• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.456-462
• /
• 2014

Infrared(IR) guided heat-seeking missiles uses IR emissions from aircraft to detect and track a target. Due to passive characteristic of the IR guidance, early detection of the missile is difficult and it is significant threat to aircraft survivability. Therefore, IR signature prediction of the aircraft is an important aspect of the stealth technology. In this study, we simulated IR signature of the aircraft in real atmospheric conditions. Aircraft surface temperature distribution was calculated by using RadthermIR code. Based on temperature distribution, IR radiance and BRDF(Bidirectional Reflectance Distribution Function) image were simulated for different weather(seasonal) and background(sky/soil) conditions. The IR contrast tendencies are not aligned with surface temperature or magnitude of target IR radiance. Therefore, it is essential to simulate IR signature with various conditions and background to acquire reliable database.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.183-189
• /
• 2009

Environmental conditions may cause the quality change of fruits during distribution after harvest. In order to prevent the damage or quality change of fruits for distribution, the characteristic of fruits affected by the environmental conditions such as temperature, humidity under various distribution conditions should be known. This research was performed to analyze how the environmental conditions affect the factors such as weight loss rate and ethylene production of the peach under several distribution conditions. Environmental conditions of the actual distributed route were evaluated and the data obtained from the conditions were used for the simulated environmental tests. Regression models of the weight loss rate and the ethylene production of peach were developed and used in predicting peach quality. The weight loss rate of the peach estimated by the ASHRAE data was shown the higher value on the transportation temperature condition than on the low and room temperature conditions. The weight loss rate and the ethylene production of the peach on the simulated distribution conditions were measured and the measured weight loss rate of peach was the smaller than the theoretically estimated one. The regression models of the weight loss rate and the ethylene production were developed respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.669-673
• /
• 2011

This study explores the numerical analysis method of fluid dynamics in the reaction section to improve the gas processing efficiency in the hazardous gas removal by atmospheric thermal plasma. This study also intends to contribute in technology advance to improve the processing efficiency and make the process more stable. Numerical analysis of temperature distribution in the reaction section dependent on the change in flow velocity of Ar and plasma temperature change, which are major control variables in the cracking process of HFC-23 using arc plasma, was done. The characteristic of incoming oxygen by temperature suggested that when temperature increased to 1600K, 1700K, 1800K respectively, the range of cracking temperature 1500K increased to 75.0%, 83.3%, 90.2% respectively. The temperature change of Ar by velocity change was widest in the area higher than 1500K when the velocity was 2.5m/s; however, since there was no big difference when the velocity was 2m/s, it is believed that 2 m/s would be most proper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.145-154
• /
• 2006

Each part of drum brake system is loaded by continual mechanical force and thermal force every time of braking, so enough strength and stability are required. Thermal characteristic is one of the important factors in drum brake systems design. This paper presents the thermal performance such as temperature distribution and thermal contact stress of drum brake system considering several braking patterns; 80th heat braking test mode, heat fade braking test mode, general road mode, steep slope road mode and off road mode. Transient heat transfer analysis and Thermo elastic contact analysis is executed to obtain the temperature distribution, and to evaluate thermal stress of drum brake by using ABAQUS/Standard code. This procedure of analysis can effectively be used to improve the quality problem of brake system and to get design guideline of the new product.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.385-390
• /
• 1999

In this paper, we investigated the wear rate, braking temperature and stopping distance of the composite brake shoe for diesel locomotive in the field test. The wear rate and braking temperature of the composite brake shoe would rather than cast iron. Also, the stopping distance of composite brake shoe is 450m at 100km/h. This result of field test shown that the density distribution of the composite brake shoe influence on wear rate.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.290-291
• /
• 2006

HTS(High Temperature Superconductivity) Power Cable has a different characteristic with conventional distribution line, so installation and operation condition are different. In this paper, internal fault current characteristic s of HTS power cable was analyzed. For this, EMTDC model component of HTS power cable was developed. The developed EMTDC model component is applied to distribution line, then authors analyze internal current characteristics of HTS Power cable when fault occurred.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3208-3216
• /
• 1993

Heat transfer characteristics of the laminar oscillating flow in a circular pipe have been studied under the condition that the wall temperature of the pipe is distributed sinusoidally with the axial direction. The axial velocity was assumed to be uniform in radial direction and the temperature field was analyzed by means of the perturbation method. The results show that the difference between wall and section-time-averaged fluid temperature increases as the oscillating frequency increases and eventually converges to a constant value which is determined by the ratio of swept distance to the characteristic length of wall temperature distribution. Also it is shown that the dominant variable in the heat transfer process when swept distance ratio is greater than 1 is not thermal Womersley number(F) but thermal Womersley number multiplied by the square root of swept distance ratio. The variation of the time-averaged Nusselt number is obtained as a function of F. The results indicate that Nusselt number is proportional to $F_{\epsilon}^{1/2}$ when both of F and .epsilon. are much greater than 1.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.209-216
• /
• 2010

Optical Temperature Distribution Sensor Measurement System uses fiber optic sensors itself for temperature measurement is a system which can be measured the Installed surrounding entire temperature as a thousand points by laying a single strand of fiber optic. If there are a lot of measuring points in the distribution Measurement, the cost of each measuring point can be reduced the cost level of existing sensors and at the same time this has the advantage of connecting all sensors as one or two strands of fiber. Generally Optical Fiber is used for communication but Optical Fiber itself can be used for sensor and it has the characteristic of sensor function which can be measured Temperature in the at least each one meter distance. By using these characteristics each sensor and the number of Connection Lines can be reduced. In this paper, we implement a real time temperature monitoring system, which is easy to manage and control for data storage, data management, data storage using a computer and which has the functions of monitoring and correction according to Real-time temperature changes using historical temperature data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1770-1775
• /
• 2010

An acceleration life test for rubber gasket of pole transformer was performed. The Arrhenius method was applied as an accelerated degradation test. The failure mode was considered as an elongation, and the failure mechanism is counted as a heat. It is found that both the current material(NBR: Nitrile Butadiene Rubber) and recommended alternative material(HNBR: Hydrogenated Nitrile Butadiene Rubber) have the same Weibull distribution as a life characteristic. For life expectation 95% reliability level of characteristic life is used at using temperature. The test results for NBR and HNBR are 7.7 years and 28.0 years on $50^{\circ}C$ of using temperature, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.628-631
• /
• 2001

Current lead is one of the first proposed devices for the application of High Temperature-Superconductor(HTSC). The current lead provides high current for electrical machine using superconductor from room temperature. Its characteristics that is zero resistance and low heat transfer rate under critical temperature lead to research for the replacement of existing current lead with HTSC. In this paper, we investigated the temperature distributions of stacking type and rod type current lead with each cross-section area and length using Nastran program and compared each temperature distribution. It is obtained from this paper that stacking type current lead has flat temperature gradient and than rod type one and more stable operation as current lead is closely related with its cross-section area and length.