• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.151-155
• /
• 2003

An apparatus was developed to repetitively apply a -196 $^{\circ}C$ thermal load to coupon-sized mechanical test specimens. Using this device, IM7/5250-4 (carbon / bismaleimide) cross-ply and quasi-isotropic laminates were submerged in liquid nitrogen (L$N_2$) 400 times. Ply-by-Ply micro-crack density, laminate modulus, and laminate strength were measured as a function of thermal cycles. Quasi-isotropic samples of IM7/977-3 (carbon / epoxy) composite were also manually cycled between liquid nitrogen and an oven set at 120 $^{\circ}C$ for 130 cycles to determine whether including elevated temperature in the thermal cycle significantly altered the degree or location of micro-cracking. In response to thermal cycling, both materials micro-cracked extensively in the surface plies followed by sparse cracking of the inner plies. The tensile modulus of the IM7/5250-4 specimens was unaffected by thermal cycling, but the tensile strength of two of the lay-ups decreased by as much as 8.5 %.

• Smart Structures and Systems
• /
• 제26권2호
• /
• pp.185-193
• /
• 2020

Nonlinear vibration of sandwich plate with functionally graded material (FGM) core and carbon nano tubes reinforced (CNTs) nano-composite layers by considering temperature-dependent material properties are studied in this paper. Base on Classical plate theory (CPT), the governing partial differential equations of motion for sandwich plate are derived using Hamilton principle. The Galerkin procedure and multiple scales perturbation method are used to find relation between nonlinear frequency and amplitude of vibration response. The dynamic responses of the sandwich plate are also investigated in both time and frequency domains. Then, the effects of nonlinearity, excitation, power law index of FG core, volume fraction of carbon nanotube, the function of material variations of FG core, temperature changes, scale transformation parameter and damping factor on the frequency responses are investigated.

• 전자공학회논문지A
• /
• 제32A권7호
• /
• pp.85-93
• /
• 1995

In this study, phthalocyanine thin films were prepared by vacuum sublimation method and investigated sensing characteristics of the films. The phthalocyannies used for the prepaation of the NO$_{x}$ sensors were metal-free Pc(H$_{2}$Pc) and metal Pc(CuPc, CoPc, PbPc). And the substrate temperatures maintained during the fomation of Pc films were varied between R.T. and 200$^{\circ]C$, and the base pressure was 5${\times}10^{6}$ torr. The relationships between NO$_{2}$ sensing properties and SEM analyses as a function of substrate temperatures during the formation of the films were investigated. Among the Pc films, PbPc film showed the best sensing characteristics. Particularlly, the PbPc films prepared at 70$^{\circ]C$ of the substrage temperature showen good sensitivity of 85% to 1ppm NO$_{2}$ gas at operating temperature 190$^{\circ]C$ and response time was about 24 seconds.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1558-1563
• /
• 2004

This work applies the nonequilibrium molecular dynamics simulation method to study a Lennard-Jones liquid thin film suspended in the vapor and calculates the thermal conductivity by linear response function. As a preliminary test, the thermal conductivity of pure argon fluid are calculated by nonequilibrium molecular dynamics simulation. It is found that the thermal conductivity decrease with decreasing the density. When both argon liquid and vapor phase are present, the effects of the system temperature on the thermal conductivity are investigated. It can be seen that the thermal conductivity of liquid-vapor interface is constant with increasing the temperature

• Bulletin of the Korean Chemical Society
• /
• 제16권2호
• /
• pp.126-129
• /
• 1995

Linear and nonlinear optical properties of CuCl nanocrystals in silica glass have been studied using low temperature absorption, degenerate four wave mixing (DFWM), and time-resolved photoluminescence spectroscopy. Assuming a spherical shape, effective radius of the CuCl quantum dots was estimated to be 2.5 nm, which is obtained from low temperature absorption data. The DFWM experiment was performed in 380-386 nm wavelength region, and the diffracted signal was measured as a function of wavelength with 1.0 nm interval. Time-resolved photoluminescence measurement was also carried out at 77 K to obtain the time response of CuCl nanocrystals. The experimental results on the large third order nonlinear optical of CuCl quantum dots are explained in terms of crystal size and oscillator strength of quantum spheres.

• 대한기계학회논문집A
• /
• 제34권5호
• /
• pp.619-628
• /
• 2010

차세대 의료기기 시장을 변화시킬 것으로 기대되는 형상기억합금(SMA) 기반의 최소침습용 의료기기는 시술자의 손동작과 같은 유연성과 섬세함을 구현할 수 있는 장점이 있다. 그러나 SMA의 비선형 열전기적 특성으로 인해 SMA 기반 차세대 의료기기 엑추에이터는 자유로운 방향조종 구현이 제한적이고 상용화에 있어서 큰 한계성으로 작용한다. 본 논문은 SMA의 효과적인 온도제어를 위해 전류-온도간의 개방루프 계단응답을 분석하고 1차 미분방정식 해와 비교하여 온도제어에 필요한 파라미터 $t_1$을 도출한 뒤 실험적으로 그 기능을 검증하였다. 또한 $t_1$은 전류를 입력으로 온도를 출력으로 하는 시불변 선형계의 특성함수의 폴(pole)이므로 주파수에 의한 온도제어에 관계된 파라미터인 것으로 나타났다. 본 논문의 결과는 SAM 기반의 차세대 의료기기 액추에이터의 효과적인 위치제어 설계에 응용될 수 있다.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.8-13
• /
• 2015

