• 제목/요약/키워드: Temperature programmed desorption

검색결과 107건 처리시간 0.03초

Growth of ${\gamma}$-Al2O3 (111) on an ultra-thin interfacial Al2O3 layer/NiAl(110)

  • Lee, M.B.;Frederick, B.G;Richardson, N.V.
    • Journal of Korean Vacuum Science & Technology
    • /
    • 제2권2호
    • /
    • pp.63-77
    • /
    • 1998
  • The oxidation of NiAl(110) was investigated in the temperature regime between 300K and 1300 K using LEED (low energy electron diffraction), TPD (temperature programmed desorption) and HREELS (high resolution electron energy loss spectroscopy). The adsorption of N2O and O2 up to reconstructions. Stepwise annealing of the oxygen-saturated sample from 600 K to 1300K in UHV (ultra-high vacuum,) results in firstly the onset of randomly oriented then finally fairly well-ordered. 5 ${\AA}$ Al2O3 film with quasi-hexagonal periodicity. Ordered thicker oxide films of 18-30 ${\AA}$ seem to be grown on this interfacial oxide layer by direct oxidation of sample at elevated temperature between 1150 and 1300 K because of the LEED pattern consisting of new broad hexagonal spots and the previous 5 ${\AA}$ spots. Although the periodicity of surface oxygen arrays shows no significant change from an hexagonal close-packing, the O-O distance changes from ∼3.0 ${\AA}$ film to ∼2.9 ${\AA}$ for thicker oxides. with the appearance of Auger parameter, for the 5${\AA}$ film can be described better as an interfacial oxide layer. The observation of three symmetric phonon peaks can be also a supporting evidence for this phase assignment since thicker oxide films on the Same Ni2Al3(110) show somewhat different phonon structure much closer to that of the ${\gamma}$-Al2O3. The adsorption/desorption of methanol further proves the preparation of less-defective and/or oxygen-terminated Al2O3 films showing ordered phase transitions with the change of oxide thickness between 5 ${\AA}$ to 30 ${\AA}$.

  • PDF

Hydrogen Absorption by Crystalline Semiconductors: Si(100), (110) and (111)

  • 정민복;조삼근
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.383-383
    • /
    • 2010
  • Gas-phase hydrogen atoms create a variety of chemical and physical phenomena on Si surfaces: adsorption, abstraction of pre-adsorbed H, Si etching, Si amorphization, and penetration into the bulk lattice. Thermal desorption/evolution analyses exhibited three distinct peaks, including one from the crystalline bulk. It was previously found that thermal-energy gaseous H(g) atoms penetrate into the Si(100) crystalline bulk within a narrow substrate temperature window(centered at ~460K) and remain trapped in the bulk lattice before evolving out at a temperature as high as ~900K. Developing and sustaining atomic-scale surface roughness, by H-induced silicon etching, is a prerequisite for H absorption and determines the $T_s$ windows. Issues on the H(g) absorption to be further clarified are: (1) the role of the detailed atomic surface structure, together with other experimental conditions, (2) the particular physical lattice sites occupied by, and (3) the chemical nature of, absorbed H(g) atoms. This work has investigated and compared the thermal H(g) atom absorptivity of Si(100), Si(111) and Si(110) samples in detail by using the temperature programmed desorption mass spectrometry (TPD-MS). Due to the differences in the atomic structures of, and in the facility of creating atom-scale etch pits on, Si(100), (100) and (110) surfaces, the H-absorption efficiency was found to be larger in the order of Si(100) > Si(111) > Si(110) with a relative ratio of 1 : 0.22 : 0.045. This intriguing result was interpreted in terms of the atomic-scale surface roughening and kinetic competition among H(g) adsorption, H(a)-by-H(g) abstraction, $SiH_3(a)$-by-H(g) etching, and H(g) penetraion into the crystalline silicon bulk.

  • PDF

연료전지용 개질기 촉매의 피독방지를 위한 천연가스 중의 황성분 부취제의 선택적 흡착제거 (Removal of Odorants by Selective Adsorption from Natural Gas for Protection of Steam Reforming Catalyst in Fuel Cell from Sulfur Poisoning)

