• Journal of Electrochemical Science and Technology
• /
• 제6권3호
• /
• pp.95-105
• /
• 2015

In the present work, Carbon supported Pt₁₀₀, Pt₈₀Sn₂₀, Pt₈₀Ni₂₀ and Pt₈₀Sn₁₀Ni₁₀ electrocatalysts with different atomic ratios were prepared by ethylene glycol-reduction method to study the electro-oxidation of ethanol in membraneless fuel cell. The electrocatalysts were characterized in terms of structure, morphology and composition by using XRD, TEM and EDX techniques. Transmission electron microscopy measurements revealed a decrease in the mean particle size of the catalysts for the ternary compositions. The electrocatalytic activities of Pt₁₀₀/C, Pt₈₀Sn₂₀/C, Pt₈₀Ni₂₀/C and Pt₈₀Sn₁₀Ni₁₀/C catalysts for ethanol oxidation in an acid medium were investigated by cyclic voltammetry (CV) and chronoamperometry (CA). The electrochemical results showed that addition of Ni to Pt/C and Pt-Sn/C catalysts significantly shifted the onset of ethanol and CO oxidations toward lower potentials. The single membraneless ethanol fuel cell performances of the Pt₈₀Sn₁₀Ni₁₀/C, Pt₈₀Sn₂₀/C and Pt₈₀Ni₂₀/C anode catalysts were evaluated at room temperature. Among the catalysts investigated, the power density obtained for Pt₈₀Sn₁₀Ni₁₀/C (37.77 mW/cm² ) catalyst was higher than that of Pt₈₀Sn₂₀/C (22.89 mW/cm² ) and Pt₈₀Ni₂₀/C (16.77 mW/ cm² ), using 1.0 M ethanol + 0.5 M H₂SO₄ as anode feed and 0.1 M sodium percarbonate + 0.5 M H₂SO₄ as cathode feed.

• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.423-429
• /
• 2008

This work was carried out to improve the performance of anodic electrocatalysts in direct ethanol fuel cell(DEFC). PtRu and $Pt_5Ru_4M$(M= Ni, Sn, Mo and W) electrocatalysts were prepared by using a $NaBH_4$ reduction method. Alloy crystal structure and particle size of electrocatalysts were characterized by X-ray diffraction(XRD) and transmission electron microscopy(TEM). The XRD analysis of the electrocatalysts revealed that the face-centered cubic(fcc) peaks shifted to slightly higher diffraction angles when third metals were added. Average size of the uniform particles was observed to be approximately $3{\sim}3.5\;nm$ from the TEM image. The electrochemical measurements were carried out in the solution 1M $H_2SO_4$ and 1M $C_2H_5OH$ at room temperature. Cyclic-voltammogram results showed that $Pt_5Ru_4W$ electrocatalyst exhibited much higher current density for ethanol oxidation of $2.73\;mA/cm^2$ than PtRu electrocatalyst of $0.73\;mA/cm^2$.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.284-290
• /
• 2019

Ternary MoS₂/graphene (G)-TiO₂ photocatalysts were prepared by a simple hydrothermal method. The morphology, phase structure, band gap, and catalytic properties of the prepared samples were investigated by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, UV-vis spectrophotometry, and Brunauer-Emmett-Teller surface area measurement. The H₂ production efficiency of the prepared catalysts was tested in methanol-water mixture under visible light. MoS₂/G-TiO₂ exhibited the highest activity for photocatalytic H₂ production. For 5 wt.% and 1 wt.% MoS₂ and graphene (5MT-1G), the production rate of H₂ was as high as 1989 µmol^-1h^-1. The catalyst 5MT-1G showed H₂ production activity that was ~ 11.3, 5.6, and 4.1 times higher than those of pure TiO₂, 1GT, and 5MT, respectively. The unique structure and morphology of the MoS₂/G-TiO₂ photocatalyst contributed to its improved hydrogen production efficiency under visible light.

