• Clinics in Shoulder and Elbow
• /
• 제20권1호
• /
• pp.49-56
• /
• 2017

Since the olecranon fractures are caused by relatively low-energy injuries, such as a fall from standing height, they are usually found without comminution. Less commonly they can be developed by high-energy injuries and have severe concomitant comminution or injuries to surrounding structures of the elbow. Because the fracture by nature is intra-articular with the exception of some avulsion-type fracture, a majority of olecranon fractures are usually indicated for surgical treatment. Even if there is minimal displacement, surgical treatment is recommended because there is a possibility of further displacement by the traction force of triceps tendon. The most common type of olecranon fracture is displaced, simple non-comminuted fracture (that is, Mayo type IIA fractures). Although tension band wiring was the most widespread treatment method for these fractures previously, there is some trends toward fixation using locking plates. Primary goal of the surgery is to restore a congruent joint and extensor mechanisms by accurate reduction and stable fixation so that range of motion exercises can be performed. The literature has shown that good clinical outcomes are achieved irrespective of surgical fixation technique. However, since the soft tissue envelope around the elbow is poor and the implants are located at the subcutaneous layer, implant irritation is still the most common complication associated with surgical treatment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.1-4
• /
• 2005

This study is to examine adhesion the characteristics of self adhesive asphalt to minimize of the construction periods and the environmental problems through the performance estimation of materials to reduce waterproof problem and the long durability maintenance of building structures. This study tested the estimation items of self rubberized adhesive asphalt to examine the sheet discovered the most important problem in the construction site and the connection stability in the sheet joint. Besides, this study examined the material characteristics such as tension property, tear property, temperature dependence, heat resistance, adhesion stability and so on. Test results of the separative items satisfied in the reference figure of connection stability and adhesion stability which could confirm adhesion performances and other items also satisfied in the reference.

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.14-23
• /
• 1996

The corrosion fatigue test were carried out to evaluate the fatigue characteristics of accelerated cooled (ACC) TMCP high tensile strength steels and weld joint with high heat input by one side one run submerged are welding. In this paper, the fatigue crack growth behaviors were investigated with the center crack tension specimen of base metal and heat affected zone in substitute sea water and air, respectively Main results obtained are sunnarized as follows: 1. The fatigue crack growth rates in sea water faster than those in air environment for the different heat input values, crack growth rate of base metal is very fast and effect of heat input is not remarkable. 2. In HAZ (82kJ/cm, 116kJ/cm), the crack branching phenomena were observed in both air and sea water environment, 3. In SEM observation, the corrosion effect on base metal was larger than that on HAZ in corrosion environment.

• 한국산업융합학회 논문집
• /
• 제9권3호
• /
• pp.215-220
• /
• 2006

Recently, steel-concrete composite slab decks have been widely used as highway bridge decks. In the construction of the composite slab decks, it is necessary to join two adjacent blocked bottom plates to form one unite in the longitudinal direction. In this paper, several types of longitudinal direction joints for Robinson type composite slab decks ared proposed herein and static bending test are carried out by using slab specimens. And the stress and deformation of the tensile grip connection with high strength bolts are discussed by using three-dimensional elastic-plastic FEM.

• 대한정형도수물리치료학회지
• /
• 제13권1호
• /
• pp.58-66
• /
• 2007

The purpose of this study is to understand the structure and biomechanics of the skeletal muscle. The skeletal muscle takes 40 to 45% of the whole body. Stable posture requires a balance of muscle. However, when the muscle strength is unbalanced, movement initiates. The power generated by the muscle is a primary means to adjust the equilibrium of posture and movement. The structural unit of the skeletal muscle is a long cylindrical type muscle fiber which contains hundreds of nucleus. The thickness of muscle fiber is about $10-100{\mu}m$, and its length is about 1-50cm. Muscle fiber is composed of myofibril that is covered with plasma membrane which is called sarcolemma. In understanding the movement of human body, it is important to comprehend the movement of bone and joint and the tension of muscle. Understanding the structure and biomechanics of muscle also provides basic information on clinical treatment of patients.

• 천문학회보
• /
• 제46권1호
• /
• pp.47.3-47.3
• /
• 2021

In this talk I will review recent progress that the SDSS-IV / eBOSS collaboration has made in constraining cosmology from the clustering of galaxies, quasars and the Lyman-alpha forest. The SDSS-IV / eBOSS collaboration has measured the baryon acoustic oscillation (BAO) and redshift space distortion (RSD) features in the correlation function in redshift bins from z~0.15 to z~2.33. These features constitute measurements of angular diameter distances, Hubble distances, and growth rate measurements. A number of consistency tests have been performed between the BAO and RSD datasets and additional cosmological datasets such as the Planck cosmic microwave background constraints, the Pantheon Type Ia supernova compilation, and the weak lensing results from the Dark Energy Survey. Taken together, these joint constraints all point to a broad consistency with the standard model of cosmology LCDM + GR, though they remain in tension with local measurements of the Hubble parameter.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.527-535
• /
• 2015

As a new technical approach, a hydraulic and magnetic clamp device was attempted to realize a magnetic clamp crane system that uses 8 simultaneously actuating individual hydraulic cylinders. Through this approach, a Sr type of ferritic permanent magnet ($SrO{\cdot}6Fe_2O_3$), not the previously employed electro-magnet, was utilized for the purpose of lifting and transporting the heavy weighted and oversized curved steel plates used for manufacturing the ships. This study is aimed at manufacturing and developing the hydraulic magnetic clamp prototype, which is composed of three main parts - the base frame, cylinder joint, and magnet joint - in order to safely transport such curved steel plates. Furthermore, this research was pursued to conduct a performance evaluation as to the prototype manufacture and acquire the planned quantity value and the development purpose items. The most significant item for a performance evaluation was estimated for the magnetic adhesive force (G) and in this process, a ferritic permanent magnet (Sr type) with 3700~4000 G of residual induction (Br) and 2640/2770 Oe of coercive force (Hc) was utilized. In addition, other relevant items such as hoist tension (kN), transportation time (sec), and the applied load (Kgf) exerted on the hydraulic cylinders were also evaluated in order to acquire the optimum quantity value. As a result of the evaluation, the relevant device turned out to be suitable for safely transporting the curved steel plates.

