• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.283-291
• /
• 1990

The purpose of this study was to measure and compare tensile and shear strength for 4 types of new direct-bonding brackets and same brackets after recycling and to evaluate the change of bracket slot width after recycling. Four types of new direct-bond brackets were bonded to recently extracted human premolar teeth and the tensile and shear strength was measured by Universal Testing Machine. The brackets were recycled by chemical process and the tensile and shear test was repeated. To evaluate the change of the bracket slot width, slot width was measured by the Topcon Universal Measuring Microscope before and after recycling. Following results were obtained: 1. There was no satistically significant difference between the tensile and shear strength of recycled brackets and those of new brackets. 2. In both new and recycled brackets, the tensile and shear strength of perforated base bracket was lower than those of photoetched, foilmesh and contou-lok mesh base brackets. (P<0.01) 3. There was no statistically significant difference in bonding strengths of control group bonded only once and two times. 4. There was no statistically significant difference in the change of the bracket slow width after recycling process. 5. Of the failure, the combination type (58%) in the tensile strength and the tooth adhesive interface (65%) in the shear strength was the most common type.

• The Journal of Advanced Prosthodontics
• /
• 제1권2호
• /
• pp.63-67
• /
• 2009

STATEMENT OF PROBLEM. Use of custom tray and tray adhesive is clinically recommended for elastomeric impression material. However there is not clear mention of drying time of tray adhesive in achieving appropriate bonding strength of tray material and impression material. PURPOSE. This study is to investigate an appropriate drying time of tray adhesives by evaluating tensile bonding strength between two types of polyvinylsiloxane impression materials and resin tray, according to various drying time intervals of tray adhesives, and with different manufacturing company combination of impression material and tray adhesive. MATERIAL AND METHODS. Adhesives used in this study were Silfix (Dentsply Caulk, Milford, Del, USA) and VPS Tray Adhesive (3M ESPE, Seefeld, Germany) and impression materials were Aquasil Ultra (monophase regular set, Dentsply Caulk, Milford, Del, USA) and Imprint II Garant (regular body, 3M ESPE, Seefeld, Germany). They were used combinations from the same manufacture and exchanged combinations of the two. The drying time was designed to air dry, 5 minutes, 10 minutes, 15 minutes, 20 minutes, and 25 minutes. Total 240 of test specimens were prepared by auto-polymerizing tray material(Instant Tray Mix, Lang, Wheeling, Il, USA) with 10 specimens in each group. The specimens were placed in the Universal Testing machine (Instron, model 3366, Instron Corp, University avenue, Nowood, MA, USA) to perform the tensile test (cross head speed 5 mm/min). The statistically efficient drying time was evaluated through ANOVA and Scheffe test. All the tests were performed at 95% confidence level. RESULTS. The results revealed that at least 10 minutes is needed for Silfix-Aquasil, and 15 minutes for VPS Tray Adhesive-Imprint II, to attain an appropriate tensile bonding strength. VPS Tray Adhesive-Imprint II had a superior tensile bonding strength when compared to Silfix-Aquasil over 15 minutes. Silfix-Aquasil had a superior bonding strength to VPS Tray Adhesive-Aquasil, and VPS Tray Adhesive-Imprint II had a superior tensile bonding strength to Silfix-Imprint II at all drying periods. CONCLUSION. Significant increase in tensile bonding strength with Silfix-Aquasil and VPS Tray adhesive-Imprint II combination until 10 and 15 minutes respectively. Tray adhesive-impression material combination from the same company presented higher tensile bonding strength at all drying time intervals than when using tray adhesive-impression material of different manufactures.

