• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.530-533
• /
• 2008

Refrigerators have some frost related problems in a freezing compartment. The frost formation in the refrigerator gives customers a bad impression concerning quality problems. Therefore, many engineers have been studying the optimum solution to avoid frost formation. But the problem of frost formation is very complex and hard to approach to the answer. The frost generation of a household refrigerator have been widely known that is closely related to the distribution of temperature inside the compartment. The distribution depends on the cold air circulation inside the refrigerator. So frost problem can be reduced and energy consumption efficiency also improved through optimization of air flow fields inside the freezing compartment. In this paper, numerical simulation has been carried out to check fluid flow. The variation of temperature at the walls was measured and quantitative analysis of frost generated from the freezing compartment was carried out. Through comparison between simulation and experiment, some correlation revealed.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1243-1252
• /
• 2009

User-friendly software was developed to determine the shelf-life of perishable Korean seasoned side dishes in real time based on growth models of spoilage and pathogenic microorganisms. In the program algorithm, the primary spoilage and fastest-growing pathogenic organisms are selected according to the product characteristics, and their growth is simulated based on the previously monitored or recorded temperature history. To predict the growth of spoilage organisms with confidence limits, kinetic models for aerobic bacteria or molds/yeasts from published works are used. Growth models of pathogenic bacteria were obtained from the literature or derived with regression of their growth rate data estimated from established software packages. These models are also used to check whether the risk of pathogenic bacterial growth exceeds that of food spoilage organisms. Many example simulations showed that the shelf-lives of the examined foods are predominantly limited by the growth of spoilage organism rather than by pathogenic bacterial growth.

• 대한치과의사협회지
• /
• 제16권3호통권106호
• /
• pp.235-237
• /
• 1978

Dr. Walter Wright first presented the results of his studies on acrylic resins in July, 1937. The use of resins for adaptation in inlay and crown and bridge prosthesis was first reported in June 1940 by Harris. There has been now and acceptable list of several physical and mechanical properties of acrylic resins which have been studied to a considerable extent by various researchers, or determined from clinical experience. They include; pleasant esthetics, taste, odor, cleanliness, compatibility with oral tissue, dimensional stability, water sorption by imbibition, hardness, ease and success of repair, weight, thermal coefficient of expansion and strength to resist functional stress. The author carried a series of experiments forward to check the strength. Specimens which were cured at boiling temperature showed weaker strength than those ones which were cured at 72℃.

• 제어로봇시스템학회논문지
• /
• 제11권5호
• /
• pp.463-470
• /
• 2005

This paper describes a method aimed at improving dead-reckoning accuracy with gyroscopes in mobile robots. The method is a precision calibration procedure for gyroscopes, which effectively reduces the ill effects of nonlinearity of the scale-factor and temperature dependency. This paper also describes the methods of gyro data collection fur all ambient temperature$(-40^{\circ}C{\~}+80^{\circ}C)$ using cubic spline interpolation and defining the error function. The sensor used was a vibrating gyroscope called the EWTS82NA21, which is low lost and commonly used in car navigation system, made by Panasonic. This angular rate sensor utilizes Coriolis force generated by a vibrating tuning fork. The paper also provides experimental results to check the performance and the effectiveness of the proposed method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.663-668
• /
• 1997

In Korea, the temperature of winter seasons are really severe and cause lot's of snow-falling and iceing in the pavements. Several de-iceing mehtod have generally been adopted to melt the ice on the surface of pavement. Therefore, the Study of experimental in the first stage was given to the verification of the icers's effects. First, Contrete and asphalt pavement specimens were made and scattered with a CaC2-deicers. then 3cm and 5cm thickness of artificial snow were prepared on the surface of specimens. It reveals that the early calorification due to de- icers as high as the temperature of laboratory increases within about 10 minutes and last for more then 2 hours and the test of ice-formation on the surface of contrete and asphalt specimen due to snow leads to the similar rate of freezing time about 20 minutes. Second, three kinds of de-icers, such as CaC2 CaC2+Nacl, Cacl Flaket are rested in the snowy highway to check the iceing-resistance. The CaC2 is proved to be the most effective de-icers so far.

