• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.2
• /
• pp.59-67
• /
• 1986

To control the amounts of formaldehyde released from the cotton fabric finished with N-methylol compounds, glycerol was used as a formaldehyde-scavenging agent. It was observed the effects of catalysts and curing conditions when aftertreated with glycerol on melamine resin finished fabric. The effects of Different processes of glycerol treatment, and different resins, urea resin and melamine resin, were compared. The conclusions obtained from the results are as follows: 1) It was shown hatt the aftertreatment with glycerol (treated without catalyst) was more effective than treated with catalysts in controlling free formaldehyde. 2) The optimum curing temperature and curing time for the glycerol aftertreatment without adversely affecting the other properties of fabric was about $160^{\circ}C$, 3 min. 3) According to the increase of glycerol concentration in both aftertreatment and simultaneous treatment the amounts of free formaldehyde was reduced. The rate of decrease was manifest within the limits of $6\%$ in the case of simultaneous treatment with glycerol ana resins, and $3\%$ in the case of glycerol aftertreatment on resin finished fabrics. 4) Dry wrinkle recovery angle was decreased the increase of glycerol concentration. Melamine resin had a little adverse effect than urea resin, particulary glycerol aftertreatment. 5) The breaking strength was increased with the increase of glycerol concentration.

• Journal of Powder Materials
• /
• v.10 no.2
• /
• pp.118-122
• /
• 2003

Alpha-SiAlON ceramics having various compositions and modifying cations were investigated with respect to their phase stability, transformation kinetics. and resulting microstructures. Each composition was heat treated at 150$0^{\circ}C$ for 1h and measured the $\alpha$-SiAlON transformation. The phase-boundary composition in the single-phase $\alpha$-SiAlON region showed sluggish transformation from $\alpha$-$Si_3N_4$ to $\alpha$-SiAlON compared to the phase-center composition in the diagram. Using the different rare earth modifying cations, dependence of transformation kinetics on the phase stability in a fixed composition was also explained. By changing size of the stable u-phase region with exchanging cations, systematic change in transformation was observed. Transformation rate of $\alpha$-SiAlON at low temperature has an important role on controlling the final microstructure. Less transformation gives more chances to develop elongated grain in the microstructure.

• Earthquakes and Structures
• /
• v.12 no.5
• /
• pp.515-527
• /
• 2017

Recently, Friction dampers become popular due to the desirable performance in the energy dissipation of lateral loads. A lot of research which has been conducted on these dampers results in developing friction dampers with low sensitivity to the number of cycles and temperature increases. Friction dampers impose high residual drifts to the buildings because of low post-yield stiffness of the damper which results from increasing lateral displacement and period of buildings. This issue can be more critical under strong aftershocks which results in increasing of structural damages. In this paper, in addition to the assessment of aftershock on steel buildings equipped with friction dampers, methods for controlling residual drifts and decreasing the costs of retrofitting are investigated. Utilizing rigid connections as a lateral dual system and activating lateral stiffness of gravity columns by adding elastic braces are as an example of effective methods investigated in this research. The results of nonlinear time history analyses on the low to medium rise steel frames equipped with friction dampers illustrate a rise in residual drifts as the result of aftershocks. In addition, the results show that different slip loads of friction damper can affect the residual drifts. Furthermore, elastic stories in comparison to rigid connections can reduce residual drifts of buildings in an effective fashion, when most slip loads of friction dampers are considered.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.751-755
• /
• 2003

In this paper, We proposed compact multi-layer LTCC (Low Temperature Cofired Ceramic) bandpass filter for Bluetooth module. A ${\lambda}/4$ coupled stripline resonators are designed, which composed of coupled strip-line section and loading capacitance. This resonator with a loading capacitor has slow-wave characteristics. Due to the slow-wave effect of the proposed resonator, it is possible to design and fabricate a compact bandpass filter with a wide upper stop band. Attenuation poles in the lower stop band are achieved using controlling of electro-magnetic coupling between resonators. Using multi-layer LTCC technology, we designed and fabricated band pass filter with a finite attenuation pole and wide upper stopband. The overall size of the filter is $1.2{\times}2.0{\times}1.0mm^3$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.511-517
• /
• 2003

An experiment is conducted to investigate the effect of air and water mass flow rates on cooling characteristics of mist impinging jet on a flat plate. The air mass flow rate ranges from 0.0 to 3.0 g/s, and water mass flow rates from 5.0 to 20.0 g/s. An air-atomizing nozzle is used fur the purpose of controlling air and water mass flow rates. The test section is designed distinctively from previous works to obtain local heat transfer coefficient distributions. Heat transfer characteristics of the mist impinging jet are explained with the aid of flow visualization. Surface temperature and heat transfer coefficient distributions become more uniform as air mass flow rate increases. The water flow rate provides substantial contribution to enhancement of cooling performance. On the other hand, The air mass flow rate weakly influences the averaged heat transfer rate when the water mass flow rate is low, but the averaged heat transfer rate Increases remarkably with the air mass flow rate in case of the high water mass flow rate.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.140-143
• /
• 2001

