• 한국전문물리치료학회지
• /
• 제30권2호
• /
• pp.110-119
• /
• 2023

Background: Osteoarthritis is a common condition with an increasing prevalence and is a common cause of disability. Osteoarthritic pain decreases the quality of life, and simple gait training is used to alleviate it. Knee osteoarthritis limits joint motion in the sagittal and lateral directions. Although many recent studies have activated orthotic research to increase knee joint stabilization, no study has used patellar tendon straps to treat knee osteoarthritis. Objects: This study aimed to determine the effects of patellar tendon straps on kinematic, mechanical, and electromyographic activation in patients with knee osteoarthritis. Methods: Patients with knee osteoarthritis were selected. After creating the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), leg length difference, Q-angle, and thumb side flexion angle of the foot were measured. Kinematic, kinetic, and muscle activation data during walking before and after wearing the orthosis were viewed. Results: After wearing the patellar tendon straps, hip adduction from the terminal stance phase, knee flexion from the terminal swing phase, and ankle plantar flexion angle increased during the pre-swing and initial swing phases. The cadence of spatiotemporal parameters and velocity increased, and step time, stride time, and foot force duration decreased. Conclusion: Based on the results of this study, the increase in plantar flexion after strap wearing is inferred by an increase due to neurological mechanisms, and adduction at the hip joint is inferred by an increase in adduction due to increased velocity. The increase in cadence and velocity and the decrease in gait speed and foot pressure duration may be due to joint stabilization. It can be inferred that joint stabilization is increased by wearing knee straps. Thus, wearing a patellar tendon strap during gait in patients with knee osteoarthritis influences kinematic changes in the sagittal plane of the joint.

• The Journal of Korean Physical Therapy
• /
• 제25권2호
• /
• pp.117-125
• /
• 2013

Purpose: The purpose of this study was to investigate changes in movement strategies of lower limb joints depending on the type of heel during sit-to-stand. Methods: Twenty healthy females participated in this study. All subjects performed sit-to-stand three times each with three different types of heels - bare feet, 9 cm high-heeled shoes, and unstable shoes. Trails were conducted in random order. Three-dimensional motion analysis systems were used for collection and analysis of the kinematic data of lower limb movements. Results: Results of this study showed kinematic differences in pelvis, hip joints, knee joints, and ankle joints during sit-to-stand based on the type of heels. At the initial sit-to-stand, hip joint flexion, knee joint flexion, ankle joint flexion, and ankle joint inversion showed significant differences. The maximal angles of hip joint flexion, hip joint adduction, knee joint flexion, ankle joint flexion, and ankle joint inversion were significantly different, while hip joint adduction, pelvic forward tilt, hip joint rotation, knee joint flexion, ankle joint flexion, and ankle joint inversion differed significantly during the terminal of sit-to-stand. Conclusion: Therefore, the type of heel played an important role in selection of lower limb movements during sit-to-stand which were essential parts of daily life movements.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 추계 학술발표회 논문집
• /
• pp.73-78
• /
• 2003

This presentation derives a distribution function of the terminal value and running maximum of two-dimensional Brownian motion {X(t) = (X$_1$(t), X$_2$(T))', t > 0}. One random variable of the joint distribution is the terminal time value of the Brownian motion {X$_1$(t), t > 0}. The other random variable is the partial-time running maximum of the Brownian motion {X$_2$(t), t > 0}. With this distribution function, this presentation also derives an explicit pricing formula for a barrier option whose monitoring period of the option starts at an arbitrary date and ends at another arbitrary date before maturity.

• 한국경영과학회지
• /
• 제14권1호
• /
• pp.88-96
• /
• 1989

General measure in the reliability is the k-terminal reliability, which is the probability that the specified vertices are connected by the working edges. To compute the k-terminal reliability components are usually assumed to be statistically independent. In this study the modeling and analysis of the k-terminal reliability are investigated when dependency among components is considered. As the size of the network increases, the number of the joint probability parameter to represent the dependency among components is increasing exponentially. To avoid such a difficulty the structured-event-based-reliability model (SERM) is presented. This model uses the combination of the network topology (physical representation) and reliability block diagram (logical representation). This enables us to represent the dependency among components in a network form. Computational algorithms for the k-terminal reliability in SERM are based on the factoring algorithm Two features of the ractoring algorithm are the reliability preserving reduction and the privoting edge selection strategy. The pivoting edge selction strategy is modified by two different ways to tackle the replicated edges occuring in SERM. Two algorithms are presented according to each modified pivoting strategy and illustrated by numerical example.

• 한국공간구조학회논문집
• /
• 제15권4호
• /
• pp.49-56
• /
• 2015

The roof grid of single-layer space frame structure, for Energy Core of Incheon Airport Second Terminal, is very simple and aesthetic, but it is apt to buckle under external force because of mild curvature and complex shape. The object of this study is to estimate the stability of single-layer space frame structures for Energy Core of Incheon Airport Second Terminal with the analytical conditions of structural design. The results show that the buckling load of model(pin-pin, uniform load, rigid joint), that is, the most similar model to the analytical conditions of structural design. was $10.7kN/m^2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.371-371
• /
• 2009

For the application of superconducting wires to fault current limiting devices, it is required that they have a high rated voltage when a fault occurs. Stabilizer-free coated conductors, particularly, shows a good performance for the high rated voltage, which is beyond 0.6 V/cm. In this study, using the stabilizer-free coated conductors, we made fault current limiting devices and examined their characteristics. Fault current limiting devices were fabricated with a shape of the cylinder of a mono-filar coil winding. Stabilizer-free coated conductors were wound along the mono-filar coil line and the terminal parts between the wire and metal were soldered using In solder. Two kinds of devices were fabricated by a different method in the terminal joint, one was made by a soldering and the other was made by a soldering-free joint. Critical currents and resistance at the joint parts were measured. In addition, long-time current flowing tests were also carried out for the characterization of the fault current limiting devices.

