of geostructural regions. The spatial distribution of earthquakes in the Korean Peninsula can be summarized as the followings; firstly, the intensity of earthquakes shows only weak spatial dependency, and shows large difference even at adjacent regions. Secondly, the epicenter distribution has a clear spatial accumulation pattern, even though the intensity of earthquake shows a random pattern. Thirdly, the high density area of earthquakes shows a clear 'L' shape, passing through Pyeongannam-do, centered at Pyeongyang, and Hwanghae-do, Seosan and Pohang. The correlation coefficient between the density of earthquakes and distance from geostructral region boundaries is much higher than those between the density of fault lines and distance from tectonic division boundaries. Since fault lines and tectonic divisions in the Korean Peninsula are the results of long-term geological development, there is an apparent scale discrepancy to find significant correlations with earthquakes. This result verifies the research hypothesis that the Korean Peninsula is divided into four geostructral regions in which each has its own moving direction and spatial deformation characteristics. The existence of geostructural regions is also supported by the movement parrerns of land masses estimated from the GPS measurements. This conclusion is expected to provide a new perspective to understand the geomorphological developments and the earthquake occurrences in the Korean Peninsula.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.52-62
• /
• 2017

Overseas landscape practices have already benefited from the awareness of BIM while landscape-related organizations are encouraging its use and the number of landscape projects using BIM is increasing. However, since BIM has not yet been introduced in the domestic field, this study investigated and analyzed overseas landscape projects and discussed the positive effects and implementation of BIM. For this purpose, landscape projects were selected to show three effects of BIM: improvement of design work efficiency, building of a platform for cooperation, and performance of topography design. These three projects were analyzed across four aspects of implementation methods: landscape information, 3D modeling, interoperability, and visualization uses of BIM. First, in terms of landscape information, a variety of building information was constructed in the form of 3D libraries or 2D CAD format from detailed landscape elements to infrastructure. Second, for 3D modeling, a landscape space including simple terrain and trees was modeled with Revit while elaborate and complex terrain was modeled with Maya, a professional 3D modeling tool. One integrated model was produced by periodically exchanging, reviewing, and finally combining each model from interdisciplinary fields. Third, interoperability of data from different fields was achieved through the unification of file formats, conversion of differing formats, or compliance with information standards. Lastly, visualized 3D models helped coordination among project partners, approval of design, and promotion through public media. Reviewing of the case studies shows that BIM functions as a process to improve work efficiency and interdisciplinary collaboration, rather than simply as a design tool. It has also verified that landscape architects could play an important role in integrated projects using BIM. Just as the introduction of BIM into the architecture, engineering and construction industries saw great benefits and opportunities, BIM should also be introduced to landscape architecture.

• Journal of the Daesoon Academy of Sciences
• /
• v.36
• /
• pp.35-78
• /
• 2020

This study aims to reveal the overall Fengshui figuration and geomantic features of Daesoon Jinrihoe's Geumgangsan (Mt. Geumgang) Toseong Training Temple Complex from the Hyeonggi (Energy of Form) Theory in Fengshui. This study first looked at the mountain landscape viewable from the surface, examined the influence of Qi (Energy) flowing inside it, comprehended the flow of its vitality in terms of its strengths and weaknesses, and gauged the depth of the energy produced from mountain streams to determine fortune and misfortune. There is a special significance to this site due to Sangje's teaching that "⋯ it will be prosperous with 12,000 Dotonggunja (Dao-empowered Sages)," and it is also known as a efficacious grounds for cultivation among ascetics due to it housing the royal mausoleum of Dojeon (interpreted by some as Maitreya). Concerning this, this study explores the geomantic symbolism and growth-supporting land of Geumgangsan Toseong Training Temple Complex as it corresponds to Fengshui theory, and in keeping with this, the topography and conditions are likewise examined. The mountain range and its energy pathways (veins) harmonize with the pure water energy coming from the East Sea. The mountain terrain of Mount Geumgang, and the geomantic location, topography, and energy pathways that influence Daesoon Jinrihoe Geumgangsan Toseong Training Temple Complex are all explored. The Baekdudaegan Mountain Range extends through Mount Geumgang to Sinseonbong Peak, and one range extends to Geumgangsan Toseong Training Temple Complex whereas the other range extends through Sangbong Peak down to Misiryeong Valley and Mount Seorak. Thus, this study demonstrates that Daesoon Jinrihoe has always strongly considered the relationship between its temple complexes and their surrounding environment. The order has always selected locations that exhibit optimal conditions which suit the construction of sacred spaces. The determinations in this paper were made through an academic approach that drew upon various theories of Fengshui while examining Daesoon Jinrihoe's Geumgangsan Toseong Training Temple Complex. The in-depth analysis was specifically based on Hyeonggi Fengshui. At the same time, this study also looked into the surroundings of Geumgangsan Toseong Training Temple Complex. In particular, the mountains and flow of nearby bodies of water were comprehensively examined to show how the surrounding topography corresponds to the principles of Fengshui. An integral approach combining all major theories of Fengshui revealed that Geumgangsan Toseong Training Temple Complex starts from Sinseonbong Peak, and its energy flows through the main mountain range, going through numerous geographical changes of yin and yang. When the range flows down, the water flows accordingly, and where the water whirls, the mountains are shaped accordingly. Eventually, this energy reaches Geumgangsan Toseong Training Temple Complex. From the organic relationship between mountains and bodies of water, which can be said to be the essence of the order of nature, it can be judged that the most prominent geomantic feature of Geumgangsan Toseong Training Temple Complex corresponds to traditional theories of Fengshui in that it forms a configuration wherein optimal water energy supports the Virtuous Concordance of Yin Yang and harmonizes the Blue Dragon with the White Tiger.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.381-392
• /
• 2011