• 한국해양공학회지
• /
• 제29권4호
• /
• pp.322-330
• /
• 2015

As a new technical approach, a hydraulic and magnetic clamp device was developed to realize a magnetic clamp crane system by simultaneously actuating eight individual hydraulic cylinders. In this approach, an Sr-type of ferritic permanent magnet (SrO· 6Fe₂O₃), rather than the previous electromagnet, was utilized for the purpose of lifting and transporting the large curved steel plates used for manufacturing ships. This study had the goal of developing and manufacturing a hydraulic, magnetic clamp prototype composed of three main parts, including the base frame, cylinder joint, and magnet joint, in order to safely transport curved steel plates. Furthermore, this research included a performance evaluation of the manufactured prototype and acquired the purposed quantity value in the performance test. The most significant item, the magnetic adhesive force (G), was evaluated in a performance test, which utilized a ferritic permanent magnet (Sr type) with 3700~4000 G of residual induction (Br) and 2640/2770 Oe of coercive force (Hc). In particular, relevant items such as the hoist tension (kN), transportation time (s), and applied load (Kgf) on the hydraulic cylinders were also evaluated in order to determine the optimum values.

• 한국임상수의학회지
• /
• 제29권6호
• /
• pp.502-505
• /
• 2012

8개월령, 3.5 kg의 중성화하지 않은 토이 푸들이 왼쪽 다리의 체중 부중을 하지 않는 파행으로 내원하였다. 방사선 검사에서, 왼쪽 경골 근위부의 Salter-Harris II 형 성장판 골절과 비골 골절이 발견되었다. 교차핀, 긴장철사와 경첩 관절경유 외고정을 통해 근위 경골의 성장판 골절을 정복 하였다. 수술 후 1주째까지 경첩관절경유 외고정의 관절가동변위를 $25^{\circ}$, 수술 후 2주째까지 $70^{\circ}$ 까지 증가 시켰으며 수술 후 3주째 경첩 관절경유 외고정을 제거하였다. 수술 후 6주차에 골절은 합병증 없이 성공적으로 치유되었고 환자는 정상보행을 회복하였다. 수술 후 7개월째 환자는 정상적으로 보행을 하였으며, 반대쪽 정상다리와 비교하였을 때 관절의 가동범위는 동일 하였다. 본 증례는 근위 경골의 성장판 골절이 있는 미성숙견에서 교차핀, 긴장철사 및 경첩 관절경유 외고정을 이용하여 성공적으로 치료한 사례이다. 이러한 방법은 수술 후 골절정복의 안정성 및 조기 관절운동을 통한 정상 관절범위의 회복에 유용하게 사용 될 수 있을 거라 사료된다.

• Clinics in Shoulder and Elbow
• /
• 제12권2호
• /
• pp.159-166
• /
• 2009

목적: 압박 긴장대 방법을 이용한 작은 구상 돌기 골절의 견고한 고정과 주관절의 조기 운동을 통한 기능의 향상 및 그 결과를 분석하고자 한다. 재료 및 방법: 주관절 내측접근법으로 K-강선과 철선을 이용하여 고정된 8예의 구상돌기 골절을 대상으로 하였다. 분류상 8예 모두 Regan-Morrey type 2였으며 O'Driscoll 분류12)로는 tip형(subtype 2)가 예, anteromedial 형 (subtype 2, 1예 그리고 subtype 3, 2예)3예였다. 동반 손상으로는 측부인대 파열이 6예, 요골두 및 경부골절이 4예였으며 모두 함께 치료하였다. 술 후 5~7일간의 고정 치료 후 경첩 보조기 (hinge brace)을 착용한 상태에서 술후 6주까지 능동적 운동을 허용하였다. 술 후 통증의 여부, 관절 운동 범위, Mayo elbow performance score(MEPS)을 이용한 기능적 평가 방법을 이용하여 치료 결과를 분석하였다. 평균 11 (6~28)개월 추시 하였으며 척골 신경 증상에 대해서도 함께 조사하였다. 결과: 모든 구상돌기 골절은 내고정용 도구의 실패 없이 모두 유합되었다. 평균 2.2 (2~4)개의 K-강선이 사용되었다. 관절운동 범위에 대해 신전은 평균 $3^{\circ}(0^{\circ}\sim25^{\circ})$, 굴곡는 평균 $137^{\circ}(130^{\circ}\sim140^{\circ})$, 회내전은 평균 $69^{\circ}(45^{\circ}\sim90^{\circ})$, 회외전은 $78^{\circ}(45^{\circ}\sim90^{\circ})$이였다. MEPS는 평균 96 (65~100) 이였다. 척골 신경 증상은 terrible triad 1예에서 첫 수술 (index operation)후 요골두를 절제하고 내측 측부 인대의 기능 부전이 있는 1예에서 관찰되었다. 결론: 쉽게 구할 수 있으며 가격이 저렴한 K-강선과 철선을 이용한 압박 긴장대 방법은 충분히 견고하여 조기에 능동적 운동을 허용할 수 있어 주관절의 기능 향상을 가져올 수 있었다. 이 방법은 특히 다발성 소형 구상 돌기 골절의 경우 유용한 하나의 고정 방법으로 생각된다.