• 대한기계학회논문집B
• /
• 제38권1호
• /
• pp.9-16
• /
• 2014

본 논문은 경사진 원형관에서 표면장력과 중력으로 구동되는 비뉴턴 유체(멱법칙 모델)의 유동 및 변위를 이론적으로 연구한 것이다. 그리고 표면장력에 의하여 연속적으로 원형관 내로 유입되는 비뉴턴 유체의 변위를 기술하기 위한 지배방정식을 처음으로 개발하였다. 뉴턴의 운동방정식으로부터 유도된 식은 2계 비선형이며 비제차인 형태의 상미분 방정식이다. 지배방정식의 해를 수평관에서 변위를 시간의 함수로 기술한 식 및 실험과 비교한 결과 정량적으로 동일한 일치를 보였다. 여기에 더하여 정상상태인 힘의 균형식의 결과에 대해서도 정확한 일치로 나타남을 확인할 수 있었다.

• Steel and Composite Structures
• /
• 제12권5호
• /
• pp.427-444
• /
• 2012

This paper presented a new aerial platform-AERORail for rail transport and its structure evolution based on the elastic stiffness of cable; through the analysis on the cable properties when the cable supported a small service load with high-tensile force, summarized the theoretical basis of the AERORail structure and the corresponding simplified analysis model. There were 60 groups of experiments for a single naked cable model under different tensile forces and different services loads, and 48 groups of experiments for the cable with rail combined structure model. The experimental results of deflection characteristics were compared with the theoretical values for these two types of structures under the same conditions. It proved that the results almost met the classical cable theory. The reason is that a small deflection was required when this structure was applied. After the tension increments tests with moving load, it is verified that the relationships between the structure stiffness and tension force and service load are simple. Before further research and applications are made, these results are necessary for the determination of the reasonable and economic tensile force, allowable service load for the special span length for this new platform.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.186-196
• /
• 2008

The dependence of the rheological properties of blood on shape, aggregation, and deformability of red blood cells (RBCs) has been investigated using hybrid systems by coupling fluid with solid models. We present a simple approach for simulating blood as a multi-component fluid, in which RBCs are modeled as droplets of acquired biconcave shape. We used lattice Boltzmann method (LBM) due to its excellent numerical stability as a simulation tool. The model enables us to control the droplet static shape by imposing non-isotropic surface tension force on the interface between the two components. The use of the proposed non-isotropic surface tension method is justified by the Norris hypothesis. This hypothesis states that the shape of the RBC is due to a non-uniform interfacial surface tension force acting on the RBC periphery. This force is caused by the unbalanced distribution of the lipid molecules on the surface of the RBC. We also used the same concept to investigate the dynamic shape change of the RBC while flowing through the microvasculature, and to explore the physics of the Fahraeus, and the Fahraeus-Lindqvist effects.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.186-196
• /
• 2008

The dependence of the rheological properties of blood on shape, aggregation, and deformability of red blood cells (RBCs) has been investigated using hybrid systems by coupling fluid with solid models. We present a simple approach for simulating blood as a multi-component fluid, in which RBCs are modeled as droplets of acquired biconcave shape. We used lattice Boltzmann method (LBM) due to its excellent numerical stability as a simulation tool. The model enables us to control the droplet static shape by imposing non-isotropic surface tension force on the interface between the two components. The use of the proposed non-isotropic surface tension method is justified by the Norris hypothesis. This hypothesis states that the shape of the RBC is due to a non-uniform interfacial surface tension force acting on the RBC periphery. This force is caused by the unbalanced distribution of the lipid molecules on the surface of the RBC. We also used the same concept to investigate the dynamic shape change of the RBC while flowing through the microvasculature, and to explore the physics of the Fahraeus, and the Fahraeus-Lindqvist effects.

• 대한치과교정학회지
• /
• 제11권1호
• /
• pp.17-23
• /
• 1981

This experiment was performed to investigate the response of inorganic substances in alveolar bone in relation to the experimental tooth movement. Right canine in maxillary jaw was tipped in cats by coil springs generating 80 gm. force, in mandibular jaw, the force was 100 gm. force. Cats were divided into five groups and orthodontically treated for one hour, 1, 7, 14 and 28 days, respectively. Alveolar bone samples were obtained from tension and compression sites as well as from contralateral control sites. The level of calcium of alveolar bone was determined by atomic absorption spectrophotometry and inorganic phosphorus was measured by spectrophotometry. The results obtained were as follows: 1. In tension and compression site of maxillary alveolar bone, calcium levels were decreased at 1, 7 and 14 days, but recovered at 28 days. 2. The levels of inorganic phosphorus in compression site of maxillary alveolar bone had little change but in tension site of maxillary alveolar bone , phosphorous levels were decreased, 3. Calcium levels in tension and compression site of mandibular alveolar bone were decreased, especially at 28 days. 4. In tension and compression site of mandibular alveolar bone, inorganic phosphorus were slightly decreased from 1 day.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.137-140
• /
• 1996

This study investigated the length-tension and velocity-force relations of the torso erectors. A myoelectric based approach was used wherein a dynamic biomechanical model incorporating active and passive tissue charactreistics provided music kinematic estimates during controlled sagittal plan extension motions. A double linear optimization formulation from the literatured provided muscle tension estimates. The data supported a linear length-tension relation toward full flexion for both the erector spinae and latissimus muscles. Velocity trends agreed with that predicted by Hill's exponential relation. The results have implications for muscle tension estimation in biomechanical torso modeling, and suggest a possible low back pain injury mechanism.

