• 설비공학논문집
• /
• 제7권2호
• /
• pp.298-309
• /
• 1995

Low-fin tubes are widely used to enhance condensation heat transfer. In this study, condensation heat transfer experiment was conducted on the low-fin tube using R-11. Three different fin densities-787 fpm (fins per meter), 1102 fpm. 1378 fpm-were tested. The results show that low-fin tube enhances the condensation heat transfer considerablely. The enhancement increases as the fin density increases. It was also found that the fin shape and height have a significant effect on the condensation heat transfer coefficient. Slender or high fins showed a higher condensing heat transfer coefficient compared with fat, low fins. For the tube with 1378 fpm, however, excessive fin height decreased the condensing heat transfer coefficient. The reason may be attributed to the increasing condensate retention angle as the fin density increases. The experimental data are compared with existing prediction models. Results show that Webb's surface tension model predicted the data best (within ${\pm}20%$), which confirms that surface tension plays the major role in low-fin tube condensation.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.113-115
• /
• 2003

Droplet impinging into a cavity at micro-scale is one of important fluidic issues for microfabrications, e.g. bio-chip applications and inkjet deposition processes in the PLED panel manufacturing. The droplets generally dispensing from an inkjet head, which contains an array of nozzles, have a volume in several picoliters, while each nozzle jets the droplets into cavities with micron-meter size located on substrates. Due to measurement difficulties at micro-scale, the numerical simulation could serve as an efficient and preliminary way to evaluate the micro-sized droplet impinging behavior into a cavity. The micro-fluidic flow is computed by solving the three-dimensional Navier-Stokes equations through a finite volume discretization. The droplet front is predicted by a volume-of-fluid approach, in which the surface tension is modeled as a function of the fluid concentration. This paper discusses the influence of fluid properties, such as surface tension and fluid viscosity, on micro-fluidic characteristics at different jetting speeds in the deposition process via the proposed numerical approach.

• 수산해양기술연구
• /
• 제26권2호
• /
• pp.111-117
• /
• 1990

스프링강으로 만든 3가지 크기의 타원형후크에 대하여 만능시험기로 특성시험을 하고, 나팔관을 사용한 통발 자동분리기로 모릿줄의 고달이에 연결된 타원형후크에서 장어통발이 분리되도록 하는 실험을 육상과 해상에서 각각 시행한 경과는 다음과 같다. 1. 직경 3.1mm인 대형의 타원형후크에서 줄의 이탈장력은 60kg 정도이고, 줄을 끼워넣기 위한 손누름 압축력은 6kg 정도이며, 나팔관을 통과장력은 11~15kg 정도였다. 2. 현측 로울러의 앞쪽이나 뒤쪽에 나팔관을 부착한 자동분리기를 사용하여 대형후크에서 통발이 자동으로 분리되도록 하는 육상실험의 결과 양승속도 2~4m/sec에서 분리율은 99%정도였다. 3. 현측 로울러의 후방 2m 정도 되는 곳에 나팔관을 설치하고 대형후크로 해상 시험조업을 한 결과 양승속도 3~4m/sec에서 통발의 분리율은 97%정도였다.

• 한국수산과학회지
• /
• 제17권1호
• /
• pp.1-8
• /
• 1984

어구의 전저항에서 전개판과 끌줄의 항력을 뺀 나머지를 트로올 그물의 유체저항이라 보고, 그물의 유체저항과 연계상의 요소 및 예망속도와의 관계를 R_N=k\frac{d}{l}abv^n 라고 표현할때, 새바다호에서 사용하고 있는 각종 그물에 대한 k와 n의 값을 구한 결과는 다음과 같다. 1. 6폭짜리 그물에 2가닥의 그물목줄을 쓰는 형(A형)과 8폭짜리 그물에 3가닥의 그물목줄을 쓰는 형(B형)은 예망속도가 1.8m/sec 이상일때 k는 11, n는 1.8이었다. 2. 10폭짜리 그물에 3가닥의 그물목줄을 쓰는 형(C형)은 예망속도가 1.8m/sec이하일 때는 k는 12, n는 1.3이며, 예망속도가 1.8m,/sec 이상일 때 k는9, n는 1.9이였다. 3. 10폭짜리 그물에 4가닥의 그물목줄을 쓰는 형(D형)은 예망속도가 1.8m/sec 이하일 때는 k는 16, n는 1.0이고, 예망속도가 1.8m/sec 이상일 때는 k는9, n는 1.9이었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.175.2-175
• /
• 2001

The strip profile and shape control is one of the most important technologies in Hot Rolling Mill System. Because the unbalance of strip´s shape and wave appearance between stands has a bad effect on Hot Rolling Mill System by making the inferior thickness, strip´s damage and so forth in factories. Many competition Plate Mill introduced shape control system, for example, pair cross-mill, work roll bender, which includes shape measuring instruments and shape control mathematical models. Shape meter, which is equipped for flatness, only does feedback control at the top of coil. And, for crown, we depend on initial setup value and there is no feedback control. Therefore we predict the shape of strip using rolling pressure, bender force and tension of inter-stand in ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.150.1-150
• /
• 2001

This paper introduces a real time inspecting and monitoring system by using wireless communication and image processing technique. The communication system is developed by using 80c196kc microprocessor and it has data acquisition function for several kinds of sensors such as pluviometer, temperature, tension meter, elinometer and so on. The image processing method adopts Lalacian of Gaussian operator and least square method to extract line features for the captured images and uses a relaxation matching algorithm based in global structure constraint satisfaction to distinguish the matching error for those features. When the algorithm is processed, motion parameters of displacement area and its direction are computed. Once movement is recognized ...

