• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.139-142
• /
• 1990

A gas sensor, comprised of both ZnO and $PdCl_2$ powders, has been developed to sense the CO gas of low concentration (100 ppm). When the weight ratio of ZnO/$PdCl_2$ element sintered at $600^{\circ}C$ was 99.5/0.5, the maximum sensitivity to CO gas was obtained at the operating temperature of $200^{\circ}C$. Also, the response characteristics of this element were examined, and then the response time was decreased from 90 to 45 sees, with operating temperature increase in the range of $100-400^{\circ}C$.

• Journal of the Korean Home Economics Association
• /
• v.35 no.6
• /
• pp.101-110
• /
• 1997

The intent of this study is to propose a method for appraisal of the indoor thermal environment of apartment housing by measuring physical factors and residents' response to questionnaire survey. The experiments were performed on eight houses each in summer (August 18 through 31,1995) and winer (february 16 through 20,1996). It included measurements of indoor air temperature, globe temperature, relative humidity, and CO2 concentration. The questionnaire surveys were performed each in summer (July 16 through 20, 1996) and winer (February 13 through 16, 1996). And 248 cases in summer and 297 cases in winter were used in analysis. These questionnaire surveys asked residents' response about thermal sensation, humidity sensation, sense of air freshness regarding the indoor thermal environment. data acquired through the experiments and questionnaire surveys were then transferred to scales that allowed relative comparison, and measured to an appraisal standard chart. Appraisal tools included appraisal charts and radar charts. Indoor thermal environment was judged to be positive according to experiments, but residents appraised the thermal environment to be average. This difference between the two can be found in the strict standards by which residents judge the thermal environment of their apartments.

• Journal of the Korean Mathematical Society
• /
• v.44 no.6
• /
• pp.1397-1415
• /
• 2007

We consider an inverse heat conduction problem(IHCP) in a quarter plane which appears in some applied subjects. We want to determine the heat flux on the surface of a body from a measured temperature history at a fixed location inside the body. This is a severely ill-posed problem in the sense that arbitrarily "small" differences in the input temperature data may lead to arbitrarily "large" differences in the surface flux. A semi-discrete central difference scheme in time is employed to deal with the ill posed problem. We obtain some error estimates which also give the information about how to choose the step length in time. Some numerical examples illustrate the effects of the proposed method.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.2 no.2
• /
• pp.229-237
• /
• 1995

The purpose of this study is to define requisite content of physiology for nursing education. This study classifies the subjects of physiology into 15 areas. The areas are cell and cell membrane, body fluid, nervous system, special sense, muscular system, blood, cardiovascular system, respiratory system, urinary system, digestive system, energy metabolism, body temperature, immune system, endocrine system, and reproductive system. Each subject area is further classified into subarea, resulting in a total of 194 subarea. The importance of each subarea is measured with a 3-point scale using a questionnaire. The subjects of this study were full-time professors teaching nursing in Korean universities. The analysis of the data collected from 68 respondents is as follows. 1. The areas of physiology necessary for nursing education in the order of importance are : body fluid, blood, endocrine, immune system, body temperature, urinary system, respiratory system, digestive system, reproductive system, energy metabolism, nervous system, cardiovascular system, cell and cell membrane, muscular system, and special sense. 2. Depending on the specific areas of nursing(such as pediatric nursing, maternity nursing), the importance of each physiology area may differ. For instance, the most important area for maternity nursing is reproductive physiology, whereas one for the psychiatric nursing is neuro-physiology. 3. The importance of each physiology area does not determine the importance of its subarea. For example, while the importance of cell and cell membrane was relatively very low across the respondents from different areas of nursing science, the importance of such subarea as osmosis, diffusion, and filteration reported by most respondents were high.

• Journal of Korea Game Society
• /
• v.15 no.6
• /
• pp.7-16
• /
• 2015

To improve the sense of unity between game players and game world avatars, we propose a method to measure game player's physical status and manipulate game character appearances and behavior using the measurements. To measure the status, we implemented a hardware module that perceive the body temperature. We implemented a 3D horror game whose game space is a common subway space ordinarily encountered in daily life so that ordinary people can easily get used to the game environment. The experiments of applying the measurement data from the game player to the game world avatar shows that the player's physical status can be effectively utilized to improve the sense of reality in gameplay.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.778-781
• /
• 2002

