• 대한방사선기술학회지:방사선기술과학
• /
• 제24권2호
• /
• pp.5-11
• /
• 2001

Most of X-ray generator had used rectifier type transformer with high tension generator which is supplied in a clinical diagnosis. Because the ripple rate of tube voltage is high, X-ray generating efficiency is very low. In these days, high tension generator for inverter type X-ray generator is being supplied from a broad which uses semi-conductor switching element for the electric power that have a high speed switching ability to solve these problem. But, semi-conductor element with large capacity is used with X-ray tube's large consumption power and diffusion is difficult in the small size hospital because production cost is going up by doing digital control through DSP. Therefore, this paper designed and manufactured CR type voltage divider for feedback control of tube voltage with high frequency resonance type inverter and for high tension transformer with high frequency. It was to make economical diffusion type X-ray generator which has wide output voltage and load extent. It was preyed that the X-ray generator had the stability of X-ray tube's output characteristics.

• 한국강구조학회 논문집
• /
• 제27권1호
• /
• pp.53-61
• /
• 2015

인장이음은 고장력 볼트의 체결력과 모재 그리고 고장력 볼트의 내력을 직접적으로 활용하고, 볼트구멍의 가공수나 체결개소의 감소, 피로저항성 등에 있어 유리하며 때문에 역학적으로 매우 효율적인 연결이다. 이러한 인장이음은 교량의 거더와 가로보의 이음, 주탑의 수평이음, 보-기둥 연결부, 바닥판 단부 2차부재 연결부, 브라켓 등에 적용될 수 있다. 본 연구에서는 인장이음의 역학적 거동을 파악하기 위해서 T-인장이음에 대한 정적실험을 수행하였다. 시험변수는 고장력 볼트의 직경, 플렌지 두께 및 체결력 감소이며, 인장이음의 파괴양상과 내력, 플랜지 두께와 고장력 볼트의 직경의 영향, 체결력의 영향에 대해 분석하였다.

• 한국방재안전학회논문집
• /
• 제15권3호
• /
• pp.67-77
• /
• 2022

국내에서는 I형 거더의 장경간화를 위한 수단으로써 U형 거더 개발을 시도하였으나, 포스트텐션 긴장방식에 따라 큰 자중으로 인하여 30 m이하 철도교 적용 사례가 대표적이며, 도로교는 시공 편의성과 보급성 논리에 따라 U형 거더의 적용 사례는 많지 않다. 본 연구는 이러한 포스트텐션 방식에 제한을 두지 않고 프리텐션 방식을 적용하여 단면 감소에 따른 자중 감소와 사용재료 절감을 유도하고자 한다. 또한, U형 거더 내부 반력대를 이용한 현장 프리텐션 긴장방법을 적용하고자 한다. 프리스트레스트 콘크리트 U형 단면 거더 교량은 콘크리트 바닥판 슬래브와 합성단면으로 구성된다. 단면이 폐합되어 개방형 단면인 PSC I형 대비 저항 강성 등의 구조적 성능향상과 제작 및 가설 단계에서 시공의 안전성 증대, 그리고 자중 경감에 기인하는 형고비 감소와 교량의 미적 경관성 확보가 가능하여 매우 효율적이고 경제적인 교량이다. 이로 인하여 고품질의 공장제작 부재와 현장에서 일체 타설로 효율적인 시공이 가능할 것으로 기대된다. 본 논문에서는 프리텐션 현장 긴장 방식 소개 및 긴장을 위한 정착블럭의 해석적 성능 검증에 대한 내용을 수록하였다.

• Journal of Acupuncture Research
• /
• 제18권1호
• /
• pp.14-20
• /
• 2001

Purpose ; Iension-type headache is the most common headache. The effect of acupuncture for headache is already known, but the methods and technique of acupuncture is varied. Choice of acupuncture points is mostly relied on experience. Moreover, objective evaluation of acupuncture effects is lacking. Objective ; The objective of this study is to assess the difference of effects between dry needling on trigger point and dry needling on remote acupuncture point. The patients who were diagnosed as tension-type headache and administrated herb-medication were divided into two groups: Trigger point dry needling group and remote acupuncture point dry needling group, matching in sex, age. The degree of pain was measured by visual analogue scale(VAS) two times, before and after dry needling. Conclusion ; VAS showed significant decrement after dry needling on tension-type headache in both groups, but there was no statistically significant difference between two groups according to sex, age and duration. In addition, it is not statistically approved that there exists the difference of VAS between two groups about the treatment effects.

