• Title/Summary/Keyword: Temperature condition

검색결과 11,268건 처리시간 0.042초

하수오니에 왕겨 및 톱밥을 혼합한 호기성 퇴비화 (Aerobic Composting of sewage sludge Mixed Rice Hulls and Sawdusts)

  • 정봉수;강용태
    • 한국농공학회지
    • /
    • 제28권3호
    • /
    • pp.99-106
    • /
    • 1986
  • This study was carried out to investigate the effects of moisture content, temperature, C/N ratio and pH of the sewage sludge mixed with hulle and sawdusts for making compost under aerobic condition and to improve the defect of the structure of experimental equipment heat lose and handling method. and obtained results were as follows 1.The temperature was reached 73$^{\circ}$ C around 50 hours fermentation in the condition of 0.8 L/min. of air and 60.4% of moisture content. and favorable moisture content of initial condition ranged from 50 to 65% 2.The temperature near bottom of the batch composter was decreased due to evaporate water vapor and lose the heat produced during aeration. and it is required to be improved. 3.The temperature in the batch composter from the center to the inside wall surface was gradually decreased. the temperatures of the points located in r=9cm and the wall surface were 4$^{\circ}$ C and 6$^{\circ}$ C respectively. and therefore it is required to be insulated. 4. The maximum C02 production was obtained as 7.3% per volume in the temperature of 63$^{\circ}$C at the moisture content of 60% 5.The temperature range of active microbes growth was found to be as 20$^{\circ}$C to 40$^{\circ}$C in the case of mesophiles and 50$^{\circ}$C to 65$^{\circ}$C in the case of thermophiles due to increase and decrease C02 production. 6.C/N ratio after decomposition was 1.3 to 2.6 smaller than that of initial one due to increase the amount of nitrogen. The more C/N ratio increased. the less the reaction velocity decresed. The optimum of it as found to be 30. 7.pH values after decomposition were slightly increased than that of initial ones. The reaction velocity was decreased at acid and alkall condition. Therefore it is neseseary to neutralize the medium to improve the reaction.

  • PDF

직접 접촉식 4단 유동층 열교환기의 압력손실 및 열전달 특성 (The Pressure Drop and Heat Transfer Characteristics of a Direct Contact 4-Stage Fluidized Bed Heat Exchanger)

  • 임동렬;박상일;전광민
    • 대한기계학회논문집
    • /
    • 제16권2호
    • /
    • pp.325-335
    • /
    • 1992
  • In this work, direct contact 4-stage fluidized bed heat exchanger is experimentally studied to develop a new type of heat exchanger which recovers the energy contained in the high temperature waste gas exhausted from the industrial furnaces. A sand is used as a heat transfer medium in this experiment. To determine the optimum operating condition, 11 different perforated plates which have a different free area ratio with different hole diameter are used in the experiment. From the room temperature experiment, the pressure drop which is caused by fluidized bed formation is observed. The high temperature experiment is carried out to seek the optimum operating condition of high heat efficiency at low heat exchanger operation cost. The results of experiment are as following. The pressure drop in the high temperature condition can be predicted from the results of the room temperature experiment. And Nusselt number becomes smaller due to the increased interference between sand particles as Reynolds number increases when the dilute phase fluidized beds are formed in nigh temperature condition. But heat transfer amount through the total sand surface area become larger due to the large resident amount of sand. Considering the heat transfer amount and the heat exchanger operation cost, perforated plates which have either a 30% or 35% of free area ratio with 15mm of hole diameter are best fitted for our goal of this work. The values of .phi. which is a dimensionless number representing the absorption heat amount per unit sand rate are in the range from 0.4 to 0.5, when Reynolds number of waste gas ranges from 25-30 with these perforated plates.