• 공업화학
• /
• 제23권6호
• /
• pp.561-566
• /
• 2012

PtRuW/C 촉매를 Pt : Ru : W 비를 5 : 4 : 1, 2 : 1 : 1, 1 : 1 : 1, 1 : 2 : 2로 각각 합성하였다. 촉매의 조성은 EDX분석을 통해 이론값과 비슷하다는 것을 확인하였다. TEM분석과 XRD분석으로부터 3.5~5.5 nm의 균일한 입자 크기 및 결정질 분포를 가지고 있음을 확인하였다. 유효표면적, 전류밀도, 고유 활성 및 피독률과 같은 전기화학적 특성은 CO 스트리핑, 선형쓸음 전기량 측정법, 대시간 전류법 등과 같은 방법으로 분석하였다. 이러한 분석으로부터, $PtRu_2W_2/C$를 제외한 촉매는 상업촉매보다 우수한 반응성과 안정성을 가지고 있음을 확인하였다. 이 중 가장 우수한 촉매는 $Pt_5Ru_4W/C$였으며, $121.05mA{\cdot}m^{-2}$의 specific activity와 $0.01%{\cdot}s^{-1}$의 피독률을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1241-1246
• /
• 2010

Ternary Cu/ZnO/$Al_2O_3$ catalysts were prepared by a co-precipitation method. The precursor structures were monitored during the aging. The first precipitate structure was amorphous georgeite, which transformed into the unknown crystalline structure. The transition crystalline structure was assigned to the crystalline georgeite, which was suggested with elemental analysis, IR and XRD. The final structure of precursors was malachite. The Cu surface area of the resulting Cu/ZnO/$Al_2O_3$ was maximized to be 30.6 $m^2$/g at the aging time of 36 h. The further aging rapidly decreased Cu surface areas of Cu/ZnO/$Al_2O_3$. ZnO characteristic peaks in oxide samples almost disappeared after 24 h aging, indicating that ZnO was dispersed in around bulk CuO. TOF of the prepared catalysts of the Cu surface area ranges from 13.0 to 30.6 $m^2/g_{cat}$ was to be 2.67 ${\pm}$ 0.27 mmol/$m^2$.h in methanol synthesis at the condition of $250^{\circ}C$, 50 atm and 12,000 mL/$g_{cat}$. h irrespective of the XRD and TPR patterns of CuO and ZnO structure in CuO/ZnO/$Al_2O_3$. The pH of the precipitate solution during the aging time can be maintained at 7 by $CO_2$ bubbling into the precipitate solution. Then, the decrease of Cu surface area by a long aging time can be prevented and minimize the aging time to get the highest Cu surface area.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.164-167
• /
• 2000

Flue gases in the iron foundry consist of 15~20% CO2 as an air pollution gas whose emission should be mitigated in order to protect the environment. In the present study, ultrafine powders of NixZn1-xFe2O4 as a potential catalyst for the CO2 decomposition were prepared by the coprecipitation methods. Oxygen deficient ferrites (MeFe2O4-$\delta$) can decompose CO2 as C and O2 at a low temperature of about 30$0^{\circ}C$. The XRD result of synthesized ferrites showed the spinel structure of ferrites and ICP-AES and EDS quantitative analyses showed the composition similar with initial molar ratios of the mixed solution prior to reaction. The BET surface area of the (Ni, Zn)-ferrites was about 77~89.5$m^2$/g and their particle size was observed about 10~20 nm. The CO2 decomposition efficiency of the oxygen deficient (Nix, Zn1-x)-ferrites was the highest at x=0.3, and the ternary (Ni, Zn)-ferrites was better than that of binary Ni-ferrites.

• 전기화학회지
• /
• 제11권2호
• /
• pp.109-114
• /
• 2008

에탄올이 이산화탄소가 생성되는 경로로 반응할 경우 12개의 전자를 발생시키게 되지만 실제로는 두 개의 탄소 원자사이의 결합력 때문에 완전 산화시키는 것이 쉽지 않다. 따라서 고성능 에탄을 산화촉매의 개발은 에탄을 연료전지 실용화에 필수적이다. 본 연구는 Pt에 Sn, Au을 첨가하여 이원계, 삼원계 촉매를 제조하여 에탄올에서의 활성과 촉매의 특성에 대한 분석을 수행하였다. 촉매합성은 modified polyol 방법을 이용하였으며 Vulcan XC-72R 담지체를 사용하여 20 wt%로 담지하였다. PtSn/c 합금촉매는 Pt : Sn의 비율이 1 : 0, 4 : 1, 3 : 1, 2 : 1, 1.5 : 1, 1 : 1, 1 : 1.5으로 합성하였으며, PtSnAu/C 합금촉매는 Pt : Sn : Au의 비율을 5 : 5 : 0, 5 : 4 : 1, 5 : 3 : 2, 5 : 2 : 3으로 합성하였다. 촉매특성은 XRD, TEM 분석을 통해 분석한 결과 $1.9{\sim}2.4\;nm$ 정도의 입자의 크기와 면심입방구조의 구조를 가지는 것으로 확인하였다. 에탄올 산화에 대한 합금촉매의 활성은 순환전류전압법으로 실험하였고, 그 중 가장 높은 성능을 가진 PtSn(1.5 : 1)/C와 PtSnAu(5 : 2 : 3)/C 합금촉매를 단위전지 성능평가륵 통해 실제 연료전지 구동환경에서 촉매의 활성을 측정하였다. 그 결과 에탄을 산화에 가장 높은 성능을 나타낸 촉매는 PtSn/c(1.5 : 1)이었고, 촉매의 안정성은 PtSnAu/C(5 : 2 : 3)에서 높게 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.440-440
• /
• 2012