• 정보처리학회논문지C
• /
• 제12C권2호
• /
• pp.235-242
• /
• 2005

최근 무선망 수요가 급증함에 따라 무선 단말기의 전원 효율을 높이고 망의 오버헤드를 줄여야 하는 문제가 대두 되었다. 이를 위해 국내의 차세대 IP 패킷 무선망으로써 연구되고 있는 HPi(High Speed Portable Internet) 망에서의 페이징 기법 및 공유 AP를 갖는 페이징 영역 구조를 제안한다. HPi 망에서의 페이징 기법 적용은 dormant 상태 단말의 지역적 이동에 따른 등록 절차 비용 감소 및 공유 AP 설치로 인한 단말의 위치보고 비용의 감소라는 이점을 얻을 수 있다. 본 논문에서 제안한 기법은 단말 사용자 측면에서의 전원 효율을 높이는 장점과 관리자 측면에서의 망 오버헤드 감소 및 단말 이동패턴 변경에 따른 공유 AP의 손쉬운 재설정 이라는 이점을 가져온다.

• 한국운동역학회지
• /
• 제15권1호
• /
• pp.177-195
• /
• 2005

The purpose of this study was to analyze the kinematic variables of ankle joints and EMG signal of the lower limbs muscle activity for the different walking speed. The subjects were 6 males of twenties. It was classified into three different walking speed-0.75m/s, 1.25m/s, 1.75m/s. The walking performances were filmed by high speed video camera and EMG signal was gained by ME3000P8 Measurement Unit. Tibialis anterior(TA), Gastrocnemius medial head(GM), Gastrocnemius lateral head(GL), Ssoleus(SO) were selected for the dorsiflexion and plantarflexion of the ankle joint. The result of this study were as follows: 1. In the gait cycle, The time parameters for the phases were showed significant difference without the terminal stance phase and terminal swing phase for the different walking speed. 2. The angle of ankle joint was no significant difference for each time point and MDF, MPF but increasing walking speed the angle had the increasing pattern slightly. 3. The angular velocity of ankle joint was showed the significant difference for LHC, RTO, RKC, LHU, MPF and MDF point along the walking speed. 4. TA was showed about 2-3 times muscle activity at the 1.75m/s than 1.25m/s in some phases. And it was showed the similar muscle activity between the 0.75m/s and 1.25m/s but, showed a little much muscle activity in the 0.75m/s. GM was showed about 2-3 times muscle activity in the 1.75m/s than 1.25m/s, and even much muscle activity at the 0.75m/s than 1.25m/s in some phases. GL was showed increasing pattern of muscle activity specially in the initial swing phase as the walking speed increased. SO was showed about 3 times muscle activity in the 1.75m/s than 1.25m/s during the plantarflexion of ankle joint. It was showed the similar muscle activity between the 0.75m/s and 1.25m/s but, showed a little much muscle activity in the 1.25m/s.

• 근관절건강학회지
• /
• 제20권3호
• /
• pp.214-224
• /
• 2013

Purpose: The purpose of this study was to identify the differences in preference for terminal care between hospitalized patients and nurses. Methods: A cross-sectional descriptive design was used in 79 patients and 107 nurses. The data were collected from August to October 2011, using the Preference for Care near the End of life Scale - Korean Version (PCEOL-K) with 5-point scale of 26 items. The reliability of the tool was Cronbach's ${\alpha}=.74$. Results: The mean score (SD) of PCEOL-K's sub-dimensions in nurses' priority was: (a) pain $3.70{\pm}0.63$, (b) spirituality $3.63{\pm}0.61$, (c) family $3.40{\pm}0.70$, (d) autonomous decision making $2.30{\pm}0.66$, and (e) decision making by healthcare professionals $2.14{\pm}0.64$. In patients' priority, the $M{\pm}SD$ score of each sub-dimension was: (a) pain $3.86{\pm}0.65$, (b) family $3.83{\pm}0.57$, (c) decision making by healthcare professionals $3.37{\pm}0.85$, (d) spirituality $3.01{\pm}0.80$, and (e) autonomous decision making $2.43{\pm}0.63$. Results indicated significant differences between nurses and patients regarding decision making by healthcare professionals (t=-11.28, p<.001), family (t=-4.66, p<.001), and spirituality (t=5.71, p<.001). Conclusion: The PCEOL-K of patients was higher than nurses'. A terminal care program for hospitalized patients at the end of life should be planned according to the results of PCEOL-K in nurses and patients.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.104-110
• /
• 2001

Since the strand-to-strand type joint far CICC (Cable-In-Conduit Conductor) is small in size and has low DC resistance, it is expected to be useful type fur a superconducting magnet system which had a compact structure like the KSTAR (Korea Superconducting Tokamak Advanced Research) coil system. The DC resistance is changed according to the distribution patterns of strands in cables connected together in the joint. A commercial code was used for the calculation of the DC resistance. With the decrease of outer diameter of the Joint, Which means the increase of strand volume fraction in the joint, the calculated DC resistance decrease rapidly and non-lineally. The variation of resistance depends mainly on the volume fraction of solder which has higher resistivity than copper. The resistance decrease inversely with the increase of the length of the joint. The resistance increase with increase of number of triplets in each stack contacted with that of another terminal cable. In case of the strand-to-strand joint that has 62mm of outer diameter, 52mm of inner diameter, 100mm of overlap length, and four triplets in each stack, the calculated DC resistance is less than 1 n-Ohm.