A Study on Corrosion Fatigue Properties of Welded Joints for TMCP High Strength Steels

TMCP 고장력강 용접부의 부식도영 특성에 관한 연구

  • 이택순 (영남대학교, 기계공학과) ;
  • 이휘원 (영남대학교, 기계공학과) ;
  • 김영철 (영남대학교, 기계공학과)
  • Published : 1996.08.01


The corrosion fatigue test were carried out to evaluate the fatigue characteristics of accelerated cooled (ACC) TMCP high tensile strength steels and weld joint with high heat input by one side one run submerged are welding. In this paper, the fatigue crack growth behaviors were investigated with the center crack tension specimen of base metal and heat affected zone in substitute sea water and air, respectively Main results obtained are sunnarized as follows: 1. The fatigue crack growth rates in sea water faster than those in air environment for the different heat input values, crack growth rate of base metal is very fast and effect of heat input is not remarkable. 2. In HAZ (82kJ/cm, 116kJ/cm), the crack branching phenomena were observed in both air and sea water environment, 3. In SEM observation, the corrosion effect on base metal was larger than that on HAZ in corrosion environment.



  1. ASTM STP 642 Corrosion-Fatigue Technology H.L.Craig;T.W.Crooker;D.W.Hoeppner
  2. 韓國腐蝕學會志 v.12 no.4 3Ni-Cr-Mo계 高靭性 高長力鋼의 腐蝕疲榮 龜裂傳播거動硏究 류호림;김규영
  3. iron steel Inst. Corrosion Fatigue Crack Growth Characteristics of 50㎏/㎟ TMCP Steel in Synthetic Sea Water K.Komai;K.Minoshima
  4. ASTM E 647-88 Standard Test Method for Measurement of Fatigue Crack Growth Rate
  5. ASTM D1141-75 Standard Test Method for Water Absorption of Plastics
  6. Fracture of Structural Materials Tetelman,A.J.;McEvily,Jr.
  7. 韓國海洋工學會誌 v.1 no.2 高長力鋼 鎔接部의 海水중 腐蝕疲榮龜裂 成長特性에 관한 硏究 金永植;朴武昌
  8. 日本機械學會論文集(A編) v.55 no.510 Fatigue Crack Characteristics of Four 50㎏/㎟ TMCP Steels and Their Weld-Heat-Affected-Zone in Synthetic Sea Water at a frequency of 0.17㎐ M.Kanama;O.Akio
  9. 韓國海洋工學會誌 v.7 no.2 TMCP鋼의 腐蝕疲榮 擧動에 미치는 鹽分의 影響에 관한 硏究 이상호;한정섭
  10. 大韓鎔接學會志 v.6 no.2 海水環境에서 鋼 容接部의 環境强度評價에 관한 연구 (Ⅰ) 정세희;김태영;나의균