• 비파괴검사학회지
• /
• 제15권2호
• /
• pp.371-377
• /
• 1995

각종 산업 분야에서 사용되는 고장력 볼트는 피결함체의 진동이나 충격 하중 및 반복 하중에 의해서 체결력이 약해지는 현상이 발생하는 문제점이 대두되고 있다. 그러므로, 고장력 볼트의 체결력 관리라는 관점에서, 초음파의 음탄성 효과를 이용하여 화력발전소용 터어빈의 고장력 볼트(12Cr.V.Ta)를 모델링한 시험체 내에 입사된 초음파 빔의 공진 주파수 또는 전파 시간을 측정하기 위하여 고장력 볼트의 데이타 값 및 체결 축력 계산식이 입력된 IBM PC를 연결하고, 인장시험기로 하중을 1 ton 씩 증가시키면서 고장력 볼트의 체결축력 및 겉보기 신장량을 구하였으며, 이를 통하여, 고장력 볼트의 설비 안전 검사 시스템의 구축이 가능하였다.

• 한국강구조학회 논문집
• /
• 제23권6호
• /
• pp.715-724
• /
• 2011

인장구조 시스템에서 구조물의 하중을 지지하는 인장재 사이에 삽입되어 인장력을 조절하는 장치가 턴버클이다. 인장재가 인장구조에서 중요한 부재임에도 불구하고, 현재 인장재에 발생하는 인장력을 경제적이고 간단하게 측정하기 위한 방법이 제안되지 못하였다. 그리하여 인장구조시스템에 작용하는 인장력을 측정하기 위하여 인장력 측정장치를 개발하였다. 본 논문에서는 이론해석과 유한요소해석을 바탕으로 100kN, 200kN, 300kN급 측정한계하중을 가지는 턴버클을 실험하였다. 그 결과 이론적 해석, 유한요소해석, 실험결과는 대체로 일치하는 것으로 나타났다. 또한 유한요소해석에 의한 측정용 턴버클의 극한강도를 조사해보면, 측정한계하중의 5배 이상의 과하중에서도 충분한 안전성을 확보하고 있음을 확인할 수 있었다.

• 대한약리학회지
• /
• 제15권1_2호
• /
• pp.29-37
• /
• 1979

Cd 중독(中毒)으로 가토(家兎)에 고혈압(高血壓)을 일으키고 이를 중독(中毒) 가토(家兎)와 대조(對照) 비중독(非中毒) 가토(家兎)의 간문맥(肝門脈), 흉부(胸部) 대정맥(大動脈) 및 폐정맥(肺動脈)을 적출하여 in vitro에서 장력(張力)-길이의 관계를 관찰하고 NE, $K^+$-depolariration 및 angiotensin의 수축(收縮) 효과(效果)를 비교(比較)하였다. 1. 비중독(非中毒) 대조군의 평균 동맥압은 $87.0{\pm}4.7mmHg$이었고 Cd 중독군(中毒群)에서는 $109.0{\pm}2.8mmHg$로 Cd 중독(中毒)에 의하여 의의(意義)있는 증가(增加)를 나타내었다. 2. 동(動) 정맥(靜脈)의 장력(張力)-길이 곡선(曲線)에서 Cd 중독(中毒) 가토의 간문맥(肝門脈)은 passive tension의 증가에 따라 distensibility가 현저히 증가되나 대동맥(大動脈)에 있어서는 오히려 대조군에 비(比)하여 유의(有意)한 감소(減少)를 나타내었고 폐동맥(肺動脈)은 아무런 차이(差異)를 나타내지 아니하였다. 3. Passive tension의 증가에 따른 active tension의 변화(變化)는 대동맥(大動脈)에 있어서는 Cd중독으로 현저히 감약되었으나 간문맥(肝門脈)이나 폐동맥(肺動脈)은 대조군과 별다른 차이(差異)가 없었다. 4. Cd 중독군(中毒群)이나 비중독(非中毒) 대조군에서 passive tension의 변동에 따른 수축결과(收縮效果)는 세 혈관에서 모두 유의(有意)한 차이를 나타내지 아니하였다. 5. 대동맥(大動脈) 절편에 대한 angiotensin의 수축(收縮) 효과(效果)는 Cd 중독군(中毒群)에서 유의하게 저하되었다.

• Structural Engineering and Mechanics
• /
• 제67권6호
• /
• pp.555-563
• /
• 2018

Architectural fabrics membranes have not only the structural performance but also act as an efficient cladding to cover large areas. Because of the direct relationship between form and force distribution in tension membrane structures, form-finding procedure is an important issue. Ideally, once the optimal form is found, a uniform pre-stressing is applied to the fabric which takes the form of a minimal surface. The force density method is one of the most efficient computational form-finding techniques to solve the initial equilibrium equations. In this method, the force density ratios of the borders to the membrane is the main parameter for shape-finding. In fact, the shape is evolved and improved with the help of the stress state that is combined with the desired boundary conditions. This paper is evaluated the optimum amount of this ratio considering the curvature of the flexible boarders for structural configurations, i.e., hypar and conic membranes. Results of this study can be used (in the absence of the guidelines) for the fast and optimal design of fabric structures.