The experimental design methodology was applied in the drop tube furnace (DTF) to predict the various combustion properties according to the operating conditions and to assess the coal plant safety. Response surface method (RSM) was introduced as a design of experiment, and the database for RSM was set with the numerical simulation of DTF. The dependent variables such as burnout ratios (BOR) of coal and $CO/CO_2$ ratios were mathematically described as a function of three independent variables (coal particle size, carrier gas flow rate, wall temperature) being modeled by the use of the central composite design (CCD), and evaluated using a second-order polynomial multiple regression model. The prediction of BOR showed a high coefficient of determination (R2) value, thus ensuring a satisfactory adjustment of the second-order polynomial multiple regression model with the simulation data. However, $CO/CO_2$ ratio had a big difference between calculated values and predicted values using conventional RSM, which might be mainly due to the dependent variable increses or decrease very steeply, and hence the second order polynomial cannot follow the rates. To relax the increasing rate of dependent variable, $CO/CO_2$ ratio was taken as common logarithms and worked again with RSM. The application of logarithms in the transformation of dependent variables showed that the accuracy was highly enhanced and predicted the simulation data well.

• Structural Engineering and Mechanics
• /
• 제68권5호
• /
• pp.563-573
• /
• 2018

Temperature-induced responses, such as strains and displacements, are related to the boundary conditions. Therefore, it is required to determine the boundary conditions to establish a reliable bridge model for temperature-induced responses analysis. Particularly, bridge bearings usually present nonlinear behavior with an increase in load, and the nonlinear boundary conditions cause significant effect on temperature-induced responses. In this paper, the bridge nonlinear boundary conditions were simulated as bilinear translational or rotational springs, and the boundary parameters of the bilinear springs were identified based on the measured temperature-induced responses. First of all, the temperature-induced responses of a simply support beam with nonlinear translational and rotational springs subjected to various temperature loads were analyzed. The simulated temperature-induced strains and displacements were assumed as measured data. To identify the nonlinear translational and rotational boundary parameters of the bridge, the objective function based on the temperature-induced responses is then created, and the nonlinear boundary parameters were further identified by using the nonlinear least squares optimization algorithm. Then, a beam structure with nonlinear translational and rotational springs was simulated as a numerical example, and the nonlinear boundary parameters were identified based on the proposed method. The numerical results show that the proposed method can effectively identify the parameters of the nonlinear boundary conditions. Finally, the boundary parameters of a real arch bridge were identified based on the measured strain data and the proposed method. Since the bearings of the real bridge do not perform nonlinear behavior, only the linear boundary parameters of the bridge model were identified. Based on the bridge model and the identified boundary conditions, the temperature-induced strains were recalculated to compare with the measured strain data. The recalculated temperature-induced strains are in a good agreement with the real measured data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1243-1247
• /
• 1996

In this paper, a small PLC system is designed and developed for the distributed building control and fire control system. It uses 8031, a 8-bit micro controller from Intel Inc. The size of the PLC is $7cm{\times}8cm$ and the PLC can accept 4 sensor inputs and drive 4 relay outputs, which operates at 24V. Multiple access of PLC by one host computer is implemented by assigning a unique 10 to each PLC, which ranges from 0 to 126. The operation starts by sending a command packet from host computer to a PLC and the PLC of the same 10 fetches the command packet by comparing the first byte of the command packet with its own 10. The PLC is programmed to perform a various functions and the function is selected by the content of the command byte, which is the second byte of the command packet. The third byte, which is the last byte, is a checksum byte. The checksum byte is the sum of the first byte and the second byte and is used to detect the communication error. Depending on the content of the command byte, PLC performs the desired function and returns the response packet back to the host computer. The response packet is also a three-byte packet, 10 byte, response byte and checksum byte. For the independent operation of PLC without being controlled by the host computer, variable length RULE data packet is sent to PLC. In case the communication line is broken, the PLC perform the independent operation by referencing the RULE data. The applicable areas are; building automation system, distributed factory automation, measurement of temperature of toxic or dangerous area.

• Journal of Microbiology and Biotechnology
• /
• 제20권2호
• /
• pp.403-409
• /
• 2010

Saccharomyces cerevisiae Hsp30 is a plasma membrane heat shock protein that is induced by various environmental stress conditions. However, the functional role of Hsp30 during diverse environmental stressors is not presently known. To gain insight into its function during thermal stress, we have constructed and characterized a ${\Delta}hsp30$ strain during heat stress. $BY4741{\Delta}hsp30$ cells were found to be more sensitive compared with BY4741 cells, when exposed to a lethal heat stress at $50^{\circ}C$. When budding yeast is exposed to either heat shock or weak organic acid, it inhibits Pma1p activity. In this study, we measured the levels of Pma1p in mutant and Wt cells both during optimal temperature and heat shock temperature. We observed that $BY4741{\Delta}hsp30$ cells showed constitutive reduction of Pma1p. To gain further insights into the role of Hsp30 during heat stress, we compared the total protein profile by 2D gel electrophoresis followed by identification of differentially expressed spots by LC-MS. We observed that contrary to that expected from thermal-stress-induced changes in gene expression, the ${\Delta}hsp30$ mutant maintained elevated levels of Pdc1p, Trx1p, and Nbp35p and reduced levels of Atp2p and Sod1p during heat shock. In conclusion, Hsp30 is necessary during lethal heat stress, for the maintenance of Pma1p and a set of thermal stress response functions.