• Journal of Oral Medicine and Pain
• /
• 제17권2호
• /
• pp.19-25
• /
• 1992

The pressure pain thresholds of head and neck muscles of patients suffering from tensiontype headache220, all female, ages ranged from 13 to 50 years (28.4$\pm$9.6) and 39 healthy controls, all female, ages ranged from 14 to 46 years (24.4$\pm$9.2) were recorded by the electronic algometer (Electyronic Algometer Type I, Somedic, Stockholm, Sweden). And the obtained results were as follows : 1. The pressure pain thresholds of patient group were lower than those of controls in superior sternocleidomastoid muscle, middle sternocleidomastoid muscle, and trapezius insertion muscle (P<0.001) 2. The pressure pain thresholds of patient group were not different from those of controls in anterior temporal, middle temporal, posterior temporal, deep masseter, anterior masseter, inferior masseter, medial pterygoid, posterior digastric, splenius capitus and upper trapezius muscle (P>0.05). 3. Seventy-one percent of tension-type headache patients had more than one muscle, of whicb pressure pain threshold was lowered significantly (less than mean of control - 1.5SD). 4. The pressure pain thresholds of head and neck muscles should be considered as a criterion for the diagnosis of tension-type headache.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.1-4
• /
• 2004

This research surveys the twisting and untwisting tensions according to the various processing conditions of belt type texturing such as draw ratio, 1st heater temperature and velocity ratio. The 1st heater temperature was changed from 1606{\circ}C\; to\; 220^{\circ}C$, draw ratio was changed from 1.6 to 1.9 and velocity ratio was changed from 1.4 to 1.8. The twisting and untwisting tensions are measured with the variation of these processing conditions, in addition, the untwisting tension(T2) and tension ratio(T2/Tl) according to the various processing conditions are analysed with the false twist mechanism which is affected to the physical properties of draw textured yams.

• 사상체질의학회지
• /
• 제25권4호
• /
• pp.384-395
• /
• 2013

Objectives We report a series of 3 chronic tension-type headache cases who were constitutionally typed as the Soeum type, Taeeum type and treated with Dangguibaekhaoguanjung-tang, Chungshimyeonja-tang or Chunghyulganggui-tang. Methods In treating 1 patient who was constitutionally typed as the Soeum type, Case 1 fell into the category of the Taeeum symptomatology, 2 patients who were constitutionally typed as the Taeeum type, Case 2 and Case 3 fell into the category of Dry-Heat symptomatology. Each patient was given Sasang medication according to protocol: Dangguibaekhaoguanjung-tang to Case 1, Chungshimyeonja-tang to Case 2, Chunghyulganggui-tang to Case 3. On admission day and approximately 2 weeks later, patients evaluated their pain and quality of life using SF-36 and HIT-6. The patients symptoms were observed daily and NRS scores were recorded daily. Results and Conclusions 2 Patients(Case1, Case2) showed improvement in their NRS scores, SF-36 scores and HIT-6 scores. 1 patient(Case3) showed improvement in NRS scores, but worse SF-36 scores and no improvement in HIT-6 scores. Treating chronic tension-type headache based on Sasang Constitutional therapy was found to be effective for managing pain. The treatment protocol suggested in this investigation should be explored and verified in future studies.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.27-36
• /
• 1999

To have high flatness quality of hot rolled strip in the hot strip finishing mill train, a new inter-stand tension profile measuring device of segmented looper roll type(coined as Flatness Sensing Inter-stand Looper, FlatSIL) and a new flatness control system have been developed in this study. The device measures the strip tension profile across the strip width and informs the strip wave pattern to new flatness control system where work roll bending mode to relieve the strip wave is determined. The existing automatic shape control system which uses laser type shape-meter installed at the outlet of the last finishing mill stand strip tension between down coiler and last finishig mill since the latent wave concealed by the strip tension between down coiler and last finishing mill stand cannot be measured by the laser distance-meter. Thus the existing shape control system is not able to control the flatness through the full strip length. The new flatness control system, however, works for full strip length during strip rolling as far as the tension profile measuring device and work roll bender are on. With the new flatness control system, work roll bender is automatically controller to minimize the latent wave of the running strip and the flatness quality as well as strip travelling stability has been noticeably improved from strip head through body to tail.

• 근관절건강학회지
• /
• 제29권1호
• /
• pp.11-17
• /
• 2022

Purpose: This study aimed to provide objective and basic data for an effective treatment method by examining changes in the mechanical properties of muscles and the degree of tenderness when a combination of stretching exercise and ultrasound therapy is applied to patients with tension headaches. Methods: The participants were classified into two groups based on the intervention received: the therapeutic ultrasound combined with suboccipital stretching (n=15, experimental group) and infrared combined with suboccipital stretching (n=15, control group) groups. The intragroup differences in mechanical muscle properties and modified total tenderness score were compared and analyzed. Results: The comparison and analyses of the changes in muscle tone and stiffness revealed statistically significant intragroup decreases in the upper trapezius and suboccipitalis in the experimental group. Similarly, the comparison and analyses of the changes in muscle stiffness revealed statistically significant intragroup decreases in the upper trapezius in the control group. Conclusion: Therapeutic ultrasound combined with suboccipitalis stretching effectively increased the flexibility of the muscles around the cervical vertebrae and reduced muscle tension and stiffness in tension-type headache patients

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.261-264
• /
• 2001