• Corrosion Science and Technology
• /
• v.4 no.6
• /
• pp.217-221
• /
• 2005

In the present investigation, holographic interferometry was utilized for the first time to monitor in situ the thickness of the oxide film of aluminium samples during anodization processes in boric acid solutions. The anodization process (oxidation) of the aluminium samples was carried out by the technique of the electrochemical impedance spectroscopy(EIS), in different concentrations of boric acid (0.5-5.0% $H_3BO_3$) at room temperature. In the mean time, the real-time holographic interferometry was used to measure the thickness of anodized (oxide) film of the aluminium samples in solutions. Consequently, holographic interferometry is found very useful for surface finish industries especially for monitoring the early stage of anodization processes of metals, in which the thickness of the anodized film of the aluminium samples can be determined without any physical contact. In addition, measurements of electrochemical values such as the alternating current (A.C) impedance(Z), the double layer capacitance($C_{dl}$), and the polarization resistance(Rp) of anodized films of aluminium samples in boric acid solutions were made by the electrochemical impedance spectroscopy(EIS). Attempts to measure electrochemical values of Z, Cdl, and Rp were not possible by holographic interferometry in boric acid especially in low concentrations of the acid. This is because of the high rate of evolutions of interferometric fringes during the anodization process of the aluminium samples in boric acid, which made measurements of Z, Cdl, and Rp are difficult.

• Publications of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.35-45
• /
• 1997

SOFT($\underline{So}lar\;\underline{F}lare\;\underline{T}elescope$) installed at BOAO(Bohyunsan Optical Astronomy Observatory) is purposed for observing solar active regions using four refractors on single mount with a $400"\times300"$ field of view: Two refractors with a diameter of 15cm(f15) are observe the white light and $H\alpha$, and the other two refractors with a diameter of 20cm(f8) are observe the magnetic field distribution and Doppler shifts at the solar chromosphere. Three Lyot filters, one of the most important observational instruments, are installed on the optical rails for VMG, LMG, and $H\alpha$ that possible to very narrow pass band observation under high precision stability of temperature. From the combination of KD*P and quarter wave plate in the Lyot filter possible observe the magnetic fields strength and doppler shifts by using the characteristics of polarization components. In this paper, we introduce the basic characteristics, optical system, and monitor system of the SOFT.

• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.219-222
• /
• 2010

An ubiquitous sensor network (USN) system to monitor the bio information and the emergency of the elderly in the silver town is presented. The USN system consists of the sensor node platforms based on MCU of Atmage128L and RF Chip of CC2420 satisfying IEEE 802.15.4, which includes the bios sensor module such as the electrocardiogram (ECG) sensor and the temperature sensor. Additionally, when an emergency of the elderly is occurred in the silver town, the routing algorithm suitable to find and inform the location of the elderly is proposed, and the proposed routing algorithm is applied to the USN. To collect and manage the ECG data at the PC connected to the sink node, LabView software is used. The bio information and the emergency of the elderly can also be monitored at the client PC by TCP/IP networks in the USN system.

• Atmosphere
• /
• v.14 no.1
• /
• pp.4-23
• /
• 2004

To monitor the world's oceans and understand the role of the oceans for climate change, an Array for Real-time Geostrophic Oceanography (ARGO) program has been carried out since year 2000. Autonomous profiling floats of about 820 are reporting the vertical temperature, salinity, and pressure profiles of the upper 2000 m underwater at regular time intervals. Meteorological Research Institute (METRI) of Korea Meteorological Administration (KMA) launched 45 floats at the East Sea and the western Pacific to understand characteristics of water properties and develop the global ocean observation system as a part of international cooperation project. In this study, we introduce ARGO program, METRI-ARGO and the features of APEX float itself and their data formats. We also describe the significant points to be considered for using ARGO data.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.8
• /
• pp.239-244
• /
• 2015

WebCL was proposed for high complex computing in Javascript. Since WebCL-based applications are distributed and executed on an unspecified number of general clients, it is important to profile their performances on different clients. Several profilers have been introduced to support various programming languages but WebCL profiler has not been developed yet. In this paper, we present a WebCL profiler to evaluate WebCL-based applications and monitor the status of GPU on which they run. This profiler helps developers know the execution time of applications, memory read/write time, GPU statues such as its power consumption, temperature, and clock speed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.156-162
• /
• 2020

