• 제목/요약/키워드: Tensile reinforcement

검색결과 772건 처리시간 0.031초

대각선 철근이 있는 PC 벽체의 강도 (Strength of PC walls with Diagonal Reinforcements)

  • 임우영;홍성걸
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.3-4
    • /
    • 2010
  • 대각선 철근이 있는 PC 벽체의 강도를 단면해석을 이용해 구하고자 한다. 대각선 철근의 변형률은 PC 벽체의 주철근의 변형률을 이용해 구할 수 있으며 이러한 변형은 벽체에 추가적인 인장력을 발생시킨다. 대각선 철근에 의한 추가 인장력은 주철근 간격의 1/3지점에서 발생한다고 가정한다.

  • PDF

섬유보강 콘크리트와 보통콘크리트로 합성된 이중 콘크리트 보의 휨 강도 (Flexural Strength of Dual Concrete Beams Composed of Fiber Reinforced Concrete and Normal Concrete)

  • 박대효;부준성;조백순
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.579-584
    • /
    • 2001
  • The reinforced concrete(RC) beam is developed cracks because the compression strength of concrete is strong but the tensile strength is weak. The structural strength and stiffness is decreased by reduction of tension resistance capacity of concrete due to the developed cracks. Using the fiber reinforced concrete that is increased the flexural strength and tensile strength at tensile part can enhance the strength and stiffness of concrete structure and decrease the tensile flexural cracks and deflection. Therefore, The reinforced concrete used the fiber reinforced concrete at tensile part ensure the safety and serviceability of the concrete structures. In this study, analytical model of a dual concrete beam that is composed of the normal strength concrete at compression part and the high tensile strength concrete at tensile part is developed by using the equilibrium condition of forces and compatibility condition of strains and is parted into elastic analytical model and ultimate analytical model. Three group of test beam that is formed of one reinforced concrete beam and two dual concrete beams for each steel reinforcement ratio is tested to examine the flexural behavior of dual concrete beams. The comparative study of total nine test beams is shown that the ultimate load of a dual concrete beams relative to the reinforced concrete beams have an increase in approximately 30%. In addition, the initial flexural rigidity, as used here, refer to the slope of load-deflection curves in elastic state is increased and the deflection is decreased.

  • PDF

섬유혼입률이 UHPC의 초기균열강도 및 휨인장강도에 미치는 영향 (The Effect of Fiber Volume Fraction on First Cracking Strength and Flexural Tensile Strength of UHPC)

  • 강수태;박정준;류금성;고경택;김성욱
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.537-538
    • /
    • 2009
  • 본 연구에서는 UHPC에서 섬유혼입률의 변화에 따른 휨실험체에서의 초기균열강도 및 휨인장강도의 변화를 파악하기 위해 섬유혼입률 5% 범위 내에서 휨실험을 수행하였으며, 그 결과로부터 UHPC에서 초기균열강도 및 휨인장강도는 섬유혼입률이 늘어남에 따라 선형적으로 증가함을 알 수 있었다.

  • PDF

Biodegradable Starch-Based Resin Reinforced with Continuous Mineral Fibres-Processing, Characterisation and Mechanical Properties

  • Wittek, Thomas;Tanimoto, Toshio
    • Advanced Composite Materials
    • /
    • 제18권2호
    • /
    • pp.167-185
    • /
    • 2009
  • Environmental problems caused by extensive use of polymeric materials arise mainly due to lack of landfill space and depletion of finite natural resources of fossil raw materials like petroleum or natural gas. The substitution of synthetic petroleum-based resins with natural biodegradable resins appears to be one appropriate measure to remedy the above-mentioned situation. This study presents the development of a composite that uses environmentally degradable starch-based resin as matrix and natural mineral basalt fibres as reinforcement, and investigates the fibre's and the composite's mechanical properties. The tensile strength of single basalt fibres was verified by means of single fibre tensile tests and statistically investigated by means of a Weibull analysis. Prepreg sheets were manufactured by means of a modified doctor blade system and hot power press. The sheets were used to manufacture specimens with fibre volume contents ranging from 33% to 61%. Specimens were tested for tensile strength, flexural strength and interlaminar shear strength. Composites manufactured during this study exhibited tensile and flexural strength of up to 517 MPa and 157 MPa, respectively.