• Computers and Concrete
• /
• 제26권2호
• /
• pp.115-125
• /
• 2020

To reduce the damage of concrete in fire, a new type of lightweight cinder aggregate concrete was developed due to the excellent fire resistance of cinder. To further enhance its fire resistance, Polypropylene (PP) Fibers which can enhance the fire resistance of concrete were also used in this type of concrete. However, the bond behavior of this new type of concrete after fire exposure is still unknown. To investigate its bond behavior, 185 specimens were heated up to 22, 200, 400, 600 or 800℃ for 2 h duration respectively, which is followed by subsequent compressive and tensile tests at room temperature. The concrete-rebar bond strength of C30 PP fiber-reinforced cinder concrete was subsequently investigated through pull-out tests after fire exposure. The microstructures of the PP fiber-reinforced cinder concrete and the status of the PP fibre at different temperature were inspected using an advanced scanning electron microscopy, aiming to understand the mechanism of the bonding deterioration under high temperature. The effects of rebar diameter and bond length on the bond strength of PP fiber-reinforced cinder concrete were investigated based on the test results. The bond-slip relation of PP fiber-reinforced cinder concrete after exposure at different temperature was derived based on the test results.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권2호
• /
• pp.133-144
• /
• 2006

FRP 판은 외부 부착된 보강 판의 효과적인 부착강도의 증진으로 실질적으로 부착강도에 대한 많은 연구가 수행되어왔다. 선행연구자들은 이러한 부착강도를 알아보기 위하여 다양한 변수를 설정하여 실험을 통하여 FRP 판의 부착강도를 규명하였다. 그러나, 이러한 부착강도를 알아보기 위한 실험은 장비구축의 비용과 시간 소비가 많이 되고 수행하기 어렵기 때문에 국한적으로 수행되고 있다. 본 연구는 선행연구자들의 부착실험 데이터를 다양한 신경망 모형과 알고리즘을 적용하여 최적의 인공신경망 모형을 개발하는데 그 목적이 있다. 인공신경망 모형의 출력층은 부착강도, 입력층은 FRP 판의 두께, 폭, 부착 길이, 탄성계수, 인장강도와 콘크리트의 압축강도, 인장강도, 폭을 변수로 선정하여 학습을 수행하였다. 개발된 인공신경망 모형은 역전파 학습 알고리즘을 적용하였으며, 오차는 0.001범위에 수렴되도록 학습을 하였다. 또한, 일반화 과정은 Bayesian 기법을 도입함으로써 보다 일반화된 방법으로 과대적합의 문제를 해소하였다. 개발된 모형의 검증은 학습에 이용되지 않은 다른 선행연구자들의 부착강도 결과 값과 비교함으로서 실시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.373-378
• /
• 2002

The waterproofing system's performance is known to show a determining by complex interaction of material factors, design details, and the qualify of construction, and the waterproofing integrity of waterproofing membranes is determined by the bond to the deck and the amount of damage to the waterproofing membrane. In this research, the basic properties of waterproofing membranes on market and the tensile adhesive characteristics of waterproofing systems of concrete bridge deck have also been investigated in the view of the damages frequently reported from job site. As a results of tensile adhesive strength of waterproofing system, tensile strength is decrease with surface moisture contents except for inorganic-elastomeric liquid waterproofing membrane, and increase with strength of deck slab. Also tensile adhesive strength is generally increase in case of moisture curing of specimen because of pore structure and surface leveling. The after asphalt concrete paving tends to increase more than before those. The results of the liquid waterproofing membranes are upside-down, and the more concrete has strength, the more strength of tensile adhesive increase. The ambient temperature and the rolling temperature of asphalt concrete when application of the waterproofing membrane has considerable influence on the performance of waterproofing system.