• Structural Engineering and Mechanics
• /
• 제8권1호
• /
• pp.103-118
• /
• 1999

The structural integrity of the reactor pressure vessel under pressurized thermal shock (PTS) is evaluated in this study. For given material properties and transient histories such as temperature and pressure, the stress distribution is found and stress intensity factors are obtained for a wide range of crack sizes. The stress intensity factors are compared with the fracture toughness to check if cracking is expected to occur during the transient. A round robin problem of the PTS during a small break loss of coolant transient has been analyzed as a part of the international comparative assessment study, and the evaluation results are discussed. The maximum allowable nil-ductility transition temperatures are determined for various crack sizes.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2729-2734
• /
• 2009

We report here the surface behavior of zirconium oxide deposited on Si(100) substrate depending on the different substrate temperatures. The zirconium oxide thin films were successfully deposited on the Si(100) surfaces applying radio-frequency (RF) magnetron sputtering process. The obtained zirconium oxide films were characterized by X-ray photoelectron spectroscopy (XPS) for study about the chemical environment of the elements, X-ray diffraction (XRD) for check the crystallinity of the films, spectroscopic ellipsometry (SE) technique for measuring the thickness of the films, and the morphology of the films were investigated by atomic force microscope (AFM). We found that the oxidation states of zirconium were changed from zirconium suboxides ($ZrO_{x,y}$, x,y < 2) (x; higher and y; lower oxidation state of zirconium) to zirconia ($ZrO_2$), and the surface was smoothed as the substrate temperature increased.

• 설비공학논문집
• /
• 제18권3호
• /
• pp.202-210
• /
• 2006

In the nuclear power plant, emergency core coolant system (ECCS) is furnished at reactor coolant system (RCS) in order to cool down high temperature water in case of emergency. However, in this coolant system, thermal stratification phenomenon can be occurred due to coolant leaking in the check valve. The thermal stratification produces excessive thormal stresses at the pipe wall so as to yield thermal fatigue crack (TFC) accident. In the present study, when the turbulence penetration occurs in the branch pipe, the maximum temperature differences of fluid at the pipe cross-sections of the T-branch with thermal stratification are examine.

• 한국추진공학회지
• /
• 제26권6호
• /
• pp.28-33
• /
• 2022

본 연구에서는 일반적으로 사용하는 Hydroxyl terminated polybutadiene(HTPB)계 고체 추진제의 경화 온도와 당량비 변경에 따른 경화 특성을 고찰하였다. 또한, Triphenyl bismuth(TPB), Maleic anhydride(MA) 그리고 Magnesium oxide(MgO) 촉매 시스템에서 이들의 비율 및 함량에 따른 경화 반응 영향도 확인하였다. 마지막으로 추진제 혼화 시 각 공정 별 수분을 투입하여 수분이 추진제 경화에 끼치는 영향을 확인하였다.

• Membrane and Water Treatment
• /
• 제13권1호
• /
• pp.21-28
• /
• 2022

The use of plastics in our everyday lives have been drastically increased during the last few decades. However with the usage of commercial plastic products there is a possibility of microplastic consumption, due to the fragmentation of the products. Additionally, the potential for microplastic ingestion may also be increased by using damaged products. Hence, the current study was conducted to understand the potential release of micro/nano plastics and organic matter from damaged teabags. To check the leakage tendency, the amount of damage to the tea bags from 1-10 cm were tested along with temperatures of 25-70℃, and exposure times from 5 min to 1 hr was tested. Release of fibrous micro/nanoplastics, and organic leachate from the damaged teabags were observed to understand the outflow conditions. Results showed that with the increased degree of damage, temperature, and exposure time increased the release of fiberous matter, where the increase of temperature, and exposure time increased organic leachate. Additional analysis confirmed the leachate of nylon polymers into the heated water.