• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.932-939
• /
• 2011

This paper deal with technique of tension length calculation for 350km/h high speed catenary system. Tension length affects in facility investment. Possibility of overlap increasing a tension length and the equipment investor decreases in order to decrease. Considers the parameter which specifies and the grudge which is possible long the fact that decides a tension length is the aim which is important plans overhead contact line. The element which decides a tension length with next following; (i) Operating range of tension device, (ii) Change of the horizontal tension which affects possibility of the effect which operates to the line and span, (iii) Tension of wire material the tensile force which is relation, (iv) Wire thermal expantion which relates with a standard temperature, (v) Curve radius, (vi) Wind velocity, (vii) Thermal range of overhead contact wire and mechanical design of tension mechanism etc.

• Structural Engineering and Mechanics
• /
• 제68권4호
• /
• pp.399-408
• /
• 2018

Cable supported structures have been widely used in civil engineering. Cable tension estimation has great importance in cable supported structures' analysis, ranging from design to construction and from inspection to maintenance. Even though the Bernoulli-Euler beam element is commonly used in the traditional finite element method for calculation of frequency and cable tension estimation, many elements must be meshed to achieve accurate results, leading to expensive computation. To improve the accuracy and efficiency, a dynamic finite element method for estimation of cable tension is proposed. In this method, following the dynamic stiffness matrix method, frequency-dependent shape functions are adopted to derive the stiffness and mass matrices of an exact beam element that can be used for natural frequency calculation and cable tension estimation. An iterative algorithm is used for the exact beam element to determine both the exact natural frequencies and the cable tension. Illustrative examples show that, compared with the cable tension estimation method using the conventional beam element, the proposed method has a distinct advantage regarding the accuracy and the computational time.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.256-260
• /
• 2002

This report summarizes the results of global performance analysis of TLP(Tension Leg Platform) at in-place operation condition. The frequency and time domain analysis were performed to calculate the wave induced dynamic responses of TLP using the commercial 3-D diffraction program, MOSES. As results of the analysis, air-gap, excursion and tension on the tendons&risers were provided. For verifying, the existed numerical and experimental result were compared with the results of the present study.

• 콘크리트학회논문집
• /
• 제24권1호
• /
• pp.15-23
• /
• 2012

이 논문은 철근콘크리트 구조부재의 사용성능 검증을 위한 균열폭과 처짐을 산정할 수 있는 새로운 계산 방법을 제안하고 이를 자동으로 계산할 수 있는 프로그램을 개발한 것이다. 이를 위하여 콘크리트의 재료특성을 포물-사각형 응력-변형률 곡선으로 반영한 철근응력과 피복두께의 영향을 반영한 인장증강 계수를 이용한 곡률을 계산할 수 있는 수치 모델링을 실시하였다. 이와 함께 균열폭과 처짐을 계산하는데 필요한 인장증강효과와 유효인장단면적은 균열이 발생한 휨부재 단면의 인장영역을 인장 현재로 이상화하여 정의하였다. 그리고 수정된 인장증강 계수를 이용하여 유효곡률을 계산하였다. 제안된 균열폭과 처짐 산정 방법을 이용하여 여러 연구자들이 수행한 실험 자료를 계산한 결과, 현행 설계기준들의 규정보다 실험값을 비교적 정확하게 예측하는 것으로 나타났다.

• 한국분무공학회지
• /
• 제6권4호
• /
• pp.22-30
• /
• 2001

The objective of this study is to develop the new equations for the calculation of higher heating values(HHVs) of reformed diesel fuels by ultrasonic treatment. Therefore, higher heating values of reformed diesel fuels by ultrasonic treatment are determined experimentally and calculated from their viscosity and surface tension measurements. The HHVs of the fuels are supposed to be a function of viscosity(Pa s) and surface tension(N/cm). The equations developed for the samples represent the correlation obtained by means of regression analysis. The HHVs calculated by developing new equations using viscosities showes the differences from the measured values ranging from -0.66 to 1.19 % and the correlation coefficient was -0.9411. The HHVs calculated by developing new equations using surface tensions showed the differences from the measured values ranging from -0.70 to 1.51 % and the correlation coefficient was 0.9999. The viscosity and the surface tension are characteristic properties of ultrasonic reformed diesel fuels for developing new formulae.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.72-79
• /
• 2008