Nanomaterials have emerged as new building blocks to construct light energy harvesting assemblies. Size dependent properties provide the basis for developing new and effective systems with semiconductor nanoparticles, quantized charging effects in metal nanoparticle or their combinations in 2 and 3 dimensions for expanding the possibility of developing new strategies for photovoltaic system. As top-down approach, we developed a simple and effective method for the large scale formation of self-assembled Cu(In,Ga)$Se_2$ (CIGS) nanostructures by ion beam irradiation. The compositional changes and morphological evolution were observed as a function of the irradiation time. As the ion irradiation time increased, the nano-dots were transformed into a nano-ridge structure due to the difference in the sputtering yields and diffusion rates of each element and the competition between sputtering and diffusion processes during irradiation. As bottom-up approach, we developed the growth of CIGS nanowires using thermal-chemical vapor deposition (CVD) method. Vapor-phase synthesis is probably the most extensively explored approach to the formation of 1D nanostructures such as whiskers, nanorods, and nanowires. However, unlike binary or ternary chalcogenides, the synthesis of quaternary CIGS nanostructures is challenging because of the difficulty in controlling the stoichiometry and phase structure. We introduced a method for synthesis of the single crystalline CIGS nanowires in the form of chalcopyrite using thermal-CVD without catalyst. It was confirmed that the CIGS nanowires are epitaxially grown on a sapphire substrate, having a length ranged from 3 to 100 micrometers and a diameter from 30 to 500 nm.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2737-2742
• /
• 2011

Ring-opening metathesis polymerization (ROMP) of an ethyl-substituted tetracyclododecene (8-ethyltetracyclo[$4.4.0.1^{2,5}.1^{7,10}$] dodec-3-ene, Et-TCD) was carried out in the presence of a ternary catalyst system consisting of $WCl_6$, triisobutyl aluminium (iso$Bu_3Al$), and ethanol. The optimal molar ratio of Et-TCD/$WCl_3$/iso-$Bu_3Al$/ethanol was found as 500/1/3/2 at which the yield of ring-opened polymer was 100%. 1-Hexene was shown to be an effective molecular weight controlling agent for ROMP reaction of Et-TCD. The hydrogenation of the ring opened polymer (p-Et-TCD) was conducted successfully using Pd(5 wt %)/${\gamma}$-$Al_2O_3$ at $80^{\circ}C$ for 1 h. Chemical structures of p-Et-TCD and its hydrogenated product($H_2$-p-Et-TCD) were characterized using 2D NMR techniques ($^1H-^1H$ COSY and $^1H-^{13}C$ HSQC). The changes of physical properties such as thermal stability, glass transition temperature and light transmittance after the hydrogenation were also investigated using TGA, DSC, and UV.

• 청정기술
• /
• 제20권1호
• /
• pp.7-12
• /
• 2014

이원계 및 삼원계 금속산화물 촉매에서 프로필렌 글리콜의 글리세롤의 전환반응을 행하였다. Cu/Zn 및 Cu/Cr 혼합산화물 촉매에서는 단일 금속 산화물에 비해 글리세롤의 전환율과 프로필렌 글리콜의 선택도가 증가하였다. 또한, Cu/Zn 촉매에 Al이 첨가된 혼합산화물 촉매에서는 글리세롤의 전환율과 프로필렌 글리콜의 선택도가 매우 크게 증가하였다. 반응온도가 증가함에 따라 글리세롤의 전환율은 점차 증가하지만 프로필렌 글리콜의 선택도는 $200^{\circ}C$에서 최대값을 보이다가 $250^{\circ}C$에서는 오히려 감소하였다. 글리세롤의 농도가 커질수록 글리세롤의 전환율과 프로필렌 글리콜의 선택도가 감소하였다.