저온연소조건에서 급속압축기를 이용한 n-heptane/n-butanol 혼합연료의 착화지연에 관한 연구 (The investigation on the Ignition Delay of n-heptane/n-butanol Blend Fuel Using a Rapid Compression Machine at Low Temperature Combustion Regime)

  • 송재혁;강기중;;;최경민;김덕줄
    • 한국연소학회지
    • /
    • 제18권2호
    • /
    • pp.32-41
    • /
    • 2013
  • This study presents both experimental and numerical investigation of ignition delay time of n-heptane and n-butanol binary fuel. The $O_2$ concentration in the mixture was set to 9-10% to make high exhaust gas recirculation( EGR) rate condition which leads low NOx and soot emission. Experiments were performed using a rapid compression machine(RCM) at compressed pressure 20bar, several compressed temperature and three equivalence ratios(0.4, 1.0, 1.5). In addition, a numerical study on the ignition delay time was performed using CHEMKIN codes to validate experimental results and predict chemical species in the combustion process. The results showed that the ignition delay time increased with increasing the n-butanol fraction due to a decrease of oxidation of n-heptane at the low temperature. Moreover, all of the binary fuel mixtures showed the combustion characteristics of n-heptane such as cool flame mode at low temperature and negative-temperature-coefficient(NTC) behavior. Due to the effect of high EGR rate condition, the operating region is reduced at lean condition and the ignition delay time sharply increased compared with no EGR condition.

벼 저온발아성의 효율적 검정 조건 (Effective Screening Condition for Low-Temperature Germinability of Rice)

  • 강종래;임상종;김순철;고미석
    • 한국작물학회지
    • /
    • 제40권6호
    • /
    • pp.711-715
    • /
    • 1995
  • 수도 저온발아성이 양호한 품종의 육성을 위한 효율적인 저온발아성 검정 조건을 모삭하기 위해 최근 육성된 신품종과 도입품종을 합하여 50품종을 공시, 1994년 영남농업시험장에서 13 , 16 , 25 에서 20일간 발아시험을 실시한 바, 그 결과를 요약하면 다음과 같다. 1. 13 , 16 , 25 에서 발아시킨 50품종들의 발아율 기초통계량 분석 결과, 13 11일 치상일에서 평균발아율이 43.8%, 발아율의 절위가 92, 그리고 분산이 748로 가장 높아 품종간 저온발아성의 차가 가장 현저한 조건이었다. 2. 13 11일 치상일의 발아율과 평균발아일수, 발아계수와의 상관에서 고도의 상관이 검증되어 13 11일 치상일의 발아율로써 저온발아성을 나타내는 지표로 시용 가능할 것으로 여겨진다. 3. 13 11일 치상일의 발아율을 근거로 공시품종들의 저온발아성을 구분해본 바, 동진벼 등 11품종이 저온발아성이 양호하였고 상주벼 등 17품종이 저온발아성이 매우 불량하였다. 4. 공시품종의 저온발아성과 몇가지 미질관련형질들과의 상관에서 출수 소요일수 및 아밀로스함량은 고도의 정의 유의상관이, 입폭과는 부의 유의상관이 인정되었다.

  • PDF

토양의 온도와 수분이 크리핑 벤트그래스(Agrostis palustris Huds) 생육에 미치는 영향 (Effect of Temperature and Water Content of Soil on Creeping Bentgrass(Agrostis palustris Huds) Growth)

  • 임승현;정준기;김기동;주영규
    • 아시안잔디학회지
    • /
    • 제23권2호
    • /
    • pp.229-240
    • /
    • 2009
  • 여름철 고온 다습한 우리나라 기온에서 토양 온도와 수분은 잔디의 생리학적 변화를 초래하며, 특히 한지형 잔디생육은 우리나라 여름철 기후의 특이성에 많은 영향을 받는다. 본 실험은 크리핑 벤트그래스(Agrostispalustris Huds.)를 이용하여 고온의 조건에서 각기 다른 토양 수분함량 조건에서의 한지형 잔디생육을 관찰하였다. 구체적인 실험 방법으로는 수분함량과 온도에 따른 bentgrass의 생육 및 생리적 스트레스 반응을 평가하였다. 모의 USGA(United State of Golf Association) 그린 조건에서의 토양 온도 및 열 특성 실험 결과 수분이 거의 없는 건조 상태에서의 토양 온도는 $34^{\circ}C$로 발열 했을 때 토양 표면 온도가 $80^{\circ}C$까지 올라가는 것을 알 수 있었다. 반면, 과수분 조건에서 $34^{\circ}C$ 발열을 했을 때에는 건조 조건에 비해 상대적으로 $10^{\circ}C$가 낮은 것을 알 수 있었다. 실험 포장에서의 온도와 수분에 따른 열 특성 변화는 관수시기와 무관하게 처리구 모두에서 관수 후에 열전도도(thermal conductivity), 열 확산성(thermal diffusivity), 및 토양 온도가 증가하였다. 이는 수분이 공기에 비해 상대적으로 높은 열전도도를 갖기 때문으로 사료된다. 또한, 본 실험에서 관수 초기에는 과수분 조건에 비해 수분 결핍 조건에서 토양 온도의 증가를 보였으며, 시간이 지남에 따라 과수분 조건에서 더 높은 토양 온도의 증가를 확인하였다. 즉, 토양 온도는 과수분 조건에서 열전도에 의해 높아져 잔디의 생육에 영향을 미친다. 이는 잔디 표면부 온도가 높은 시각대의 과도한 관수는 여름철 잔디의 생육에 부정적 영향을 미치며, 소나기 등에 의한 일시 침수 시 지반배수의 불량은 잔디 생육에 치명적인 요인이 될 수 있다는 것을 의미한다.