• 한국안전학회지
• /
• 제24권3호
• /
• pp.7-12
• /
• 2009

The tensile and fatigue experiments were conducted with tensile-peel specimens for investigating on strength of adhesively bonded and mechanical press joints of aluminum sheet used in the field of the automobile industry. The combining epoxy adhesive bonding and mechanical press joining exhibits an increase in joining force as a result of interaction between static forces of the two joining methods. The fatigue strength of pure adhesive joint was measured as 91% of that of the combination of adhesive bond and mechanical press joint, suggesting that the interaction between the bonding and mechanical joining was about 9%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.122-123
• /
• 2017

In this study, the tensile behavior of single and hybrid fiber reinforced cement composite according to strain rate was evaluated. Experimental results, in the strain rate 10-6/s, fiber reinforced cement composite showed improved of tensile strength and decrease of strain at peak stress as SSF volume content increased. In the strain rate 101/s, the single and hybrid reinforced cement composite' s tensile properties are improved, because of the improved bond strength between the fiber and matrix. And hybrid fiber reinforced cement composite showed high energy absorption capacity, because the SSF prevented the cracking and fracture of the surrounding matrix when during the HSF pull-out.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.87-88
• /
• 2018

In this study, the tensile properties of single and hybrid fiber reinforced cement composite according to strain rate was evaluated. Experimental results, in the strain rate 10^-6/s, fiber reinforced cement composite showed improved of tensile strength and decrease of strain at peak stress as SSF volume content increased. In the strain rate 101/s, the single and hybrid reinforced cement composite's tensile properties are improved, because of the improved bond strength between the fiber and matrix. And hybrid fiber reinforced cement composite showed high energy absorption capacity, because the SSF prevented the cracking and fracture of the surrounding matrix when during the HSF pull-out.

• Journal of Oral Medicine and Pain
• /
• 제31권3호
• /
• pp.211-221
• /
• 2006

목적 전통적 고속 회전식 절삭기구 또는 Er:YAG 레이저로 삭제된 상아질에, 두가지 다른 접착 시스템을 적용한 후, 축조한 컴포지트 레진의 미세인장결합강도를 비교하고, 다양한 Er:YAG 레이저 에너지가 미세인장결합강도에 미치는 영향을 평가한다. 재료 및 방법 40개의 제3대구치를 사용하여, 평평한 상아질면을 만든 후 8개의 군으로 나누어, 4가지 절삭방법 (고속 회전식 절삭기구, 2 W, 3 W, 4 W 출력의 Er:YAG 레이저) 중 한 가지로 삭제하고, 2가지 접착 시스템 (Scotchbond Multipurpose Plus, Clearfil SE bond) 중 한 가지로 처리하여 컴포지트 레진을 축조하였다. 24시간의 저장 후, 각 시편을 결합면에 수직으로 자르고, 미세인장결합강도를 측정하였다. 각 군의 미세인장결합강도는 평균$\pm$표준 편차로 표현하였고, 통계분석을 위해 two-way ANOVA, one-way ANOVA, student-Newman-Keuls' multiple comparison test, 그리고 t-test가 사용되었다. 결과 및 결론 1. 접착시스템과 관계없이, 절삭방법에 따른 미세인장결합강도의 유의한 차이가 있었고, 높은 순서대로 나열하면 다음과 같다: 3 W, 2 W, Bur, 4 W (p<0.001). 2. 절삭방법과 관계없이, Scotchbond Multipurpose Plus로 처리한 군이 Clearfil SE bond로 처리한 군보다 유의하게 높은 미세인장결합강도를 나타냈다 (p<0.001). 3. Scotchbond Multipurpose Plus로 처리한 군 중에서, 3 W 레이저 절삭군이 가장 높은 미세인장결합강도를 나타냈고, 다음이 Bur, 2 W, 4 W 절삭군 순이었다 (p<0.001). 4. Clearfil SE bond로 처리한 군 중에서 3 W 레이저 절삭군이 가장 높은 미세인장결합강도를 나타냈고, 다음이 2 W, 4 W, Bur 절삭군 순이었다 (p<0.001). 5. 두 가지 접착 시스템 모두에서, 레이저로 절삭한 군의 미세인장결합강도의 차이가 있었고, 높은 순서대로 나열하면 3 W, 2 W, 4 W 순이었다 (p<0.001). :상아질에 접착된 컴포지트 레진의 미세인장결합강도는 절삭방법과 접착시스템의 상호작용에 의해 유의한 영향을 받았다. 임상에서 레진 수복시, 2 W-3 W 범위내로 Er:YAG laser를 사용한다면 전통적 핸드피스 못지않게 수복물의 우수한 결합강도를 얻을 수 있다. 특히 시술시간의 단축, 과도한 산부식에 따른 부작용의 예방을 위해 Clearfil SE bond를 포함한 self etching system을 사용하고자 한다면 bur보다 Er:YAG laser를 이용한 삭제방법이 더 유용한 결합력을 제공할 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제16권1호
• /
• pp.21-44
• /
• 1988

