• 한국광학회지
• /
• 제10권4호
• /
• pp.273-278
• /
• 1999

광섬유 Fabry-Perot 간섭계를 센서로 하는 TDM 다중화 광섬유 압력/온도 센서시스템을 개발하고, 이 시스템을 이용하여 수위와 온도 측정실험을 행하였다. 측정시스템의 측정속도는 측정데이타를 저장하지 않는 경우 최대 초당 4500회이며, 센서의 응답속도는 ~1 ms로 추정된다. 압력센서와 온도센서의 특성은 이론적 추정치와 비교하여 각각 +13.7%,-18%의 차이를 보였으며, 반복실험을 통하여 선형화한 후의 선형화 오차는 1%이내, 온도의 변화가 $<0.1>^{\circ}C$이내 일 때 수위측정의 오차는 $\pm$0.3cm이며, 수위측정에 대한 시스템 잡음은 측정하지 않았다. 온도센서의 시스템 잡음은 0.1$^{\circ}C$이내였으며, 이 시스템을 이용하여 수위 및 온도 변화량에 대한 고속 측정실험을 수행할 결과 예상된 결과를 얻을 수 있었다.

• 센서학회지
• /
• 제18권6호
• /
• pp.467-474
• /
• 2009

In this study, we describe the feasibility of developing a fiber-optic temperature sensor using a thermochromic material such as 2,4,5-triphenylimidazole or also called Lophine. A sensor-tip is fabricated by mixing of a Lophine powder, which has a non-toxic and hydrophobic characteristics, and an epoxy resin. The temperature change in the sensor-tip gives rise to a change in the optical absorbance of the Lophine, and the transmittance of a light through the Lophine is also changed. We have measured the intensities of modulated lights due to the change of optical absorbance of the Lophine by using of a photo-multiplier tube(PMT). The relationships between the temperatures and the output voltages of PMT are determined to measure the temperature of water. The measurable temperature range of the fiber-optic sensor is from 5 to $30^{\circ}C$.

• 한국가시화정보학회지
• /
• 제7권2호
• /
• pp.17-21
• /
• 2010

This paper presents the fabrication and performance measurement of a temperature sensor array on a flexible substrate attachable to a curved surface using MEMS technology. Specifically, the fabrication uses the well-developed printed circuit board fabrication technology for complex electrode definition. The temperature sensor array are lifted off with a $10{\times}10$ matrix in a $50\;mm{\times}50\;mm$ to visualize temperature distribution. Copper is used as temperature sensing material to measure the change in resistances with temperature increase. In a thermal oven with temperature control, the temperature sensor array is Characterized. The constant slope of resistance change is obtained and temperature distribution is measured from the relationship between resistance and temperature.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.169-172
• /
• 1998

A phyaical model of the Czochralski method for silicon single crystals is designed to measure the change of velocities and temperature profilles in the melt. Wood's metal(Bi 50%, Pb 26.7%, Sn 13.3%, Cd 10%, m.p. 70℃) is used to simulate the silicon melt in the crucible. To measure the local velocity change, electromagnetic probe is adopted as a velocity sensor. The output voltage of the sensor shows linear relationship to the velocity of the melt.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.218-221
• /
• 2009

This paper reports on measurement method for the fiber optic strain monitoring of overhead contact line systems of trains, We used FBG (Fiber Bragg Grating) sensors to measure the strain variation of overhead contact line. FBG sensors can sensitively measure the variation of strain and! or temperature by the shift wavelength of reflected wave according to the lattice variation during the measurement. FBG sensor were attached on the contact line and connected to the monitoring system with optical fibers. The monitering system with FBG sensors showed very good sensitivity to measuring strain variation and this system could be applied to the overhead contact line of KTX (Korea Train eXpress).

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1059-1065
• /
• 2020

Demand for pressure sensors is increasing in various fields such as machinery, healthcare and medical care. A recent study is being conducted to create sensors that are more sensitive and have longer linear sections based on measurement principles. In this paper, a film-type sensor with a membrane structure was developed to measure the pressure distributed in the axial direction of a hot roll laminator. Performance of sensors was evaluated by resistance and durability according to membrane diameter. The resistance of the membrane sensor varies according to the contact state and contact area of the electrode. Therefore, the membrane diameter selection is important. Experiments showed the most pronounced variation in resistance under pressure at 8 mm in diameter of membrane. Reliability evaluation of sensors was carried out at room temperature and high temperature. The pressure on the sensor was pressurized 1000 times to measure the initial resistance and the resistance after the evaluation to analyze the change. Sensors showed stable results with low resistance changes of 5.15% and 6.27%, respectively. A large area sensor manufactured using the developed sensor also showed reliable results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.324-326
• /
• 1997

Low power ZnO-Si gas sensor below 500 mW at operating temperature has been fabricated by using micromachining technique. I-V measurement shows the power consumption of 260 mW at $400^{\circ}C$ The sensitivity of the sensor was 45 percent at operating temperature of $350^{\circ}C$(230 mW) with 1,000 ppm CO gas atmosphere. The response and the recovery time found out to be 94 sec and 180 sec, respectively, when CO gas was used. In order to measure the exact temperature of the gas sensing layer, Pt/Cr bilayer-RTD was used in this experiment.

• 한국전자파학회논문지
• /
• 제10권7호
• /
• pp.1111-1117
• /
• 1999

EED 내부의 화약을 제거하고 광섬유센서를 발열선에 근접 설치하면 EED의 발열선 온도를 정확하게 측정 할 수 있다 .. EED의 발열 선과 광섬유 센서간의 이격할 수 있는 최적거리 계산을 열전달 이론에 근거하여 구 하였고. 발열선의 온도-이격거리 관계식을 도출하였다. 연구결과는 외부 전자파환경에 의해서 유기된 전류로 인해 발생되는 발열선의 온도를 측정하는 전자파방사 위해도 시험에 활용할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.477-477
• /
• 2000

A multifunctional sensor is designed to measure viscosity, cleanness, temperature and capacitance of engine oil to make a clear decision on its condition. The simple structure helps easy fabrication and low cost while measuring four parameters by one sensor. The operation is described theoretically and is supported by experimental data. A fuzzy based algorithm to fuse the four kinds of data from multi-functional sensor in order to make a decision on the best time to change the oil is proposed.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.159-163
• /
• 2019

최근 생활수준의 향상으로 외식문화가 발전하고 있고 온라인과 오프라인으로도 냉동식품의 택배수요가 날로 증가하고 있다. 현재 이러한 식품유통의 대부분은 냉동차량에 의해서 이루어지고 있다. 냉동차량에서 가장 중요한 요소 중에 하나는 정확히 온도를 측정하는 것이다. 기존의 상용 온도 기록 시스템은 일반적으로 온도 센서 모듈을 기록계에 직접 연결하는 형태이다. 이러한 기존의 방법은 전선을 사용하여 기록계에 온도 데이터를 전송하기 때문에 케이블의 길이에 따라 저항 오차를 보상해야한다. 본 논문은 케이블 내의 저항으로 인해 발생하는 오차를 극복하기 위해서 디지털 처리와 CAN (Controller Area Network) 통신을 사용하는 것을 제안한다. 또한 온도 측정의 정확도를 높이기 위해서 백금 센서인 PT-1000을 사용한다.