• 한국디지털정책학회:학술대회논문집
• /
• 2007.06a
• /
• pp.59-67
• /
• 2007

현재 우리나라의 상수도 시스템의 경우 대부분 각 가정집에 설치된 계량기의 측정값을 검침원이 육안으로 확인, 수기 기입 방법으로 수도 검침이 이루어지고 있다. 이러한 방법은 사생활 침해 및 범죄로 이어질 가능성이 있다. 본 논문에서는 상수도의 검침데이터를 무선주파수 및 코드분할다중접속방식을 사용하여 송수신 가능한 네트워크 망을 구축, 수신된 데이터 값을 활용하여 각 상수도 수용가의 사용량을 자동으로 검침하여 청구 내역서까지 작성해 주는 상수도 원격검침시스템을 소개한다. 상수도 자동검침시스템은 검침을 자동화하고 이를 무선송신 가능한 검침기와 검침기의 검침데이터 값을 송수신 할 수 있는 중계기 및 집중기, 그리고 CDMA 망을 통한 검침데이터를 수신할 수 있는 애플리케이션 서버 등을 구축하여 지역 내 원격검침 네트워크 망을 구축하는 것을 포함하고 있다. 본 연구의 시스템은 화재, 가스, 전기 등의 검침데이터를 통합으로 수집하여 데이터를 관리하는 통합 시스템으로의 확대가 용이하며 이러한 상수도 원격검침시스템은 누수 및 독거노인 등의 생활보호대상자의 안전을 확인하는 기초 정보로도 활용할 수 있다.

• Journal of Digital Convergence
• /
• v.7 no.3
• /
• pp.103-111
• /
• 2009

In this paper, we introduce automatic meter reading system for tap water. The system is composed of automatic meter, router using RF and CDMA network, and data server. This system will easily extend to fire detect, gas, and electric charge meter system. In addition, this system will be used to monitoring a water leak and human which live in solitude. Proposed system is installed at Gimhae-City and Gijang-gun. As a result of the automatic meter reading system for tap water, The leak of water and complain of user is decreased. But The building cost is still an obstacle to expand into entire city.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.2
• /
• pp.139-147
• /
• 2013

This study analyzed agricultural water distribution systems for the utilization of water demand-oriented water supply systems. Three major TM/TC(telemeter/telecontrol) districts of agricultural water management were selected for analyzing the characteristics of the water distribution systems. In addition, the characteristics of the water supply systems for general water supply zones based on irrigation facilities were also investigated, along with the case of special water management during the drought season. As a result, high annual and monthly variations were observed for the water supply facilities, including the reservoirs and pumping stations. In particular, these variations were more obvious during the drought season, depending on the type of facility. The operations of the pumping stations and weirs were more sensitive to the stream levels than the reservoirs, and the smaller reservoirs were influenced more than the larger reservoirs. Therefore, a water-demand-oriented water supply system should consider the existing general practices of water management in the agricultural sector, and focus on achieving a laborsaving system rather than water conservation in the case of reservoirs. Equal water distribution from the start to the end point of irrigation channels could be an effective solution for managing pumping stations.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.84-88
• /
• 2015

In this paper, we present that design and implementation of digital extreme-low-frequency (ELF) magnetic meter including wireless monitoring feature. In our lifetime, it is necessary to study how much magnetic field effects to human body. In this paper, we use 3-axis coil-type magnetic sensor, magnetic measurement range is 0.03~10uT and frequency range is 40~180Hz. As magnetic sensor characteristic, frequency loss is occurred that compensated using digital equalize based on DSP processor. Measurement value can be monitored on PC through Wifi communication and measurement error is observed within 6%.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.3
• /
• pp.42-53
• /
• 1998

About 50 percent of irrigation and drainage facilities in our country are deteriorated as they were constructed over 40 years ago. Worsening the problems in function might be caused by these facilities' constant exposure to the elements. With these reason, efficient maintenance and management of irrigation and drainage facili- ties are required. A computerized system is tailored on the basis of the each characteristics'data of irrigation and drainage facilities. The unified management system to be introduced in this study is a package program consisting of three subprograms. Facility Management(FM) system, the first component, is a relational database system for image processing and registering the characteristics of irrigation and drainage facilities. The objective of this program is to manage the ledger of each facilities and to scan the characteristics of facilities. Telemeter(TM) system, the second component, monitors and processes the data from the sensors statistically. This system is preprogramed for the complete design of TC/TM system. Hydrological Data Management(HDM) system, the third component, executes the hydrological analysis using meteorological data. The unified management system can provide the latest information, such as image data, lists and items of facilities, and items of reforming and rebuilding etc., of the facilities to the manager. At the same time, this system can manage hydrological and meteorological data in realtime.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.140-145
• /
• 2009

