• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.833-836
• /
• 2000

The mechanical and thermal load. and thermal softening which is happened by the high temperature of die, in hot and warm forging, cause wear. heat checking and plastic deformation, etc. This study is for the effects of solid lubricants and surface treatments for warm forging die Because cooling effect and low friction are essential to the long lift of dies. optimal surface treatments and lubricants are very important to hot and warm forging Process. The heat that is generated by repeated forging processes. and its transfer are important factors to affect die life. The main factors, which affect die hardness and heat transfer, are surface treatments and lubricants, which are related to thermal diffusion coefficient and heat transfer coefficient, etc. For verifying these. experiments art performed for diffusion coefficient and heat transfer coefficient in various conditions - different initial billet temperatures and different loads. Carbonitriding and ionitriding are used as surface treatments. and oil- base and water-base graphite lubrirants are used. The effects of lubricant and surface treatment for warm forging die lift are explained by their thermal characteristics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.430.1-430.1
• /
• 2014

According to advanced nanotechnology in the field of biomedical engineering, many studies of the interaction between topography of surfaces and cellular responses have been focused on nanostructure. In order to investigate this interaction, it is essential to make well-controlled nanostructures. Electron beam lithography (EBL) have been considered the most typical processes to fabricate and control nano-scale patterns. In this work, $TiO_2$ nanowire array was fabricated with hybrid process (top-down and bottom-up processes). Nanodot arrays were patterned on the substrate by EBL process (top-down). In order to control the spacing between nanodots, we optimized the EBL process using Poly(methyl methacrylate) (PMMA) as an electron beam resist. Metal lift-off was used to transfer the spacing-controlled nanodots as a seed pattern of $TiO_2$ nanowire array. Au or Sn nanodots which play an important role for catalyst using Vapor-Liquid-Solid (VLS) method were patterned on the substrate through the lift-off process. Then, the sample was placed in the tube furnace and heated at the synthesis temperature. After heat treatment, $TiO_2$ nanowire array was fabricated from the nanodots through VLS method (bottom-up). These results of spacing-controlled nanowire arrays will be used to study the interaction between nanostructures and cellular responses in our next steps.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.21-26
• /
• 2021

Single-layer graphene is grown directly on Ti-buffered SiO2 at 100℃. As a result of the AFM measurement of the Ti buffer layer, the roughness of approximately 0.2 nm has been improved. Moreover, the Raman measurement of graphene grown on it shows that the D/G intensity ratio is extremely small, approximately 0.01, and there are no defects. In addition, the 2D/G intensity ratio had a value of approximately 2.1 for single-layer graphene. The sheet resistance is also 89 Ω/□, demonstrating excellent characteristics. The problem was solved by using graphene and a lift-off patterning method. Low-temperature direct-grown graphene does not deteriorate after the patterning process and can be used for device and micro-patterning research.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1117-1125
• /
• 2023

The DC part of the DC microgrid power conversion system uses capacitors for buffers of charge and discharge energy for smoothing voltage and plays important roles such as high frequency component absorption, power balancing, and voltage ripple reduction. The capacitor uses an aluminum electrolytic capacitor, which has advantages of capacity, low price, and relatively fast charging/discharging characteristics. Aluminum electrolytic capacitors(AEC) have previous advantages, but over time, the capacity of the capacitors decreases due to deterioration and an increase in internal temperature, resulting in a decrease in use efficiency or an accident such as steam extraction due to electrolyte evaporation. It is necessary to take measures to prevent accidents because the failure diagnosis and detection of such capacitors are a very important part of the long-term operation, safety of use, and reliability of the power conversion system because the failure of the capacitor leads to not only a single problem but also a short circuit accident of the power conversion system.

• 센서학회지
• /
• 제7권1호
• /
• pp.45-50
• /
• 1998

마그네트론 코스퍼터링법으로 측온저항체 온도센서용 Pt-Co 합금박막을 $Al_{2}O_{3}$ 기판위에 증착시켰다. Lift-off 방법을 이용하여 $Al_{2}O_{3}$ 기판위에 Pt-Co 합금박막 저항체를 만들었으며, 인가전력, 진공도, 열처리 온도 및 신간에 따른 합금박막의 물리적, 전기적 특성을 조사하였다. 열처리 온도, 시간이 증가할수록 박막의 비저항 및 면저항이 감소하였다. 인가전력 Pt : $4.4 W/cm^{2}$, Co : $6.91\;W/cm^{2}$, 진공도 10 mTorr, $800^{\circ}C$, 60분간 열처리를 행한 Pt-Co 합금박막의 비저항 및 면저항은 각각 $15{\mu}{\Omega}{\cdot}cm$, $0.5{\Omega}/{\square}$이었다. 그리고 $25{\sim}600^{\circ}C$의 온도범위에서 $3000{\AA}$ 두께를 가지는 Pt-Co 합금박막의 저항온도계수는 $3740ppm/^{\circ}C$로 측정되었다. 이러한 결과로 Pt-Co 합금 박막은 측온저항체 온도센서로서의 가능성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1349-1351
• /
• 1998

