• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.32-40
• /
• 2016

The characteristics of an optical system vary depending on wavelength and ambient temperature. Based on the thin-lens approximation, we investigate the conditions for stabilizing an optical system against wavelength and temperature variations at the same time. The conditions are applied to designing a laser scanning system consisting of two lenses. The change in the effective focal length of the scanning system against wavelength and temperature variations is very small, as expected.

• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.343-348
• /
• 2009

$NiO{\cdot}(Co_{0.25}Mn_{0.75})_2O_3$(Mn-Ni-Co) and $Ba_{0.5}Sr_{0.5}TiO_3$(BST) thick films were screen printed on Pt patterned alumina substrate to investigate the effects of sintering temperature on humidity and temperature sensing properties of ceramic sensors. A raise in sintering temperature increased resistance and B constant of the Mn-Ni-Co temperature sensor. This may have derived from the synergic effects of the reduction in charge carriers caused by the substitution of Co for Mn as well as the formation of microcracks from the difference in thermal expansion coefficients. Dependence of resistance on humidity of the Mn-Ni-Co temperature sensor, however, was not found. BST films sintered at temperatures in the range of $1100^{\circ}C$ to $1150^{\circ}C$ showed excellent humidity sensing properties. The BST humidity sensor was faster in its response than the Mn-Ni-Co temperature sensor. The humidity sensor, however, proved to be unstable under various temperatures, suggesting a need for a temperature stabilizing device. In contrast, the Mn-Ni-Co temperature sensor was stable under humid conditions.

• Transactions of Materials Processing
• /
• v.18 no.2
• /
• pp.107-111
• /
• 2009

Temperature variation happens in micro prism roll mold processing system during machining the prism pattern roll mold using manufacturing optical films of LCD (liquid crystal display). This temperature variation induces pitch errors of the prism patterns. The temperature variation displaces the positions of the diamond cutting tool on the roll which was coated by the copper. In order to prevent the pitch errors, the stabilizing the temperature of machining environment is needed. Therefore, the researching on the temperature variation of the ultra-precision roll mold processing system on the machining of micro prism rot 1 mold is needed. In this paper, the temperature variation of micro prism roll mold processing system is researched, the influence is analyzed, and the study for reducing the pitch errors carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.872-877
• /
• 1991

This paper presents the composite control method using fuzzy and neural network theory. Fuzzy theory is applied to make control rules and neural net is used to learn them and to generate proper control signals. The electric furnace is controlled to maintain the desired temperature and to minimize the fluctuation of the temperatures in various locations inside the furnace. This controller consists of three neural nets which deal with the average of the temperatures, variances of them and the temperature stabilizing mechanism. Experiments are performed with the target temperatures of 70.deg. C and 80.deg. C. Test results show that this simple method is very effective.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.265-271
• /
• 2003

This study is for the stable optical source in order to get the precision measurement, which contributes to help the laser frequency and the output to be settled. The laser optical frequency is changed by the length of resonance cavity. The length variation of the laser resonance amplitude is affected by the thermal expansion of that system. So, we try not only to adjust the temperature of the laser tube using the heater for fine length of resonance cavity, but also to maintain the fixed temperature of the resonance cavity for outputting the safe laser optical frequency. Therefore, we must take materials with the thermal expansion of the supporting system, which is closer to it of the laser resonance cavity. Using the materials, we can promote to stabilize the temperature of it. In advance, we also plan to get the settlement of the laser frequency and the output in the long km, optimizing and stabilizing the system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.65-66
• /
• 2023

This study is aimed to understand the effect of pyrolysis temperature on the biochar synthesis for shape stabilizing the Lauric acid (LA). Three different temperatures (350, 500, and 650 ℃) have been chosen with a soaking time of 1h for synthesizing biochars form sesame plants (SP). The structural characterizations indicate the formation of amorphous biochar at 350 ℃ whereas, a stain of graphene formation has been observed for the biochar synthesized at 500 ℃. Formation of a substantial amount of graphene has been found for the sample, synthesized at 650 ℃. Energy storage performances of the PCMs which are shape stabilized by these three biochars have been discussed in this paper.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.11
• /
• pp.3666-3675
• /
• 1996

A new hardware temperature compensation method for hot-wire anemometer is investigated and an analog compensating circuit is proposed in this article. A photoconductive cell is introduced here as a variable resistor in the anemometer bridge and the linearized output of a thermistor is used to monitor the input of the photoconductive cell. In contrast with the conventional method, any type of temperature sensor can be used for compensation if once the output of thermometer varies linearly with temperature. So the present technique can diversify the compensating means from a conventional passive compensating resistance to currently available thermometers. Because the resistance of a photoconductive cell can be set precisely by adopting a stabilizing circuit whose operation is based on the integration function of the operational amplifier, the accuracy of compensation can be enhanced. As an example of linearized thermometer, thermistor sensor whose output is linearized by a series resistor was used to monitor the fluid temperature variation. Validation experiment is conducted in the temperature ranged from 30 deg. C to 60 deg. C and the velocity up to 40 m/s. It is found that the present technique can be adopted as a compensating circuit for anemometer and hot-wire type airflow meter.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.6
• /
• pp.1723-1727
• /
• 2004

We investigated the activity and stability of alcohol dehydrogenase from horse liver (HLADH) under the electric stimulation. The activity and stability of alcohol dehydrogenase depended on electric output voltaqe, stimulation time, pulse duration and pulse interval, and temperature. HLADH retained about 23% of its activity in buffer but 78% in 10% trehalose solution under electric stimulation with 10V, 10min, The stabilizing of enzymes against electric stimulation by stabilizing additives showed a great potential use of enzymes in biotechnology and medical engineering fields.

• Korean journal of food and cookery science
• /
• v.32 no.3
• /
• pp.325-332
• /
• 2016

Purpose: The purpose of this study was to investigate the stability of anthocyanin pigment extract from Yangha (Zingiber mioga ROSC). Methods: Yangha extract was investigated for the effects of metal ion, temperature, light, heating time, sugars, and organic acids on the stability of anthocyanin pigments. Results: Yangha pigment was more stable than other anthocyanin pigments at unstable temperatures. The stability of anthocyanin pigment significantly decreased one day after exposure to light. All tested sugars decreased the abundance of Yangha pigments, with highest levels in the presence of sucrose, and progressive decrease in the presence of maltose, fructose, glucose and galactose, in order. Among the organic acids tested, citric acid and malic acid were the most effective in stabilizing the Yangha pigment, followed by acetic acid and formic acid. Most metal ions except $Fe^{2+}$ were effective in stabilizing the pigment. Conclusion: These results provide useful reference data for the use of pigments from Yangha in processed foods.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.33-39
• /
• 2006

Trichromatic LED backlight renders higher colour gamut and panel transmittance to the LCDs than the phosphor-converted white LED backlight. In realization, however, several technical challenges arise, such as colour shift, due to the ambient temperature change, brightness decrease along with the temperature increase, colour mixing, minimizing the total number of chips and so on. In this paper we designed and tested the low cost temperature compensating circuit, using a thermistor as a temperature compensating element, for stabilizing the brightness and maintaining the colour coordinates of the trichromatic backlight units. By applying the temperature compensating circuit, the decrement rate of the brightness and colour shift rate were achieved by 54% and 51% respectively comparing with uncompensated case.