SHCC 및 고장력 철근 복합 콘크리트 슬래브의 성능실험 (Performance Experiments of SHCC and High Tensile Reinforced Composite Concrete Slabs)

  • 문형주;조창근
    • 한국공간구조학회논문집
    • /
    • 제17권4호
    • /
    • pp.43-50
    • /
    • 2017
  • A type of one-way concrete composite slabs made by strain hardening cementitious composites (SHCC) deck combined with high tensile reinforcements was developed and evaluated by four-point slab bending test. The SHCC material was considered to have an high-ductile and strain hardening behavior in tension after cracking. From experimental comparisons with conventional reinforced concrete slab, the proposed SHCC and high tensile reinforced concrete composite slab showed more improved responses both in service and ultimate load capacities as well as in control of crack width and deflection.

Strength properties of lime stabilized and fibre reinforced residual soil

  • Okonta, Felix N.;Nxumalo, Sinenkosi P.
    • Geomechanics and Engineering
    • /
    • 제28권1호
    • /
    • pp.35-48
    • /
    • 2022
  • The effect of discrete polypropylene fibre reinforcement on shear strength parameters, tensile properties and isotropic index of stabilized compacted residual subgrade was investigated. Composites of compacted subgrade were developed from polypropylene fibre dosage of 0%, 1%, 2.5% and 4% and 3% cement binder. Saturated compacted soil benefited from incremental fibre dosage, the mobilized friction coefficient increased to a maximum at 2.5% fibre dosage from 0.41 to 0.58 and the contribution due to further increase in fibre dosage was marginal. Binder stabilization increased the degree of isotropy for unreinforced soil at lower fibre dosage of 1% and then decreased with higher fibre dosage. Saturation of 3% binder stabilized soil decreased the soil friction angle and the degree of isotropy for both unstabilized and binder stabilized soil increased with fibre dosage. The maximum tensile stress of 3% binder stabilized fibre reinforced residual soil was 3-fold that of 3% binder stabilized unreinforced soil. The difference in computed and measured maximum tensile and tangential stress decreased with increase in fibre dosage and degree of stabilization and polypropylene fibre reinforced soil met local and international criteria for road construction subgrade.

Hybrid Reinforcement System을 이용한 콘크리트 교량상판 슬래브의 거동 (Behavior of Concrete Bridge Deck Using Hybrid Reinforcement System)

  • 박상렬;조근희
    • 콘크리트학회논문집
    • /
    • 제16권4호
    • /
    • pp.451-458
    • /
    • 2004
  • 본 연구는 재래 철근과 Fiber Reinforced Polymer 보강재를 사용한 Hybrid Reinforcement System의 기본 개념과 적용성에 대해 기술하고 있다. 콘크리트 교량상관은 보로서 지지되고 상하 두층의 보강재로 인장보강되어 있다. HRS를 이용한 콘크리트 교량상판에서는 보 지지점 부근의 부모멘트에 대한 상부 인장력은 FRP 봉으로 저항하고 보 지지점 중앙부근의 하부인장력은 재래의 철근으로 저항한다. HRS를 이용한 콘크리트 교량상판은 FRP 봉은 비 부식성이고, 부식되기 쉬운 철근은 교량상판 위로부터 가급적 멀리하여 부식물질의 침투를 막을 수 있는 장점이 있다. HRS를 이용한 콘크리트 교량상판은 또한 극한상태에서 충분한 연성을 가지고 있다. 그 이유는 1) FRP봉은 철근보다 탄성계수가 낮고 파단시의 최대 변형률이 크며, 2) 충분한 FRP 보강량을 사용하면 극한변형률을 낮출 수 있으며, 3) 부모멘트 구간의 일부를 비부착시켜 극한 변형률을 낮출 수 있다. 실험 연구 결과 보통의 FRP보강비의 범위에서는 FRP 및 HRS 콘크리트 슬래브는 FRP봉의 파단이 아니라 콘크리트의 압축에 의해 파피됨을 보여주고 있다. 그러므로 HRS를 이용한 연속 콘크리트 교량상관에서는 정모멘트부의 하부철근이 먼저 항복하여 소성힌지를 형성하고 나중에 부보멘트나 정모멘트부의 콘크리트가 압축파괴되어 FRP 콘크리트 슬래브에 비하여 상당한 소성에너지를 소모한다.