팔만칩 및 톱밥을 보오드에 활용(活用)하기 위한 방안(方案)의 하나로, 이들의 취약한 처리(物理) 및 기계적(機械的) 성질(性質)을 개선(改善)시키기 위하여 비목질재료(非木質材料)인 폴리프로필렌망(網)을 결체(結締)하여 보오드를 제조(製造)하였다. 보오드의 제조조건(製造條件)은 비중(比重)을 0.40, 0.55, 0.70 및 0.85의 4수준으로 하고 수지첨가율(樹脂添加率)을 8%, 10%, 12% 및 14%의 4수준으로 하였으며, 망수(網數)는 1장에서 4장으로 하여 보오드를 각각 제조(製造)하였다. 이들 보오드의 물리(物理) 및 기계적(機械的) 성질(性質)은 두께팽창율(膨脹率), 휨파괴계수(破壞係數), 휨탄성계수(彈性係數), 인장강도(引張强度), 박리저항(剝離抵抗) 및 나사못보지력(保持力) 등을 측정조사(測定調査)하고 고찰(考察)하였는데 본연구(本硏究)에서 얻은 중요한 결론(結論)은 다음과 같다. 1) 지수첨가율(指數添加率)이 증가함에 따라 두께팽창율(膨脹率)은 감소(減少)하였고, press-lam 보오드는 일반성형(一般成形)보오드 보다 낮은 값을 보여 주었다. 2) 보오드의 휨파괴계수(破壞係數) 및 탄성계수(彈性系數)는 비중(比重)이 증가하였으며 press-lam 보오 드는 일반적형(一般的形)보오드보다 높은 값을 나타내었다. 망수(網數)가 증가함에 따라 휨파괴계수(破壞係數)는 증가하였고, 수지첨가율(樹脂添加率)이 증가함에 따라서도 같은 양상이 나타났으나 휨탄성계수(彈性係數)의 경우 망수(網數)에 따른 효과(效果)는 나타나지 아니하였다. 3) 비중(比重)이 증가함에 따라 보오드의 인장강도(引張强度)는 증가하였으며, 망구성(網構成)보오드는 대조보오드보다 높은 값을 나타내었다. 또 망수(網數)가 증가함에 따라서도 인장강도(引張强度)는 증가하였으며, press-lam 보오드는 일반적형(一般的形)보오드보다 높은 인장강도치(引張强度値)를 보여 주었다. 4) 보오드의 박리저항(剝離抵抗)은 비중(比重)이 증가함에 따라 증가하였으며 망(網)을 결체(結締)한 보오드는 대조보오드 보다 모두 낮은 값을 보여 주었다. 기수매구성(奇數枚構成)보오드는 우수매구성(偶數枚構成)보오드보다 낮은 박리저항치(剝離抵抗値)를 보였다. 5) 수지첨가율(樹脂添加率) 및 비중(比重)이 증가함에 따라 나사못 보지력(保持力)은 증가하였으나, 망구성(網構成)보오드와 대조보오드사이에서의 차이는 크지 아니하였다. presslam 보오드에서 팔만칩보오드의 경우 고비중(高比重)보오드가, 톱밥보오드의 경우 저비중(低比重)보오드가 각각 대조보오드보다 높은 값을 보여 주었다.