  • 오상승;김건중
    • 공업화학
    • /
    • 제18권4호
    • /
    • pp.337-343
    • /
    • 2007
  • 천연가스의 누출을 감지하기 위해서 첨가되는 유기 황 화합물질인 부취제에 의해 연료전지 내의 스택 전극과 개질기 촉매들이 피독되어 시스템 성능저하의 큰 원인이 되고 있다. 본 연구에서는 실리카, 알루미나, 활성탄, HZSM-5, Ultra-stable Y 제올라이트(USY) 및 베타 제올라이트와 같은 흡착제들을 부취제 제거용 흡착제로 사용하여, tetra-hydrothiophene (THT)와 tert-butylmercaptan (TBM)에 대한 흡착 성능을 연속식 흡착시스템에서 얻은 흡착파과곡선을 비교하여 평가하였다. 제올 라이트의 Si/Al 비, 흡착온도 및 Balance Gas (메탄, 헬륨) 종류의 변화가 흡착성능에 미치는 영향을 조사하고, THT와 TBM의 경쟁적인 흡착특성을 비교하였다. 여러 흡착제 중에서 H형, beta-zeolite (BEA)가 부취제인 TBM과 THT에 대해서 가장 우수한 흡착능력을 나타내었으며, 동일한 흡착제 상에서는 THT가 TBM보다 많은 양으로 흡착제거되었다. Temperature Programmed Desorption (TPD) 및 Infrared 스팩트럼(IR) 분석결과 부취제 황화합물은 제올라이트 표면에서 물리흡착과 더불어 산점에 의한 화학흡착을 이루는 것을 확인하였다.

Pd 촉매상에서 일산화탄소 존재 하 수소의 선택적 산화반응: 담체 효과 (Selective Oxidation of Hydrogen Over Palladium Catalysts in the Presence of Carbon Monoxide: Effect of Supports)

  • 김은정;강동창;신채호
    • Korean Chemical Engineering Research
    • /
    • 제55권1호
    • /
    • pp.121-129
    • /
    • 2017
  • $TiO_2$, $Al_2O_3$, $ZrO_2$, $SiO_2$와 같은 다양한 담체에 습식함침법을 이용하여 Pd 기반 촉매를 제조하여 일산화탄소 존재하에 수소의 선택적 산화반응에 적용하였다. 제조된 촉매는 물리화학적 특성을 알아보기 위하여 XRD, $N_2$ 흡착, CO-, (CO+$H_2O$)-TPD, CO-TPR, XPS등의 특성분석을 수행하였다. CO-TPD와 (CO+$H_2O$)-TPD를 통해 $CO_2$ 탈착에 대한 $H_2O$의 영향을 알아보았으며 이러한 TPD 결과는 $H_2/CO$ 전환율과 상관관계가 있음을 확인하였다. 사용된 촉매 중에서 $Pd/ZrO_2$$H_2$ 전환율 측면에서 가장 활성이 좋은 것으로 나타났다. $H_2O$가 첨가된 선택적 $H_2$ 산화반응에서는 $H_2O$, CO, $H_2$가 경쟁흡착을 하였으며, 첨가된 $H_2O$가 CO 및 $H_2$의 반응을 촉진시켰다.

Al-Zr 혼합산화물 촉매의 제조 및 특성분석 (Preparation and Characterization of Al-Zr Mixed Oxide Catalysts)

  • 박정현;윤현기;신채호
    • 청정기술
    • /
    • 제22권1호
    • /
    • pp.9-15
    • /
    • 2016
  • Al/(Al+Zr)의 몰 비를 달리하여 xAl-yZr 산화물 촉매를 공침법으로 제조하였고, 모델반응으로 이소프로판올 탈수반응을 수행하였다. 제조된 촉매는 X-선 회절분석, 시차 열분석법, 질소 흡착법, 암모니아 승온탈착법, 이소프로판올 승온탈착법 등의 특성분석을 수행하였다. 지르코니아에 알루미늄 종을 첨가하면 상대적으로 넓은 비표면적을 갖는 작은 입자를 얻을 수 있으며 지르코니아의 결정상변화를 억제시켰다. 암모니아 승온탈착으로 알루미늄의 몰 비가 증가함에 따라 상대적인 산양이 증가함을 확인하였고, 이소프로판올탈수반응에서 촉매 활성 또한 증가하였다. 이러한 촉매활성은 촉매의 비표면적, 산점, 상대적으로 용이한 이소프로판올의 탈착과 연관시킬 수 있었다.

탈알루미늄화가 SAPO-11 분자체의 구조 및 산성도에 미치는 영향 (The Effect of Dealumination on the Structure and Acidity of SAPO-11 Molecular Sieve)