A study has been made on the recovery of nitric acid and valuable metals such as Cu, Sn, Pb from the spent nitric etching solutions. The nitric acid was extracted effectively by TBP but the heavy metals such as Fe, Cu, Sn, Pb were not extracted by TBP from the spent nitric etching solutions. From the experimental results, 95% of nitric acid in spent etching solution was extracted at O:A ratio of 3:1 with five stage by 60% TBP and 98% of nitric acid was stripped from the loaded organic phase at O:A ratio of 1:1 with four stages by distilled water. After extracting nitric acid, Cu was recovered as a metal by electrowinning effectively and Sn was successfully removed by precipitation method by adjusting the pH of raffinate solution. Finally, Pb was recovered by cementation with iron scrap at $65^{\circ}C$. Parameters controlling the cementation process, such as temperature, pH and the effect of the additives were investigated.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.17 no.3
• /
• pp.8-17
• /
• 2004

Objective: Under recognition of the similarity between carbuncle in Oriental medicine and inflammatory disease, NeiShuHuangLianJang(N.H.) has been used as an antiphlogistic agent. The present reports shows the anti-inflammatory effects of N.H. Method: Experimental animals made use of 4-5 weeks age(weight 20-25g) ICR(male)mouse. They were farmed individually in a temperature($22{\pm}0.5{\circ}$) and light(06:00 to 18:00 h) controlled room with free access to water and food. The N.H.(1.0g／kg, 3.0g／kg) extracted from NeiShuHuangLianTang were administered intragastrically prior to LPS I.P injection. we measured WBC count, IL-6 level in plasma and TNF-${\alpha}$ level in plasma. Result : 1. N.H. suppressed inflammatory reaction induced by LPS. 2. N.H. suppressed WBC count in inflammatory reaction induced by LPS. 3. N.H. suppressed 1L-6 level in inflammatory reaction induced by LPS. According to above experiments, N.H. was improved its suppression effect against the inflammatory reaction through WBC count and IL-6 level. So N.H. which is used for the inflammatory disease(carbuncle) in Oriental Medicine is assumed to have a curative effects against this disease by controlling WBC count and IL-6 level in plasma.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.812-817
• /
• 2004

Recently drastic improvement of railway technology has been accompanied by the construction of very high-speed tracks. It should be noticed that Continuously Welded Rail(CWR) has played significant role in technical development of railway and that installation of CWR is now being scheduled on existing lines as well as newly-built lines. In general, interaction between CWR and bridge deck takes place on bridge section and additional axial force and displacement is to be developed owing to temperature and braking/acceleration forces. This interaction is known to be mainly governed by span organizations and arrangements of foot bearings. In common practice, movable bearing is stationed and designed on the assumption that it is not able to transfer the horizontal force of upper decks. However, it is well known that horizontal resistance is developed in movable bearings due to friction and that friction coefficient of movable bearing is ranged from 0.03 to 0.20 depending on the material of bearings and magnitude of reactions. Therefore, it is easily reasoned out that friction of movable bearing can influence the mutual behavior of CWR and bridge decks. Suggested in this study is to investigate the validity and efficiency of friction effect of movable bearings in controlling the axial force and displacement of CWR on continuous railway bridges.

• Journal of ILASS-Korea
• /
• v.17 no.3
• /
• pp.128-133
• /
• 2012

The present study aims to examine the influence of flame spray distance on the thermal behavior of micro-metal particles and the morphological characteristics of $Ni_{20}Cr$ layers coated on the preheated SCM415 substrates by using the conventional flame spray system. Commercially available nickel-based $Ni_{20}Cr$ particles with a mean diameter of $45{\mu}m$ were used. In addition, CFD simulations using a commercial code (FLUENT ver. 6.3.26) were conducted to estimate temperature and velocity distributions of the continuous and discrete phases before impact on the substrate. From FE-SEM images of coated layers on the substrates, it was observed that as the spray distance decreased, the metal particle morphology showed splash-like patterns and such a short stretch shape, resulting from higher particle momentums and the impact of partially melted particles. Moreover, it was found that the spray distance should be considered as one of important parameters in controlling the porosity and the adhesion strength.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.46-47
• /
• 2006

Ga-doped ZnO nanowires have been synthesized by pulsed laser deposition (PLD) in furnace on gold coated (0001) sapphire substrates. The effect of repetition rate on structural and optical properties of Ga-doped ZnO nanowires are investigated. By controlling repetition rate, the diameter of nanowires is varied between about 60 and 100 nm, and the length of nanowires is varied between about 2 and 4 um. The X-ray diffraction (XRD) reveals the structural defects induced by the Ga doping. The room temperature photoluminescence (PL) spectra of Ga-doped ZnO nanowires show strong UV emission between 382.394 and 385.279 nm with negligible visible emission.