Pollutant loads calculated with unit factor method can not identity seasonal variations of pollutant inputs. Estimation of pollutant loads considering rainfall runoff can overcome these limits. SCS curve number method was applied to estimate runoff of each event of Koeup watershed of Koheung estuary lake. SCS curve numbers were calculated based upon land use, soil types of the catchment using GIS. Point and nonpoint source pollutant loads were summed up for total loads estimation. Those from nonpoint source were estimated by multiplying the calculated runoff and expected mean concentrations (EMC) presented by the Minister of Environment of Korea. DEM can present three dimensional views of a terrain, identity stream networks and flow accumulation. Furthermore, it can examine accumulated pollutant loads of specific point of a catchment. Therefore, cell based pollutant load estimation was attempted using DEM. ArcView was utilized to collect, store and manipulate spatial and attribute data of pollutant sources and features of the catchment. Cell-based DEM which was established by the GRID module of ARC/INFO was employed to estimate flows and pollutant loads.

• Journal of Korea Water Resources Association
• /
• v.44 no.10
• /
• pp.831-841
• /
• 2011

In this study, with the assumption that the geographical characteristics of the river basin have selfsimilarity, fractal dimensions are used to quantify the complexity of the terrain. For this, Area exponent and hurst exponent was applied to estimate the fractal dimension by using spatial analysis. The result shows that the value of area exponent and hurst exponent calculated by the fractal dimension are 2.008~2.074 and 2.132~2.268 respectively. Also the $R^2$ of area exponent and hurst exponent are 94.9% and 87.1% respectively too. It shows that the $R^2$ is relatively high. After analyzing the spatial self-similarity parameter, it is shown that traditional urban area's moderate slope geographical characteristic closed to 2D fractal in Ara water way. In addition, the relation between fractal dimension and geographical elements are identified. With these results, fractal dimension is the representative value of basin characteristics.

• Journal of Korea Water Resources Association
• /
• v.53 no.7
• /
• pp.545-555
• /
• 2020

A feasibility modeling for potential hydroelectric dam site selection was suggested using 1 sec ASTGTM (ASTER Global Digital Elevation Model) and Terra/Aqua MODIS (Moderate Resolution Imaging Spectroradiometer) derived land use (MCD12Q1) data. The modeling includes DEM pre-processing of peak, sink, and flat, river network generation, watershed delineation and segmentation, terrain analysis of stream cross section and reservoir storage, and estimation of submerged area for compensation. The modeling algorithms were developed using Python and as an open source GIS. When a user-defined stream point is selected, the model evaluates potential hydroelectric head, reservoir surface area and storage capacity curve, watershed time of concentration from DEM, and compensation area from land use data. The model was tested for 4 locations of already constructed Buhang, BohyunMountain, Sungdeok, and Yeongju dams. The modeling results obtained maximum possible heads of 37.0, 67.0, 73.0, 42.0 m, surface areas of 1.81, 2.4, 2.8, 8.8 ㎢, storages of 35.9, 68.0, 91.3, 168.3×10⁶ ㎥ respectively. BohyunMountain and Sungdeok show validity but in case of Buhang and Yeongju dams have maximum head errors. These errors came from the stream generation error due to ASTGTM. So, wrong dam watershed boundary limit the head. This study showed a possibility to estimate potential hydroelectric dam sites before field investigation especially for overseas project.