Recently, lots of research activities have been carried out to provide advanced smart control functions applying a computer networking technology to telemeter/telecontrol systems. In this paper, we suggest client/server architecture with specially designed remote and local control software for applicant those to greenhouse model. The server system collects and integrates various datas related sensor or actuator, and stores in database maintaining high quality of remote I/O control operation. Where as the client system simply operation such as control panel on the internet web browser. Implemented system well communicate interactively both monitoring and control status of greenhouse including multimedia informations. In this study we also analyze the extent of the performance enhancement in terms of overall throughput and data transfer time effected by packet size.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.159-166
• /
• 2006

The purpose of this study were analysed fatigue character of lumbar extension Muscle during repeated trunk flexion-extension motion we used EMG multi-telemeter (WEB 5000, Nihon Koden, Japan), Medex lumbar extension machine(Ocala, USA). We evaluated 20 persons on chronic low back pain group and 20 persons on control group. We analysed the quantitative variables IMF, MF, decreased ratios of MF to investigate fatigue. As a result, the following conclusion was drawn : 1. Each lumbar IMF of CLBP was L5> L3> L1 in the order of their size. CON group was similar quantitative and same order. But the relationship of two groups were not significantly. 2 The IMF within lumbar position(L1-L3, L1-L5, L3-L5) of two groups was significantly all positions(p<.05). 3. The MF shifting at lumbar position of two groups during repeated trunk flexion-extension motion was decrease shifting pattern with increase repeating motion, especially CLBP group was suddenly dropping than CON at all lumbar positions(L1, L3, L5) on early stage motion(34 set). 4. The lumbar fatigue of CLBP was higher than CON during repeated trunk flexion-extention motion, so CLBP supposed more tired than CON. And it was significantly within two groups at lumbar positions(L1, L3 : p<.05, L5 : P<.01).

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.357-360
• /
• 2011

Machine tools of Gantry type have been performing machine work as a moving machinery. In a large machine tools, the machinery is moving with bed and it is structurally unstable. When the objects are processed, machine tools gets loads in the direction of Z-axis. In other words, the machine tools which become bigger was performed by the trend of complexation. It made that the increased machine weight can't be passed over. In order to enhance manufacturing precision, it needs to compensate Z-axis deflection of weight for machine tools. In this paper, Machine tools of Gantry type were miniaturized and deflection was measured by LVDT sensors. When deflection was measured, block mass weighted 50kg is moving on particular distance. Then, the displacement of fixed point and moving point is measured by recording telemeter.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.1-11
• /
• 2004

Water quality is monitored at 1,837 points which are streams and sources for water supply in Karea. The monitoring carry out the measurement of 16 parameters of pH, BOD, SS, DO and so on with once a month, and of other parameters such like heavy metal with once a quarter. But most of the monitoring is carried out uncontinuously, so it is very difficult to understand exactly the changes of water quality compared with continuous monitoring. Therefore, real time monitoring system was equipped with basic parameters such as pH, temperature, DO, turbidity and electric conductivity at 25 major sources of water supply after installation of Noryangjin and Dukdo in 1974. But the systems have some problems which cannot be considered the sampling sites to represent for water quality of stream of lake, and can be caused a change of water quality by long distance from analyzer to intake pipe. Therefore, it has carefully to evaluate selection of sample sites for real time monitoring system. Also, problems on the area has been to identify which parameters are best suited to monitoring stream of lake water and the differences, of analyzing results compared with manual analyzing. This paper presents some approaches to handle such problems, namely selection of sampling site and measurable parameters, to connect with bio-monitoring system solving a Limitation of measurable parameters, The bio-monitoring system of an early alarm that is desirable to perceive a toxic material inflow into stream can be applied to continuos water quality monitoring system effectively. Also, this paper presents to build a on line system transmitting immediately from a mobile analyzer house or container to main monitoring center the results of analyzer by a telemeter.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.