In this paper, we designed the anti-fuse program circuit, and there are an anti-fuse program/sense/latch circuit, a negative voltage generator, power-up circuit and etc. in this circuit. An output voltage of a negative voltage generator is about -4,51V. We detected certainly it regardless of simulation result power rise time or temperature change to detect the anti-fuse program state of an anti-fuse program/sense/latch circuit and were able to know what performed a steady action. And as a result of having done a simulation while will change a resistance value voluntarily in order to check an anti-fuse resistance characteristic of this circuit oneself, it recognized as a programmed anti-fuse until 23k$\Omega$, and we were able to know that this circuit was a lot of margin than general anti-fuse resistance 500$\Omega$. Therefore, the anti-fuse program circuit of this study showed that was able to apply for configuration of the programmable logic device.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.2
• /
• pp.15-27
• /
• 2016

Since restoration of damaged geomorphological sites is almost impossible, it is necessary, to select and conserve geomorphological heritages in a preemptive action. Algific (=producing cold) sites are one of the natural resources which have not been protected well due to the lack of understanding of their value, despite their conservation importance. This research aimed to help people to recognize such geosites' actual value and make them understand the necessity of protecting these sites. Algific areas are valuable by the simple fact that it is a mysterious phenomenon in which the ice forming may happen even in the mid-summer and the environment is always cool. Algific sites deserve geomorphological research in the sense that topographic condition called talus causes this phenomenon. They are also valuable in plant geographic sense because northern rare plants survive isolatedly due to low-temperature environment of these sites. Their cultural-historical value is also high by the fact that they have been connected closely with local residents' lives shown by its nicknames, "natural refrigerator" or "natural air conditioner".

• Journal of Animal Science and Technology
• /
• v.60 no.4
• /
• pp.7.1-7.5
• /
• 2018

Background: Mice are widely accepted research models of great clinical significance. Maintenance of laboratory mice breed is an essential aspect for performing research activities in various fields of science. Infanticide is one of the prominent causes of litter loss during maintenance of laboratory mice stock. The present study is an effort to monitor the effect of change in ambient temperature of female mice below the normal range on cannibalism and infanticide during early postparturition phase. Adult female Swiss albino mice have been divided into two groups of control and treatment. On the day of litter group one was maintained under controlled temperature conditions (minimum $20^{\circ}C$ to maximum $23^{\circ}C$) throughout, while female mice belong to group two have been exposed to variation of room temperature (maximum $15^{\circ}C$ to minimum $10^{\circ}C$ for two nights and one day) until 36 h postparturition. Results: The effects of temperature changes were observed on the infanticide behaviour of dams along with the survival of pups in early postparturition phase till 36 h after delivery. The significant statistical difference (P < 0.05) was reported in infanticide behaviour of dams when control and treatment group was compared. It is observed that decrement in surrounding temperature promotes decrement in the ambient body temperature of dams during early postparturition. It is proposed that alteration of hypothalamic homeostasis due to temperature change induces cannibalism and infanticide behaviour. Lack of thermoregulation during early postparturition creates the sense of insecurity, in-satiety, anxiety and stress. Conclusions: Authors strongly recommend the maintenance of body and surrounding temperature to prevent infanticidal behaviour and cannibalism within Swiss albino mice population. Further investigations are advisable to authenticate the active behavioural and biochemical pathway behind the phenomena.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.3
• /
• pp.175-181
• /
• 2015

Because internal space of combat vehicle reachs about $80^{\circ}C$ at high temperature period, Proximity Sensor exposed high temperature and humidity, which has function to sense the distance and transfer signal for control unit, have enlarged sensing distance and finally locked on. Malfunction of sensing itself occur frequently, therefore we carried out cause analysis and improvement. We accomplish improvement activity secondly. Through-out many trial and error, we find out that malfunction of sensor occur at high temperature circumstance. To improve, the another Emitter Coil is added to increase voltage difference and improve sensing accuracy about 5~10 times. And we accomplish design improvement to dull temperature and humity change after increasing molding surface to add vibration and shock resistance. We prove that the improved product do not fail after enduring 136hr at $85^{\circ}C$ temperature and 85% relative humidity circumstance chamber.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.341-346
• /
• 2020

Motion sickness or dizziness caused by visual and other sensory inconsistencies In virtual reality content seems to be a major problem. To solve the problem, research has been actively underway to satisfy the five senses. Among them, the most researches on the touch are many studies on hardness and texture, but the studies on temperature seem relatively small. Therefore, in this paper, we present a calculation model that can sense the temperature derived from the principle of heat energy moving from high temperature to low temperature, not the temperature of the material. Because heat energy is determined by the heat conductivity, temperature, and area of contact, which are the inherent characteristics of a material, the degree of heat felt by a person depends on the type of material, the temperature of the material and the area of contact with the object. The thermal energy shift per unit time of the material was calculated using the thermal conductivity law and the specific heat formula, and the thermal energy reproduction method that changes per unit time of the material was studied using the thermoelectric element.