• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.235-242
• /
• 2017

Changes in polarization and thermal expansion coefficients during temperature increase of a poled lead zirconate titanate (PZT) cube specimen switched by an electric field at room temperature are measured. The measured data are analyzed to construct governing differential equations for polarization and strain changes. By solving the differential equations, an experimental formula for the high temperature behavior of ferroelectric materials is obtained. It is found that the predictions by the formula are in good agreement with measures. From the viewpoint of macroscopic remnant state variables, it appears that the processes of electric field-induced switching at different temperatures are identical and independent of temperature between $20^{\circ}C$ and $110^{\circ}C$.

• 한국연소학회지
• /
• 제17권4호
• /
• pp.60-65
• /
• 2012

The MILD combustion and pollutant emission characteristics were investigated computationally. The temperature of supplying air-stream and mixing rate (${\Omega}$) of exhaust gas in the air-stream were adjusted to investigate the effects of those parameters on the MILD combustion in jet flow field. The emission indices for NO (EINO) and CO (EICO) were introduced to quantify the amount of those species emitted from the combustion. The high-temperature region disappeared gradually as the mixing rate increased for fixed air-stream temperature. The EINO increased as the air-stream temperature became higher for fixed mixing rate, and the EINO decreased dramatically with increasing the mixing rate for each air-stream temperature condition. The EICO also decreased with increasing the mixing rate and it was nearly independent of air-stream temperature except for near ${\Omega}$ = 0.7. It was found that the CO supplied in the air-stream can be destroyed in the MILD combustion over the certain mixing rate.

• 태양에너지
• /
• 제7권1호
• /
• pp.30-34
• /
• 1987

Experimental results are discussed concerning temperature effects from $25^{\circ}C$ to $100^{\circ}C$ on amorphous silicon solar cells. N-I-P hydrogenated amorphous silicon solar cells are fabricated on stainless steel and indium tin oxide glass substrates. The open circuit voltage, short circuit current, fill factor and conversion efficiency have been measured under AM1 condition as a function of temperature. The open circuit voltage decreased by $2.6mV/^{\circ}C$ while the short circuit current increases with increased temperature. The conversion efficiency is almost independent of temperature which is contrary to widely using single crystalline solar cells of which efficiencies decrease with increasing temperature.

• Coupled systems mechanics
• /
• 제7권6호
• /
• pp.691-705
• /
• 2018

In this paper, nonlinear displacements of laminated composite beams are investigated under non-uniform temperature rising with temperature dependent physical properties. Total Lagrangian approach is used in conjunction with the Timoshenko beam theory for nonlinear kinematic model. Material properties of the laminated composite beam are temperature dependent. In the solution of the nonlinear problem, incremental displacement-based finite element method is used with Newton-Raphson iteration method. The distinctive feature of this study is nonlinear thermal analysis of Timoshenko Laminated beams full geometric non-linearity and by using finite element method. In this study, the differences between temperature dependent and independent physical properties are investigated for laminated composite beams for nonlinear case. Effects of fiber orientation angles, the stacking sequence of laminates and temperature on the nonlinear displacements are examined and discussed in detail.

• Steel and Composite Structures
• /
• 제38권4호
• /
• pp.355-363
• /
• 2021

The present paper attempts to investigate the propagation of plane waves in an isotropic elastic medium under the effect of initial stress and temperature-dependent properties. The modulus of elasticity is taken as a linear function of the reference temperature. The formulation is applied under the thermoelasticity theory with dual-phase-lag; the normal mode analysis is used to obtain the expressions for the displacement components, the temperature, the stress, and the strain components. Numerical results for the field quantities are given in the physical domain and illustrated graphically. Comparisons are made with the results predicted by different theories (Lord-Shulman theory, the classical coupled theory of thermoelasticity and the dual-phase-lag model) in the absence and presence of the initial stress as well as the case where the modulus of elasticity is independent of temperature.

• 한국환경생태학회지
• /
• 제18권1호
• /
• pp.53-60
• /
• 2004

아파트단지 내부녹지가 온도변화에 미치는 영향을 파악하고자 서울시 서초구, 강남구, 송파구 등 한강 이남지역에 위치한 아파트단지중 36개 지역을 대상으로 연구를 수행하였다. 아파트단지 내부온도는 Landsat ETM＋영상 2scene을 분석하여 추정하였으며 온도변화 영 향요인으로는 토양피복유형과 건물밀도, 식생활력도로 구분하였다. 토양피복유형과 아파트단지내 온도와의 상관관계 분석결과 녹지율은 음(－)의 상관관계를, 불투수포장율은 양(＋)의 상관관계를 보였으며 건폐율은 유의성이 인정되지 않았다. 투수포장지를 녹지면적과 불투수포장면적에 각각 합산한 값과 온도값의 상관관계 분석결과 투수포장면적을 불투수포장면적에 합산하여 산출한 상관계수보다 녹지면적에 합산하는 것이 상관계수가 보다 높게 나타나 투수포장지역도 녹지지역과 함께 도시온도를 낮추는 요소로 작용하는 것으로 판단되었다. 건물밀도의 요소로 선정한 용적율은 온도값과 유의성이 없었으며 NDVl는 값이 높을수록 온도가 낮았다. 아파트단지내 온도분포모형 구축을 위해 투수＋녹지율, 녹지율, 건폐율, NDVI값을 독립변수로, 대상지온도를 종속변수로 한 회귀분석 결과 두 시기 영상 모두 독립변수 중 투수＋녹지율만이 회귀식에 채택되었으며 회귀식의 수정 결정 계수($R^2$)는 각각 41.4(2000년 9월)와 40.4(2001년 6월)이었다.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.147-150
• /
• 2007

Electro-deposition of carbon film on silicon substrate in methanol solution was carried out with various current density, solution temperature and electrode spacing between anode and cathode. The carbon films with smooth surface morphology and high electrical resistance were formed when the distance between electrode was relatively wider. The electrical resistance of the carbon films were independent of both current density and solution temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.388-389
• /
• 2006

Electro-deposition of carbon film on silicon substrate in methanol solution was carried out with various current density, solution temperature and electrode spacing between anode and cathode. The carbon films with smooth surface morphology and high electrical resistance were formed when the distance between electrode was relatively wider. The electrical resistance of the carbon films were independent of both current density and solution temperature.

• 천문학회지
• /
• 제42권3호
• /
• pp.47-54
• /
• 2009

In this paper we present an independent FORTRAN code for calculating LTE-plane-parallel model atmospheres. The transfer equation has been solved using Avrett and Loeser method. It is shown that, using an approximate non-gray temperature distribution together with the iteration factors method (Simonneau and Crivellari) for correcting the temperature distribution reduce the number of iteration required to achieve the condition of radiative equilibrium. Preliminary results for pure helium model atmospheres are presented.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1033-1039
• /
• 1996

Electrical and mechanical properties of polymer sheet at cryogenic temperature have been investigated. Tensile stress(and strain at break) in liquid nitrogen(77K) of 79.7MPa(l.2%) and 117.4MPa(2.05%) are evaluated for films of Polypropylene (PP) and Kapton, respectively. Dielectric loss tangent(tan .delta.) of PP and Kapton films is almost independent of the frequency and tensile stress. Also, field strength of PP film at 77K decreases with increasing the tensile stress.