조류(藻類) 및 잡초류(雜草類) 서식형태별(棲息形態別) 담수토양(湛水土壤)의 온도변화 양상(樣相) 연구(硏究) (Changes of Soil and Water Temperature Upon Growth Status of Algae and Weed in Submerged Paddy Soil During Rice Plant Growth)

  • 김리열;이상규;김승환
    • 한국토양비료학회지
    • /
    • 제19권2호
    • /
    • pp.153-156
    • /
    • 1986
  • 수온 및 지온변화에 단독(單獨) 또는 혼합(混合) 서식(棲息)하는 좀개구리밥, 붕어마름 및 조류등(藻類等)이 미치는 영향(影響)을 구명(究明)코자 1/200a 대형무저토관(大型無底土管)에서 조사연구(調査硏究)한 결과(結果)는 다음과 같았다. 1. 담수토양(湛水土壤)의 일중(日中) 최고수온 및 지온은 좀개구리밥 서식지(棲息地)가 무서식지(無棲息地)보다 $1{\sim}3^{\circ}C$정도(程度) 낮았으나 최저수온 및 지온은 같거나 $0.5^{\circ}C$정도(程度) 높았다. 2. 담수토양(湛水土壤)의 천기별(天氣別) 수온 및 지온은 좀개구리밥 서식지(棲息地)가 무서식지(無棲息地)보다 맑은 날은 $0.1{\sim}0.3^{\circ}C$ 낮았으나 구름 강우(降雨) 개임시(時)는 $0.1{\sim}0.4^{\circ}C$정도(程度) 높았다. 3. 조류서식(藻類棲息) 담수토양(湛水土壤)의 수온 및 지온은 무서식지(無棲息地)보다 $0.3{\sim}1.0^{\circ}C$ 높아 조류(藻類)에 의한 보온효과가 認定되었다. 4. 잡초서식(雜草棲息) 형태별(形態別) 수온 및 지온 보존(保存) 효과는 붕어마름 단독서식(單獨棲息)>혼합서식(混合棲息)>분개구리밥 단독서식(單獨棲息)>무서식(無棲息) 순(順)으로 높았다.

  • PDF

뇌파와 심전도 분석을 통한 색채와 색온도가 주거공간에서의 집중도에 미치는 영향 (Effect of Color and Color Temperature on the Attention in the Residential Space by the Analysis of EEG and ECG)

  • 김영중;지두환;류영재;김성현;서상혁;곽승현;강진규;민병찬
    • 산업경영시스템학회지
    • /
    • 제40권1호
    • /
    • pp.124-130
    • /
    • 2017
  • This study is aimed to find out whether there is difference in the physiological change of a human body according to the illumination and color of interior space or not and to specify the effect of the condition of illumination and color, respectively on the attention. In order to do so, White and Green were selected for colors and 4,000k, 5,000k, and 6000k were done for color temperature, and then attention was identified. Examining the results, the more color temperature increased, the more attention improved (P < 0.05), and in the case of EEG, ${\alpha}$ wave decreased while performing the task of attention (P < 0.01), and ${\beta}$ wave decreased more in Green than White in color condition, and it increased more in 4,000k than 5,000k and 6,000k (p < 0.05) in color temperature condition. To sum up, color condition didn't contribute to the attention much, in the case of color temperature, when it is 6,000k, it is judged that it helped to improve attention. It is considered that relaxation contributed to improving attention, as ${\beta}$ wave and sympathetic nerve decreased in 6,000k (p < 0.05). It is judged that the relaxation of tensions which happened due to a beta wave and the reduction of sympathetic nervous system activity in 6,000k, a condition of high color temperature, contributed to the improvement of concentration. In further researches, it is intended that a test will be conducted for the subjects of different ages, and the correlation between color temperature and color stimulation and the influence of them on human body would be observed in subdivided, various test conditions through various color temperature and color stimulation.

