• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.41-49
• /
• 2020

상온에서 발생하는 1, 2성분계 무시멘트 콘크리트의 강도저하 문제를 개선하기 위해 시멘트를 실리카 흄, 플라이애시, 고로슬래그 미분말로 치환한 3성분계 무시멘트 콘크리트의 슬럼프와 압축강도 특성을 통해 비교분석을 실시하여 다음과 같은 결론을 얻었다. 3성분계 무시멘트 콘크리트는 2성분계에 비해 높은 압축강도를 나타냈으며 실리카 흄을 10% 혼입한 경우 슬럼프 감소가 적은 것으로 나타났다. 또한, 삼각조성도를 통해 슬럼프 및 압축강도 수준별 각 무기결합재의 적정 구성비율 범위를 제시하였다.

• Journal of Pharmaceutical Investigation
• /
• 제31권1호
• /
• pp.19-25
• /
• 2001

The purpose of this study was to use a ternary polymeric matrix system for high drug loading of a highly soluble drug for controlled release delivery. The controlled drug delivery of diltiazem HCl (solubility > 50% in water at $25^{\circ}C$) with high loading dose (the final loading dose of drug was 34%) from a ternary polymeric matrix (gelatin, pectin, HPMC) was successfully accomplished. This simple monolithic system with 240 mg drug loading provided near zero-order release over a 24 hour-period by which time the system was completely dissolved. The release kinetics of diltiazem HCl tablet with high loading dose from the designed ternary polymeric system was dependent on the ratios of HPMC : pectin binary mixture. The release rate increased as pectin : HPMC ratio were increased. Swelling behavior of the ternary system and the ionic interaction of formulation components with cationic diltiazem molecule appear to control drug diffusion and the release kinetics. Comparable release profiles between commercial product and the designed system were obtained. The binding study between gelatin with diltiazem HCl showed the presence of two binding sites for drug interaction with subsequent controlled diffusion upon swelling. This designed delivery system is easy to manufacture and drug release behavior is highly reproducible and offers advantages over the existing commercial product.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.303-310
• /
• 2003

The phase behavior of binary blends of dimethylpolycarbonate-tetramethyl polycarbonate (DMPCTMPC) copolycarbonates and styrene-acrylonitrile (SAN) copolymers has been examined and then compared with that of DMPC/TMPC/SAN ternary blends having the same chemical components and compositions except that the DMPC and TMPC were present in the form of homopolymers. Both binary and ternary blends were miscible at certain blends compositions, and the miscible blends showed the LCST-type phase behavior or did not phase separated until thermal degradation temperature. The miscible region of binary blends is wider than that of the corresponding ternary blends. Furthermore, the phase-separation temperatures of miscible binary blends are higher than those of miscible ternary blends at the same chemical compositions. To explain the destabilization of polymer mixture with the increase of the number of component, interaction energies of binary pairs involved in these blends were calculated from the phase separation temperatures using lattice-fluid theory and then the phase stability conditions for the polymer mixture was analyzed with volume fluctuation thermodynamics.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.62-68
• /
• 2003

Thermotropic liquid crystalline polymer (TLCP)/poly(ethylene 2,6-naphthalate) (PEN)/poly(ethylene terephthalate) (PET) ternary blends were prepared by melt blending, and were melt-spun to fibers at various spinning speeds in an effort to improve fiber performance and processability. Structure and property relationship of TLCP/PEN/PET ternary blend fibers and effects of annealing on those were investigated. The mechanical properties of ternary blend fibers could be significantly improved by annealing, which were attributed to the development of more ordered crystallites and the formation of more perfect crystalline structures. TLCP/PEN/PET ternary blend fibers that annealed at 18$0^{\circ}C$ for 2 h, exhibited the highest values of tensile strength and modulus. The double melting behaviors observed in the annealed ternary blend fibers depended on annealing temperature and time, which might be caused by different lamellae thickness distribution as a result of the melting-reorganization process during the DSC scans.

• International Journal of Concrete Structures and Materials
• /
• 제7권3호
• /
• pp.239-249
• /
• 2013

In the present scenario to fulfill the demands of sustainable construction, concrete made with multi-blended cement system of OPC and different mineral admixtures, is the judicious choice for the construction industry. Silica fume (SF) and fly ash (FA) are the most commonly used mineral admixtures in ternary blend cement systems. Synergy between the contributions of both on the mechanical properties of the concrete is an important factor. This study reports the effect of replacement of OPC by fly ash (20, 30, 40 and 50 % replacement of OPC) and/or silica fume (7 and 10 %) on the mechanical properties of concrete like compressive strength and split tensile strength, with three different w/b ratio of 0.3, 0.4 and 0.45. The results indicate that, as the total replacement level of OPC in concrete using ternary blend of OPC + FA + SF increases, the strength with respect to control mix increases up to certain replacement level and thereafter decreases. If the cement content of control mixes at each w/b ratio is kept constant, then as w/b ratio decreases, higher percentage of OPC can be replaced with FA + SF to get 28 days strength comparable to the control mix. A new method was proposed to find the efficiency factor of SF and FA individually in ternary blend cement system, based on principle of modified Bolomey's equation for predicting compressive strength of concrete using binary blend cement system. Efficiency factor for SF and FA were always higher in ternary blend cement system than their respective binary blend cement system. Split tensile strength of concrete using binary and ternary cement system were higher than OPC for a given compressive strength level.