Platinum-Cobalt alloy thin films were deposited on $Al_2O_3$ substrates by r.f. cosputtering for RTD temperature sensors. We made Pt-Co alloy resistance patterns on the $Al_2O_3$ substrates by lift-off method and investigated the physical and electrical characteristics of these films under various conditions (the input power, working vacuum, annealing temperature, thickness of thin films) and also after annealing these films. At input power of Pt : $4.4 W/cm^2$. Co:6.91W/$cm^2$. working vacuum of 10 mTorr and annealing conditions of $1000^{\circ}C$ and 60 min, the resistivity and sheet resistivity of Pt-Co thin films was $15{\mu}{\Omega}{\cdot}cm$ and $0.5{\Omega}/{\square}$, respectively. The TCR value of Pt-Co alloy thin films was measured with various thickness of thin films and annealing conditions. The optimum TCR value is gained under conditions $3000{\AA}$ of thin films thickness and $1000^{\circ}C$ of annealing temperature. These results indicate that Pt-Co alloy thin films have potentiality for the high resolution RTD temperature sensors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1485-1487
• /
• 1997

Platinum-Cobalt alloy thin films were deposited on $Al_2O_3$ substrates by co sputtering for RTD temperature sensors. We made Pt-Co alloy resistance patterns on $Al_2O_3$ substrate by lift-off method and investigated the physical and electrical characteristics of these films under sputtering conditions (; the input power, working vacuum), annealing conditions (; temperature, time) and also after annealing these films. After the annealing treatment at $800^{\circ}C$ for 60min, the resistivity and sheet resistivity of Pt-Co thin films was $0.0302{\mu}{\Omega}{\cdot}cm$ and $0.1{\Omega}/{\square}$, respectively, and the TCR value of Pt-Co RTD was $3600ppm/^{\circ}C$ in the temperature range of $25{\sim}400^{\circ}C$. These results indicate that Pt-Co thin films have potential for the excellent RTD temperature sensors.

• 한국임상수의학회지
• /
• 제15권2호
• /
• pp.399-403
• /
• 1998

To clarify the anesthetic effect of acupoint injection(aquapupuncture) using general anasthetics in dogs, 18 mongrel dogs were divided into control and two experimental groups(Tian-ping+Bai-hui : Tian-ping group and San-yang-luo+Gong-sun group : San -yang- lux group). Control group was intramuscularly injected with ketamine hydrochloride, 22 mg/ kg of body weight into the thigh and experimental groups were injected into each acupoint with half volume of dosage, respectively. Clinical findings(recumbency time, induction time of anesthesia, time of head lift and standing time) and changes of vital sign(temperature, heart rate and respiration rate) were investigates at pre-anesthesia, during anesthesia and poststanding, respectively. In recumbency time San-yang-luo groupui<0.05) and Tian-ping group (p<0.05) were faster than that of control, respectively and Tian-ping group was the fastest. In induction time of anesthesia San-yang-luo group was similar to that of control, however, Tian-ping group was faster than that of control(p

• 한국시뮬레이션학회논문지
• /
• 제15권4호
• /
• pp.143-151
• /
• 2006

본 논문에서는 A-마트 저온제품 종합물류센터 실시설계 대안별 검증을 통해 신뢰성을 향상하고, 추가 보완사항을 발굴하여 개선하고, 설계의 편의를 제공하기 위한 시뮬레이션 모델을 개발하여 물류센터 설비 및 레이아웃, 운영 방안에 대해 종합적인 대안을 제시하였다. 시뮬레이션을 통한 총 5가지 품종을 65점별로 분류하는 작업장과 각 마트별 출고 대기장을 모델링에 반영하였으며, 운영시간 내에 처리 가능한 작업 파트별 작업자의 수와 작업자 가동률, 각 작업 대기장 및 하역장의 대기용량의 수준을 평가요소로 반영하였다. 또한 입/출고 도크의 가동률과, 팔레트 처리를 위한 운반장비의 가동률을 성능평가 요소로 반영하였다. 개발된 시뮬레이션 모델에서는 실제감 있는 2차원 애니메이션을 통해 시뮬레이션상의 물류의 이상 발생을 시각화하여 보여주도록 하였다. 시뮬레이션의 결과에 대한 평가 요소 및 대안별 정량적 분석을 통해 A-마트 저온제품 종합물류센터의 종합적인 운영방안을 제시하였다.

• 센서학회지
• /
• 제8권5호
• /
• pp.394-399
• /
• 1999

자동차용 박막 히터형 공기 유량센서는 스퍼터링법으로 백금박막을 증착하여 감광막 lift-off법으로 패터닝하고 $1,000^{\circ}C$에서 열처리하였으며, 이 박막을 보호하도록 폴리이미드 PI-2723을 백금박막 위에 도포하여 보호막으로 사용하였다. 제작한 센서를 유량에 따른 특성을 측정한 결과 출력전압이 유량의 4제곱에 비례하였고, 전체 측정 범위에서 유량에 따른 출력전압 오차는 0.7%이내 이었다 제작한 센서를 $-20^{\circ}C{\sim}120^{\circ}C$ 온도범위에서 실험한 결과 ${\pm}1%$의 온도에 따른 출력전압 오차가 발생하여 지금까지 개발된 유량센서의 ${\pm}3%$ 온도에 따른 출력전압 오차보다 ${\pm}2%$ 낮았다. 따라서 제작한 박막 히터형 공기 유량센서는 자동차에 적용하기 위한 사양을 만족하며 온도에 따른 출력전압 오차가 작으므로, 자동차 엔진의 공연비를 정확하게 제어할 수 있게 되어 배기가스 중 오염물질을 줄이고 연비를 향상시킬 수 있다.