WRF-UCM을 활용한 수도권 지역의 열환경 변화 연구: 2000년과 2009년의 비교 (Study on Heat Environment Changes in Seoul Metropolitan Area Using WRF-UCM: A Comparison between 2000 and 2009)

  • 이보라;이대근;남경엽;이영곤;김백조
    • 대기
    • /
    • 제25권3호
    • /
    • pp.483-499
    • /
    • 2015
  • This study examined the impact of change of land-use and meteorological condition due to urbanization on heat environment in Seoul metropolitan area over a decade (2000 and 2009) using Weather Research and Forecasting (WRF)-Urban Canopy Model (UCM). The numerical simulations consist of three sets: meteorological conditions of (1) October 2000 with land-use data in 2000 (base simulation), (2) October 2009 with land-use data in 2000 (meteorological condition change effect) and (3) October 2009 with land-use data in 2009 (both the effects of land-use and meteorological condition change). According to the experiment results, the change of land-use and meteorological condition by urbanization over a decade showed different contribution to the change of heat environment in Seoul metropolitan area. There was about $1^{\circ}C$ increase in near-surface (2 m) temperature over all of the analyzed stations due to meteorological condition change. In stations where the land-use type changed into urban, large temperature increase at nighttime was observed by combined effects of meteorological condition and land-use changes (maximum $4.23^{\circ}C$). Urban heat island (UHI) over $3^{\circ}C$ (temperature difference between Seoul and Okcheon) increased 5.24% due to the meteorological condition change and 26.61% due to the land-use change. That is, land-use change turned out to be contributing to the strengthening of UHI more than the meteorological condition change. Moreover, the land-use change plays a major role in the increase of sensible heat flux and decrease of latent heat flux.

양생온도 변화 및 버블시트 두께변화에 따른 콘크리트의 온도이력특성 (Temperature History of Concrete Corresponding to Various Bubble Sheets Layer and Curing Temperature)

  • 홍석민;백대현;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2008년도 추계 학술논문 발표대회
    • /
    • pp.21-25
    • /
    • 2008
  • In this paper, the temperature history and the strength development of concrete corresponded to various bubble sheets layer and curing temperature. Based on the results, In case of the test temperature of -5℃, concrete subject in the exposure condition, result in a frost damage at initial stage by a fall of below zero temperature. In case of the combination of PE film and non woven fabric was after 36 hour, and combination of bubble sheet over double, a tremendous insulating effect of bubble sheet over double is confirmed due to the temperature of concrete fall of below zero temperature after 60 hours. Meanwhile, regarding the -15℃ of temperature, special measure for insulation curing is necessary to secure stability against early frost damage because frost damage was not affected by the lapping thickness of bubble sheet subjected to severe cold weather condition.

  • PDF

온도 균일도 향상을 위한 대면적 서셉터의 설계 및 성능 시험 (Design and Performance Test of Large-Area Susceptor for the Improvement of Temperature Uniformity)

  • 양학진;김성근;조중근
    • 한국산학기술학회논문지
    • /
    • 제16권6호
    • /
    • pp.3714-3721
    • /
    • 2015
  • 서셉터 히터에서 쉬스 열선을 사용하는 방법이 일반화되어 있지만, 대면적 초고온 조건에서는 서셉터의 온도 균일도 성능 저하의 문제가 있다. 본 연구에서는 온도균일도 성능을 향상시킬 수 있도록 판형 형태의 열선을 기본으로 새로운 서셉터를 설계하여 프로토타입을 개발하였다. 표면 온도 $450^{\circ}C$의 고온에서 1.4% 이내로 온도 균일도가 시제작된 서셉터에서 검증될 수 있었다. 또한 온도 학습 데이터를 이용하여 측정 온도 데이터를 예측할 수 있는 커널 회귀 알고리즘을 개발하고, 이러한 예측 데이터와 측정 데이터의 비교 분석으로 균일도 측정 온도의 신뢰성을 확인할 수 있었다.