• 콘크리트학회논문집
• /
• 제20권4호
• /
• pp.439-449
• /
• 2008

혼화재를 사용한 혼합콘크리트는 콘크리트의 품질을 개선시키며 지속가능한 콘크리트구조물의 건설에도 기여하고 있다. 실리카퓸 (SF), 고로슬래그미분말 (GGBS), 플라이애쉬 (PFA) 등의 시멘트계 결합재는 고성능콘크리트의 혼화재로서 인식이 증가되고 있으나, 삼성분계 혼합콘크리트에 대한 연구는 매우 제한적이며, 특히 염해에 의한 부식저항성 측면에서의 연구는 상당히 취약한 실정이다. 본 연구에서는 보통포틀랜드시멘트의 경우를 50%의 치환율로 고정한 후 고로슬래그미분말의 경우는 $20{\sim}40%$, 실리카퓸의 경우에는 $5{\sim}15%$, 플라이애쉬의 경우는 $10{\sim}45%$로 치환한 경우의 각종 배합에 의한 염해부식저항성에 관한 실험연구를 수행하였다. 삼성분계 혼합콘크리트의 염해부식저항성을 평가한 본 연구에서는, 수행 실험으로서 부식 저항성 실험, 염소이온 고정화 능력 실험, 급속 염화물 촉진 실험, 산중성화 저항 능력 실험 등을 수행하였다. 연구 결과로서, 삼성분계 콘크리트는 미세구조를 치밀화 하여 염소이온의 이동을 지연시키고 있음을 확인하였다. 또한, 염분을 함유한 삼성분계 혼합콘크리트 내의 염소이온 고정화 능력 및 산중성화 저항 능력이 크게 개선되고 있음을 확인하여 염해에 대한 부식 저항성이 향상됨을 알 수 있었다.

• 디지털콘텐츠학회 논문지
• /
• 제17권6호
• /
• pp.461-469
• /
• 2016

본 논문에서는 t = 2인 3진 BCH 코드를 기반으로 하는 새로운 스테가노그라피 방법을 제시한다. 제안 된 방법에서는 JPEG 영상으로부터 추출된 DCT 계수들에 데이터 은닉을 하기 위해 t = 2인 강력한 BCH 코드를 사용하였다. 제안하는 데이터 은닉 기술은 삼진 BCH 코드(t=2인 경우)에서 다양한 해결책을 찾기 위한 접근으로 제안된 룩업테이블을 사용하였다. 고안된 룩업 테이블 접근법은 데이터 은닉을 위해 수정이 필요한 DCT 계수들의 위치를 빠르고 효율적으로 연산 가능하게 하였다. 제시된 데이터 은닉 기술은 삼진 BCH 코드를 이용하는 최초의 스테가노그라피 기술이다. 실험 결과를 통해 이진 BCH 코드에 비해 삼진 BCH 코드를 사용하는 것이 우수함을 명확하게 증명하였다.

• Elastomers and Composites
• /
• 제31권5호
• /
• pp.341-346
• /
• 1996

The fracture mechanics investigation of the thermoplastic vulcanizates(TPV) from EPDM and PP/Ionomer ternary blends was performed in terms of the J-integral by measuring fracture energy via the locus method. The TPV from ternary blends consisting of EPDM, PP and ionomer were prepared in a laboratory integral mixer by blending and vulcanizing simultaneously. Vulcanization was performed with dicumyl peroxide (DCP) and the composition of EPDM and PP was fixed at 50/50 by weight. Two kinds of poly(ethylene-co-methacrylic acid) (EMA) lonomers were used. The J-integral values at crack initiation, Jc, of the dynamically vulcanized EPDM and PP/EMA Ionomer ternary blends were affected by the cation types $(Na^+\;or\;Zn^{2+})$ and contents(5-20wt%) of the added EMA Ionomers. The ternary blend containing 20wt% zinc-neutralized EMA Ionomer and 1.0phr DCP showed the highest Jc values of the blends.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.859-860
• /
• 2006

TiC-$TiB_2$-SiC system was a ternary eutectic, whose eutectic composition was 34TiC-$22TiB_2$-44SiC (mol%). TiC-$TiB_2$-SiC ternary eutectic composite were synthesized by a floating zone method using TiC, $TiB_2$ and SiC powders as starting materials. The TiC-$TiB_2$-SiC eutectic composite showed a lamellar texture. TiC(022), $TiB_2(010)$ and SiC(111) of the eutectic composite were perpendicular to the growth direction. TiC-$TiB_2$-SiC ternary eutectic composite had specific relationship among the crystal planes: TiC[011]//$TiB_2[010]$//SiC[112], TiC(200)//$TiB_2$(001)//SiC(402) and $TiC(1\bar{1}1)$//$TiB_2(101)$//SiC(220).

• 한국정보통신학회논문지
• /
• 제11권3호
• /
• pp.491-499
• /
• 2007

본 논문에서는 Reed-Muller 전개식에 의한 3치 논리 회로를 설계하는 한 가지 방법을 제시하였다. 제시된 3치 논리 회로의 설계 방법은 Reed-Muller 전개식의 계수에 대하여 모든 변수의 차수를 검사하여 RME 모듈(Reed-Muller Expansions module)의 수를 최소화하는 최적의 제어 입력 변수의 순서를 결정한다. 최적의 제어 입력 변수의 순서는 회로 비용 행렬의 계산에 사용되며, 이 회로 비용 행렬의 계산 결과를 이용하여 Reed-Muller 전개식에 의한 RME 모듈의 나무 구조의 3치 논리 회로를 설계한다. 제시된 방법은 최적 제어 입력 변수를 찾는데 유일하게 단위시간 내에 수행되며, 컴퓨터 프로그램이 가능하고, 프로그래밍 수행 시간이 $3^n$이다.