• 제목/요약/키워드: Telemetry measuring system

검색결과 32건 처리시간 0.03초

비 접촉원격 토오크 측정 시스템 개발 (Development of pushing force measuring system for coke oven machines using telemetry method)

  • 전종학;허윤기;최일섭
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
    • /
    • pp.1778-1781
    • /
    • 1997
  • The coke oven plant on a steel works has not, in the past, been regarded as a prime user of modern instrument technology. The reason for this perception may be due to the fact that the basic design of the coke battery has been changed little over the years. The recording and analysis of oven pushing force on a routine basis is seen as a means of monitoring plant operation. A torque sensor is set up at the shaft of the rotor for measuring pushing force. Pushing force data which is communicated form torque sensor to staor by telemetry method are shown on MMI(Man-Machine Interface) screen and stored in the database automatically. Perhaps the most important feature is that is allows a problem oven to be identified at an early stage and for corrective action to be taken before it develops into a refusal to push. In this way the mechanical loads imposed on the battery structlure can be held to a necessary minimum, so helping to prolong its service life.

  • PDF

과학관측로케트 KSR-420S의 원격측정 지상시스템 설계 (A Design of Telemetry Ground System for the Scientific Sounding Rocket KSR-420S)

  • 이수진;이재득;조광래;유장수
    • 한국전자파학회지:전자파기술
    • /
    • 제2권4호
    • /
    • pp.26-32
    • /
    • 1991
  • 한반도 상공의 오존층 및 대기층 참사를 임무로 하는 과학관측로케트(KSR-420s)는 비행중에 갖게되는 온도, 응력, 가속도, 압력, 자세, Ranging 등의 비행상태 정보와 오존층, 전리층, X-선등의 관측데이타를 지상으로 전송한다. 본 연구에서는 KSR-420s의 비행궤도를 추적하면서 전송되어 오는 신호를 수신 처리하기위한 텔레메트리 지상시스템을 설계하였다.

  • PDF

CDMA/TDMA 기반 무선 원격계측 시스템용 모뎀의 VLSI 구조 설계 (A VLSI Architecture Design of CDMA/TDMA Modem Chipsets for Wireless Telemetry Systems)

  • 이원재;이성주;이서구;정석호;김재석
    • 대한전자공학회논문지SD
    • /
    • 제41권5호
    • /
    • pp.107-114
    • /
    • 2004
  • 본 논문에서는 CDMA 및 TDMA 기술을 기반으로 하는 무선 원격계측 시스템용 모뎀에 적합한 최적 하드웨어 구조 및 VLSI 설계에 대해서 제시한다. 무선 원격계측 시스템은 계측이 필요한 다수의 지점에 소형 무선계측기(RT: Remote Terminal)를 설치하고, 설치된 무선계측기로부터 계측데이터를 무선으로 수집하기 위해 제안된 시스템이다. 무선 원격계측 시스템은 계측데이터를 전송하기 위한 다수의 RT와 RT로부터 데이터를 수집하는 1개의 CU(Central Unit)로 구성된다. 본 논문에서는 이러한 RT와 CU용 모뎀에 적합한 최적 하드웨어 구조를 제안하였고, 제안된 구조를 Verilog HDL로 설계 및 검증하였다. Verilog HDL로 설계된 모뎀은 Synopsys/sup TM/툴을 이용하여 게이트 수준으로 합성되었고, 합성결과 RT 및 CU용 모뎀은 0.6㎛ 공정에서 각각 약 27K 게이트와 222K 게이트의 하드웨어 복잡도를 가졌다. 제안된 모뎀은 Altera/sup TM/ FPGA로 구현 및 검증되었다.

체온측정용 온도 센서 및 모니터링 텔레메트리 시스템 구현 (Development for body temperature sensor and monitoring telemetry system)

  • 이정현;성기웅;김명남;조진호
    • 센서학회지
    • /
    • 제19권6호
    • /
    • pp.435-442
    • /
    • 2010
  • Typically, the vital signs that are representing the state of human body, are the body temperature, sphygmus, respiration and blood pressure. The body temperature is the result of metabolic regulation and human steady-state body temperature is maintained from 35.9 to $37.4^{\circ}C$ by heat regulatory center. The body temperature is indicative of infection and especially it should be monitored to requiring intensive care patients or after surgical patients. But, measuring of body temperature to a heavy workload on nursing staff has been recognized. And, the health service of nurse is limited by simple tasks such as the measurement and record of vital sign. In this paper, the body temperature monitoring telemetry system was proposed to prove the recoding and transmission of body temperature patch system according the standard(ISO TS11073-92001). We proposed the transmission protocol to suit the MFER(medical waveform format encoding rules). The telemetry patch system was implemented and it was verified by experiments.

고속전철 집전장치의 성능 계측 결과 및 분석 (Result and Analysis of Performance Test of Pantograph for High Speed Train)

  • 서승일;박춘수;조용현;목진용;강부병
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 춘계학술대회 논문집
    • /
    • pp.574-579
    • /
    • 2003
  • In this study, a measuring system for performance of pantograph was developed. The measuring system was installed on the prototype high speed train and measurement has been conducted during running on the test track. The measuring system is composed of video monitoring system and telemetry & data processing system. It can monitor the hazard behavior of pantograph and measure acceleration and vertical force of the pan head. Owing to the measuring system, performance of pantograph and safety of interface system of pantograph and catenary is evaluated.