Wireless Sensor Network (WSN) field is mainly studied to monitor and characterize large-scale physical environments to track various environmental or physical conditions, such as temperature, pressure, wind speed and humidity. WSN can be used in various applications such as wild surveillance, military target tracking and monitoring, dangerous environmental exploration and natural disaster relief. We design probabilistic mobile models that apply to mobile ad hoc network mobile environments. A probabilistic shift model proposed by dividing the number of moving nodes and the distance of travel into two categories to express node movement characteristics. The proposed model of movement through simulation was compared with the existing random movement model, ensuring that the width and variation rate of the first node node node node (FND) was stable regardless of the node movement rate. In addition, when the proposed mobile model is applied to the routing protocol, the superiority of network life can be verified from measured FND values. We overcame the limitations of the existing random movement model, showing excellent characteristics in terms of energy efficiency and stable in terms of changes in node movement.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.416-424
• /
• 2004

In this paper, the heat transfer analysis and thermal stress analysis of the PCB(Printed Circuit Board) equipped in electronic Packages are carried out for various may types of chips on the PCB. And two structural PCB models are used in the analyses. The electronic chips on the PCB usually emit heat and this heat generates the thermal stress around the chip. The thermal load due to the heat generation of chips on the PCB may cause the malfunction of the electronic packages such as a monitor. a computer etc. Hence, the PCB should be designed to withstand these thermal loads. In this paper, the heat transfer analysis and thermal stress analysis are executed for the PCB model with pins and the analysis results are compared with the results for the PCB model without pins. The analysis results show that the PCB model without pins is not good for the thermal stress analysis of PCB, even though these two models have similar heat transfer characteristics. The analysis results also show that the highest thermal stress occurs in the pin especially attached to the highest temperature chip, and the PCB constrained to the electronic package on the long side is structurally more stable than other cases. The analyses of the PCB are executed using the finite element analysis code, NISA.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.974-980
• /
• 1998

This study is concerned with the production of carbon fiber reinforced carbon(C/C) with polyaromatic mesophase pitch as matrix precursor and with the investigation of friction-wear characteristics in ambient air using a constant speed type of friction tester. The main problem in using the polyaromatic mesophase as the matrix precursor is the high viscosity which may limit the complete impregnation of the fiber preform in the vacuum. To solve these problems two dimensional carbon fiber fabrics were infiltrated with meso-phase pitch in the pitch impregnator. After the impregnation and the heat treatment process. C/C com-posites were characterized by density porosity to monitor the influence of high pressure and temperature. It showed that the bulk density was increased and the apparent porosity and the density increasing rate was reduced as repeating the impregnation the carbonization and the heat treatment. The friction-wear charac-teristics of C/C composites were investigated by measuring the average friction coefficient and the specific wear rate as functions friction speed and friction pressure using a constant speed type of friction tester. C/C composite4s showed the average friction coefficient to be reduced as increasing the friction speed and the friction pressure.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.13 no.2
• /
• pp.85-95
• /
• 2007

Purpose: The purpose of this study was to investigate the prevalence and affecting factors of work-related musculoskeletal disorder (WRMSD) among the directory assistance operators. Methods: One hundred eighty-five female subjects who worked more than one year as directory assistance operators in a telecommunication company were surveyed with self-administered questionnaires. Subjects were divided into disorder and control group by the NIOSH criterion about WRMSD, and then analyzed. Results: One hundred seventy two subjects (93%) had upper extremity symptoms and seventy subjects (37.8%) were WRMSD. the frequency order of the disorder area was the shoulder 60(32.4%), the neck 37(20.0%), the wrist 20(10.8%), the finger 20(10.8%) and the elbow 5(2.7%). It was found that the difference factors of the WRMSD group were education level (p<0.01), stress from the customers (p<0.01), satisfaction about monitor (p<0.05), temperature (p<0.05), noise (p<0.01), ventilation (p<0.001), working time (p<0.05), and recess (p<0.001). Conclusion: Improving working condition and education for the workers to control the stress are necessary to decrease the WRMSD for the directory assistance operators.

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.142-149
• /
• 2007

Wireless sensor network technology is an emerging technology consisting of small, low power, and low cost devices that integrate limited computation, sensing, and radio communication capabilities. An ad-hoc home network system based embedded system for home environment monitoring was fabricated and tested. The wireless sensor node consists of a MCU, RF transceiver and sensors (temperature, humidity and light). Wireless sensor nodes run application software for data sampling and wireless communication, that was developed using 'nesC language' which runs on TinyOS. In our tests, acquired sensors data were monitored on 6.4" TFT-LCD of base-station through IEEE802.15.4 standard wireless communication. Also, the sensor data can be monitored by client user at the terminal PC to monitor environmental status of home in real time.