This paper designs a looper-tension controller for mass-flow stabilization in hot strip finishing mills. By Newton's 2nd law and Hooke's law, nonlinear dynamic equations on the looper-tension system are firstly derived, and linearized by a linearization algorithm using a Taylor's series expansion. Moreover, a tension calculation model is obtained from the nonlinear dynamic equations which is called as a soft sensor of strip tension between two neighboring stands. Next, a looper-tension servo controller is designed by an ILQ(Inverse Linear Quadratic optimal control) algorithm, and it is combined with a minimal disturbance observer which to attenuate speed disturbances by AGC and operator interventions, etc.. Finally, it is shown from by a computer simulation that the proposed ILQ controller with a disturbance observer is very effective in stabilizing the strip mass-flow under some disturbances, moreover it has a good command following performance.

• 한국항해항만학회지
• /
• 제36권8호
• /
• pp.607-612
• /
• 2012

본 논문에서는 선박의 예인 시 소요되는 예인마력을 추정하기 위한 예인저항과 예인삭에 걸리는 장력의 계산방법에 대해 언급하고 있다. 선박이 사고 등으로 인해 자력 운항이 불가할 경우 사고선박을 사고 장소로부터 안전한 곳으로 이동시켜야 하고, 이러한 작업을 수행하기 위해서는 선박을 예인하기 위한 예인선의 예인마력을 추정하여야 한다. 본 연구에서는 예인에 따라 발생하는 저항 성분을 바탕으로 예인저항을 추정하였고, 사용된 예인삭의 종류에 따른 부가저항과 예인삭의 중량에 비례하는 수직성분을 이용하여 예인삭에 걸리는 전체장력을 계산하였다. 아울러 예인삭의 부가저항 계산과정에서는 다양한 예인력에 대해 적용할 수 있도록 다항식맞춤법을 응용하였다. 최종적으로는 도출된 예인저항과 예인삭 장력을 계산할 수 있는 UI를 개발하여 계산에 필요한 각 항목을 손쉽게 입력하여 계산할 수 있도록 하였다.

• 한국수산과학회지
• /
• 제26권1호
• /
• pp.31-40
• /
• 1993

This paper deals with static tension analysis method for Floating Tire Breakwater(FTB). FTB can be used for the limited wave height. It is especially focused on Goodyear type FTB easily applied to the breakwater for the fisheries cultivating region. The numerical examples for FTB design procedure was reviewed. It is also studied the static analysis method of offshore catenary spread mooring system. The general calculation procedure for the tension versus excursion curves for the multi-line system using the basic catenary relationship was studied. Calculation results showed good agreement with some existing mooring results. To extend this mooring force calculating method to the floating fisheries caitivating cages, the strength of synthetic fiber was considered. This analysis method can be used to the estimation of the mooring force for the floating structures such as floating breakwaters and floating artificial reefs.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.162-163
• /
• 2003

• 한국산림과학회지
• /
• 제95권4호
• /
• pp.495-500
• /
• 2006

자주식 반송기를 이용한 가선집재작업의 안정성을 이론적인 계산과 현장 계측을 통해 검토하였다. 가선집재 시스템의 이론적 안정성 평가의 유용성을 입증하기 위하여 스카이라인의 장력과 근주의 저항력을 측정하여 이론 계산값과 비교평가하였다. 그 결과 측정된 스카이라인의 장력과 계산값이 유사하였으며, 이를 통해 전체적인 안정성 검토가 가능하였다. 또한 근주의 저항력은 근주의 직경과 밀접한 관계가 있으며 근주변의 각도가 $5-10^{\circ}$일 때 가장 큰 저항력을 나타내었으며, 그 이상의 각도에서는 지주목으로서의 기능을 잃어버리는 것으로 판단되었다.