  • 박종열;이치헌;김수경
    • 대한화학회지
    • /
    • 제40권3호
    • /
    • pp.202-208
    • /
    • 1996
  • 수열법으로 합성한 SAPO-11 분자체를 $H_4$EDTA로써 골격내의 알루미늄을 부분적으로 탈알루미늄화시킬때 24시간 탈알루미늄화까지는 골격이 안전하였으나 48시간 탈알루미늄화에 의해서는 구조가 붕괴되어 variscite($AIPO_4{\cdot}2H_2O$)와 tridymite($SiO_2$)로 변하였다. SAPO-11의 탈알루미늄화로 인하여 3607$cm^{-1}$과 3453$cm^{-1}$에서 하이드록실기에 의한 IR 흡수띠가 각각 관측되었다. 이들 하이드록실기 피크들의 세기는 탈알루미늄화의 정도에 비례하여 증가하였으며 메틸아민의 흡착에 의하여 피크가 사라지는 것으로 보아 이들은 Bronsted 산 자리임을 알 수 있었다. TPD(Temperature-Programmed Desorption) 및 DSC(Differential Scanning Calorimetry) 실험결과 탈알루미늄화된 SAPO-11에 흡착된 메틸아민과 물 분자는 탈알루미늄화가 되지않은 SAPO-11보다 높은 온도에서 그 피크들이 관측되었으며 메틸아민과 물 분자의 탈착 및 탈수 활성화 에너지는 탈알루미늄화의 정도에 비례하여 증가하였다. 이와 같은 현상은 제올라이트 분자체에 있어서와 유사하게 탈알루미늄으로 인하여 SAPO-11 분자체 내에 생성된 구조 하이드록실(srtuctural hydroxyl)기의 Bronsted 산 자리와 흡착 분자간의 보다 강한 상호작용에 기인되는 것으로 생각되었다.

  • PDF

Hydroxide diffusion rates in amorphous solid water

  • Lee, Du Hyeong;Bang, Jaehyeock;Kang, Heon
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.142.1-142.1
    • /
    • 2016
  • We present bulk diffusion rates of hydroxide ions in amorphous solid water (ASW) at 135 ~ 160 K. Previous researches showed that the diffusion mechanism of hydroxide is different from one of hydronium ions, and this implies that they have different diffusion rates. In ultra-high vacuum (UHV) chamber, low-energy scattering (LES) was used to measure ion population and temperature-programmed desorption (TPD) was conducted for measuring ASW thicknesses. To determine the diffusion rates, a simple model for $H_2O/NaOH/H_2O$ sandwich films was developed using Fick's second law. The measured surface population of hydroxide ions as a function of time was well fitted to the model, and the rates were well agreed to an Arrhenius equation.

  • PDF

Catalytic Upgrading of Geodae-Uksae 1 over Mesoporous MCM-48 Catalysts

  • Jeon, Ki-Joon;Jin, Sung Ho;Park, Sung Hoon;Jeon, Jong-Ki;Jung, Sang-Chul;Ryu, Changkook;Park, Young-Kwon
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권7호
    • /
    • pp.1951-1955
    • /
    • 2014
  • Catalytic pyrolysis of Geodae-Uksae 1, a kind of miscanthus found in Korea, was carried out over mesoporous MCM-48 catalysts. For rapid product analysis and catalyst evaluation, pyrolysis-gas chromatography/mass spectrometry was used. X-ray diffraction, nitrogen sorption, pyridine adsorbed Fourier transform infrared, and NH3 temperature programmed desorption were utilized to analyze the properties of the catalysts. Compared to non-catalytic reaction, catalytic upgrading over mesoporous Al-MCM-48 catalysts produced a higher-quality bio-oil with a high stability and low oxygen content. Al-MCM-48 exhibited higher deoxygenation ability than Si-MCM-48 due to its higher acidity.

Surface adsorption and bulk diffusion of hydrogen atoms on ZnO surfaces

  • Roy, Probir Chandra;Doh, Won-Hui;Kim, Chang-Min
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.76-76
    • /
    • 2010
  • The interaction of hydrogen (H) and ZnO surfaces has been investigated using a temperature programmed desorption (TPD) technique. When the surface is exposed to atomic hydrogen below 400 K, hydrogen is adsorbed on the surface. As the hydrogen exposure increases, bulk diffusion of hydrogen takes place. The existence of surface and bulk hydrogen has been confirmed using X-ray photoelectron spectroscopy (XPS). When the ZnO(000-1) surface dosed with hydrogen is heated, surface hydrogen is desorbed at 432 K and bulk hydrogen is evolved at ~539 K. Diffusion of hydrogen into the ZnO bulk is an activated process, and the activation energy is estimated to be 0.19 eV. Diffusion of hydrogen on the ZnO(10-10) surface is also investigated.

  • PDF

Pt(111) 표면에서의 키랄성 분자들의 흡착 특성 연구

  • 정민복;김제헌;조삼근
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.332-332
    • /
    • 2011
  • The adsorption and desoprtion properties on Pt(111) of chiral molecules, propylene oxide (PO) and 1,3-dimethyl butylamine (DMBA), have be characterized in utrahigh vacuum. Precision-doses of PO and DMBA onto a Pt(111) surface at 90 K have been achieved with a directed tubular molecular doser controlled by a micron-sized orifice and the reservoir gas pressure. Temperature-programmed desorption (TPD) mass spectra have been employed together with low-energy electron diffraction (LEED) analyses. In addition to the separate adsorption behaviors of PO and DMBA, the enantioselective adsorption of R- and S-PO on Pt(111) precovered with R- or S-DMBA have been investigated thoroughly, and the results will be presented.

  • PDF