록볼트의 타설 직후의 강도발현 과정 및 효과에 관한 연구 (Study on rock reinforcement process and the effect of produced strength right after rockbolt installation)

  • 이토 준;박해균;김동완;김재권
    • 한국터널지하공간학회 논문집
    • /
    • 제5권2호
    • /
    • pp.189-198
    • /
    • 2003
  • 터널의 대단면화에 따라 각 암반 지보의 역할과 그 보강효과를 확인하고 보다 합리적인 지보구조로의 변화가 요구되고 있다. 특히, 굴착직후 숏크리트에 의한 지보효과가 효과적이지 못한 터널에서는 지보 매커니즘에 대한 추가적인 검토가 필요하다. 강도가 발생하지 않는 터널이 가장 불안한 상태에 있을 때의 지보구조는 충분한 검토가 필요하다. 본 논문에서는 약재령 (若材令)시 록볼트에 의한 보강효과를 볼트 그라우트재의 경화를 고려하여 모의암반에 의한 실험 및 수치해석을 실시하여 시간의존에 따른 그라우트재의 압축강도와 재령, 부착강도와 재령, 부착강성과 재령과의 관계를 명확하게 하는 것으로 굴착직후의 록볼트의 암반보강 효과를 검토하고, 약재령시 록볼트의 모델화 및 물리정수를 산정하였다. 또 그라우트재의 효과를 가지지 않고도 해결되는 수압팽창형 프리쿠션볼트에 의한 굴착직후의 암반보강효과에 대해서도 검토하였다.

  • PDF

전단시험방법에 따른 토목섬유/모래 접촉면에서의 마찰특성 (Friction Characteristics on Interface Between Reinforcement and Sand by Direct Shear Test Methods)

  • 주재우;박종범;장용채
    • 한국지반신소재학회논문집
    • /
    • 제2권1호
    • /
    • pp.39-45
    • /
    • 2003
  • 보강토 지반에서 가장 중요한 부분은 보강재와 흙사이의 접촉부분으로서 이 부분의 전단강도 및 전단거동은 보강효과에 직접적인 영향을 미친다. 보강토 지반에서 접촉부분의 전단특성을 얻는 방법으로서 인발시험방법과 직접전단시험방법 등이 있다. 실제 보강토 구조물내에서 보강재와 흙사이에 인발이 되는 부분, 전단이 되는 부분 등이 존재한다. 전단이 되는 경우에도 보강재가 전혀 변형을 하지 않는 경우와 보강재 자체가 변형이 되는 경우 등으로 나눌 수 있다. 본 연구에서는 대형 전단시험기를 이용하여, 부직포/모래, 지오그리드/모래 등의 접촉면을 갖는 2종의 토목섬유를 이용하여, 토목섬유의 인장변형이 허용되는 자유조건과 인장변형이 억제되는 고정조건 등 두가지 방법으로 직접전단시험을 실시하였다. 실험결과 자유조건에 비해 고정조건으로 시험을 행한 경우가 마찰각이 더 컸다. 그리고 전단응력이 피크가 되는 전단변형의 크기는 자유조건의 경우가 더 큰 값을 가졌다. 잔류응력의 경우는 고정법의 경우가 컸지만 잔류응력비는 자유법의 경우가 더 큰 값을 가졌다.

  • PDF

고강도 콘크리트 말뚝과 기초판 접합부의 최적 철근보강량 산정 (Assessment of Optimum Reinforcement of Rebar for Joint of PHC Pile and Foundation Plate)

  • 박종배;심영종;천영수;박성식;박용부
    • 토지주택연구
    • /
    • 제1권1호
    • /
    • pp.67-73
    • /
    • 2010
  • PHC 말뚝에서 강선을 노출시켜 건축물의 기초판과 연결시키는 기존 강선남김 방식은 강결합과 힌지결합의 중간형태로 공동주택(아파트)과 같은 건축구조물에 흔히 사용되는 방법이다. 그러나 이 방법은 역학적인 성능이 검증되지 않았으며 시공과정도 복잡하다. 이에 본 연구는 기존 관련 연구의 결과를 분석하고, PHC 말뚝의 콘크리트 단면적 대비 강선면적 비인 0.3%를 말뚝 접합부의 최소 철근보강량으로 선정하여 PHC 말뚝과 기초판과의 최적의 철근보강 방법을 말뚝 규격별(PHC 450, PHC 500, 및 PHC 600)로 제시하였다. PHC 말뚝과 기초판 접합부의 역학적 성능(인장강도와 전단강도)을 평가하기 위해 실물크기의 실험을 실시하였다. 그 결과, 모든 경우에 대해 요구강도를 만족하였으며 실제 적용되어도 문제가 없음을 확인하였다. 본 결과는 기존 연구에서 제시되었던 접합부의 철근 보강량보다 그 양이 대폭 감소하는 것으로 나타나 PHC 말뚝 시공 시 원가 절감에도 기여할 것으로 판단된다.