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.350-362
• /
• 2011

The principal objective of this study was to develop a scanning technique that helps patients reduce their anxiety and relax their physical tension in the MRI system. The study targeted 10 healthy persons with no medical history of anxiety disorder in the past and with no current clinically diagnosed anxiety disorder, as well as 10 patients who were currently experiencing an anxiety disorder during the MRI scanning. The focusing board assembly was self-manufactured to conduct a clinical experiment via MRI scans. As a method to confirm the efficacy of the experiment, the bio meter was used to measure brainwaves from the study targets that were divided into the normal person group (A), who felt no anxiety in the MRI system and the experimental group, (B) who did experience anxiety in the MRI system. The two groups were compared between the cases in which the focusing board assembly was used and not used after measurements were conducted using the model MRI system and the bio meter. According to the comparison and analysis results, low measurements of the ${\alpha}$ wave indicate highly effective relaxation of tension. In the normal person group, the ${\alpha}$ wave measurement showed almost no difference between cases in which the focusing board assembly was used and cases in which it was not used. In the experimental group, the $\acute{a}$ wave measurements were lower in cases in which the focusing board assembly was used than in cases in which the focusing board assembly was not used; this was indicative of a profound relaxation effect.

• 수산해양기술연구
• /
• 제36권1호
• /
• pp.60-65
• /
• 2000

수중에서 운동하는 그물어구의 가상질량은 어구의 운동을 해석하고 제어하는데 중요한 파라미터이다. 본 연구에서는 트롤어구의 가상질량을 추정하기 위해서 현재 트롤 어구에서 사용되고 있는 여러 종류의 그물감을 이용해서 자루그물을 제작하여 속도제어가 가능한 회류수조를 이용하여 가상 질량이 망지의 규격 및 망사의 부피 등과 어떤 관계가 있는지를 분석하였고, 실제어구의 가상질량 계산에 적용하여 보았다. 본 연구에서 얻어진 결과를 요약하면 다음과 같다. 1. 재료의 양은 같이 하고 순수하게 영각만을 달리한 각 그물에 대해 영각이 클수록 저항이 더 크게 나타났다. 2. 저항계수 (C 하(d))는 레이놀즈수(Re)에 따라 점점 감소하는 경향을 보이며, 식으로 나타내면 다음과 같았다. C 하(d)=0.039Re 상(-0.1474) 3. 망지의 표면적(TSA, Twine Surface Area)이 클수록 저항 값이 크게 나타났으며 식으로 나타내면 다음과 같다. R=21.398TSA 상(-0.4219) 4. 질량계수(C 하(M))는 유속(U)이 증가함에 따라 증가하는 경향을 나타내며 실험식은 다음과 같다. C 하(M)=37.557U-8.9684 5. 가상질량은 망사의 체적(V)과 d/l에 각각 비례관계를 나타냈다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권4호
• /
• pp.330-343
• /
• 2016

This paper presents results of an experimental investigation of vortex-induced vibration (VIV) of a flexibly mounted and rigid cylinder with two-degrees-of-freedom with respect to varying ratio of in-line natural frequency to cross-flow natural frequency, $f^*$, at a fixed low mass ratio. Combined in-line and cross-flow motion was observed in a sub-critical Reynolds number range. Three-dimensional displacement meter and tension meter were used to measure dynamic responses of the model. To validate the results and the experiment system, x and y response amplitudes and ratio of oscillation frequency to cross-flow natural frequency were compared with other experimental results. It has been found that the higher harmonics, such as third and more vibration components, can occur on a certain part of steel catenary riser under a condition of dual resonance mode. In the present work, however, due to the limitation of a size of circulating water channel, the whole test of a whole configuration of the riser at an adequate scale for VIV phenomenon was not able to be conducted. Instead, we have modeled a rigid cylinder and assumed that the cylinder is a part of steel catenary riser where the higher harmonic motions could occur. Through the experiment, we have found that even though the cylinder was assumed to be rigid, the occurrence of the higher harmonic motions was observed in a small reduced velocity ($V_r$) range, where the influence of the in-line response is relatively large. The transition of the vortex shedding mode from one to another was examined by using time history of x and y directional displacement over all experimental cases. We also observed the influence of in-line restoring force power spectral density with $f^*$.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.497-501
• /
• 2015

Inkjet printing is a widespread technology, offering advantages such as high-quality decoration, a continuous process, and the accurate direct reproduction of patterns or pictures. In inkjet printing technology, the dispersion stability of ceramic ink is one of the most important factors. In this study, the dispersion stability of blue $CoAl_2O_4$ ink for ceramic inkjet printing is systematically investigated. Blue $CoAl_2O_4$ pigment was synthesized by a solid-state reaction and then milled to less than 300nm in size. In order to investigate the influence of the viscosity on the dispersion stability, two types of $CoAl_2O_4$ ceramic inks (termed here Blue L and Blue H) were prepared using different volume ratios of ethylene glycol and ethanol. The Blue L and Blue H ink solutions contained cetyltrimethylammonium bromide(CTAB) as a dispersive agent. The viscosity, surface tension and jetting stability of the $CoAl_2O_4$ ceramic inks were analyzed using a rheometer, a surface tension meter and a dropwatcher. The dispersion stability of the $CoAl_2O_4$ ceramic ink was investigated by a multiple light-scattering method. Blue H, a ceramic ink with higher viscosity, showed much better dispersion stability than the Blue L ceramic ink.