  • PDF

무선 충전 가능한 블루투스 방식의 체내 음향신호 전송용 이식형 바이오 텔레메트리 시스템 구현 (Implementation of Implantable Bluetooth Bio-telemetry System for Transmitting Acoustic Signals in the Body with Wireless Recharging Function)

  • 이상준;김명남;이정현;임형규;조진호
    • 한국멀티미디어학회논문지
    • /
    • 제18권5호
    • /
    • pp.652-662
    • /
    • 2015
  • It is necessary to develop small, implantable bio-telemetry systems which can measure and transmit patients' bio-signals from internal body to external receiver. When measuring bio-signals, like electrical bio-signals, acoustic bio-signal measurement has also a big clinical usefulness. But, sound signal has larger frequency bandwidth than any other bio-signals. When considering these issues, a wireless telemetry system which has rapid data transmission rate proportional to wide frequency bandwidth is necessary to be developed. The bluetooth module is used to overcome the data rate limitation caused by the large frequency bandwidth. In this paper, a novel multimedia bluetooth biotelemetry system was developed which consists of transmitter module located in the body and receiver device located outside of the body. The transmitter consists of microphone, bluetooth, and wireless charging device. And the receiver consists of bluetooth and codec system. The sound inside the skin is captured by microphone and sent to receiver by bluetooth while charging. The wireless charging system constantly supplies the electric power to the system. To verify the performance of the developed system, an in vitro experiment has been performed. The results show that the proposed biotelemetry system has ability to acquire the sound signals under the skin.

고기동 비행체를 위한 추적시스템 개발 (Development of Tracking System for High Maneuvering Vehicle)

  • 조동식;나성웅
    • 한국항공우주학회지
    • /
    • 제36권4호
    • /
    • pp.399-406
    • /
    • 2008
  • 본 추적 시스템은 고기동 비행체에 대한 비행 시험시 원거리에서 무선으로 전송되는 계측 데이터와 영상 데이터를 수신하기 위하여 개발되었다. 추적 시스템의 추적 방식은 위상비교 모노펄스 방식이며 이 방식은 추적 시스템에 장착되는 4개의 패치 안테나로 입력되는 무선 신호의 위상차를 측정하여 추적 데이터를 산출한다. 제작된 추적 시스템은 무선 조종 헬기 추적 시험, 로켓 추적 시험 등을 통하여 추적 성능을 입증하였다.

무선계측기를 이용한 회전자팬 및 엔드링에서의 대류 열전달 (Convective heat transfer on the rotor fan and endring of the TEFC induction motor with telemetry system)

  • 윤명근;하경표;고상근
    • 대한기계학회논문집B
    • /
    • 제22권4호
    • /
    • pp.510-519
    • /
    • 1998
  • Recently, computer modelling is increasingly used as a design tool, which requires more detailed data for heat transfer coefficients in various regions of the induction motor. But there are little information about those of rotor fan and endring because of difficulty in measuring signals in rotating bodies. In the present studies, the temperature signals were precisely measured with self-developed telemetry system, which had multi-channels and high rotational speed. After some losses were compensated, the heat transfer coefficients of the rotor endring and fan surfaces were measured. Minimum heat transfer region was existed with endcap plate distance and maximum heat transfer was found at some rotor fan width. It was also studied that how the guide plate and endcap inside rib effected on the rotor heat transfer. The higher heat transfer were obtained with decreasing guide plate distance, increasing the number and height of endcap inside rib. The correlation equations of the results were obtained and compared with others. Above results of the heat transfer coefficients can be used as basic data for cooling design of the various kind of motors.

대형 접시형 안테나 추적성능 검증에 관한 연구 (A Study on the Validation of Tracking Performance of a Big Parabola Antenna System)

  • 오창열;오승엽
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권5호
    • /
    • pp.77-82
    • /
    • 2010
  • 무선주파수를 사용하는 추적안테나의 추적성능은 비행체 추적 및 위치 측정에서 매우 중요한 요소이나, 전기적 물리적으로 매우 큰 안테나의 특성을 정확히 측정하는 것은 쉽지 않다. 특히 우주응용분야에서 사용되는 대형 접시형 추적안테나 시스템과 같이 신호원을 따라 안테나의 지향방향이 변하는 경우에는 안테나 지향방향에 따라 특성이 일정하지 않을 수 있다. 본 논문에서는 대형 추적안테나 시스템의 추적 성능지표인 지향정확도 및 추적정확도에 영향을 주는 오차요인을 검토하고, 나로우주센터에서 원격측정용으로 사용하고 있는 11m 대형 접시형 추적안테나에 대한 추적성능을 효율적으로 측정할 수 있는 저궤도위성(Low Earth Orbit)을 사용한 측정방법 및 그 결과를 기술한다.

소화관 내 압력 측정을 위한 텔레메트리 캡슐 구현 (Telemetry capsule for pressure monitoring in the gastrointestinal tract)

  • 윤기원;우상효;이정현;문연관;박희준;원철호;김병규;최현철;조진호
    • 센서학회지
    • /
    • 제14권4호
    • /
    • pp.211-218
    • /
    • 2005
  • As the cause and the treatment about gastrointestinal disease has been issued recently, the importance of measuring the pressure in the gastrointestinal tract has been increased. However, the conventional measurement methods of the pressure in the gastrointestinal tract cause the patients' pain and inconvenience as well as an inaccurate pressure measurement. In this paper, the pressure monitoring telemetry system has been designed and implemented for an accurate pressure measurement inside the gastrointestinal tract with minimizing pain and inconvenience. The pressure monitoring telemetry system is composed of a pressure measurement capsule and an external receiver. The capsule has been miniaturized into the same size of a vitamin tablet so that the capsule can be swallowed through the oral cavity. After the capsule acquires and encodes the pressure data in the gastrointestinal tract, the encoded pressure data are modulated by frequency shift keying (FSK) and transmitted with ultrahigh frequency (UHF) band signal to the outside of a body. The performance of the telemetry capsule for monitoring pressure in the gastrointestinal tract is demonstrated by the results of animal in-vivo experiments.