• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1718-1720
• /
• 1997

This paper deals with n rise in electric potential of telecommunication line for electric power system by lightning surges. When $1.2/50{\mu}s$ and $8/20{\mu}s$ impulse voltage and current were applied on telecommunication cable, the voltage waveforms at the end terminal and equipment were measured. The telecommunication lines, which consist of 60 conductors and 3.5km in length, have some surge protectors such as preposition lightning arrester and TVSS. In each case, the rise in electric potential was measured for differential mode and common mode, respectively. Also, the rise in ground potential and the induced voltages were measured and analyzed. As a result, a significant rise in ground potential was observed for lightning surge. It can cause failure or malfunction of telecommunication systems.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.1
• /
• pp.88-101
• /
• 2004

The Third Generation (3G) cellular mobile communication systems aim at providing higher data rates, improved quality of service, support for multimedia applications and global roaming. Cdma2000 and Universal Mobile Telecommunication System (UMTS) have emerged as two leading 3G standards in USA and European countries, respectively. Both the standards are capable of delivering high bandwidth data, voice and multimedia services to users of mobile equipment, but are not directly interoperableand are not available across different geographic areas, due to which global roaming is not possible in true sense of using single mobile equipment. However, both UMTS and cdma2000 are based on wideband code division multiple access (WCDMA) as the access method. Due to this, there exist some inherent commonalities between them. In this paper we will try to exploit the commonalities between the two standards in order to design an ASIC, which can provide dual standard capability. This paper discusses the physical layer aspects of the two standards and proposes an approach to design an ASIC which can be mapped to baseband processing part of the physical layer and is capable of delivering for either of the two aforementioned standards.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.10
• /
• pp.710-717
• /
• 2007

Electric and telecommunication industries are constantly striving towards miniaturization of electronic devices. Miniaturization of chips creates extra space on PCBs that can be populated with additional components, which decreases the heat transfer surface area and generates very high heat flux. Even though an air-cooling technology for telecommunication equipment has been developed in accordance with rapid growth in electrical industry, it is confronted with the limitation of cooling capacity due to the rapid increase of heat density. In this study, liquid-cooling heat exchangers with MPCM slurries were designed and tested by varying geometry and operating conditions. The liquid-cooling heat exchangers with 4-paths showed higher cooling performance than the others. The cooling performance of liquid cooling heat exchanger with MPCM slurries was more enhanced than that of the air cooling system. It's performance was also slightly superior to that of the water cooling system at the inlet temperature of $19^{\circ}C$.

• Journal of Technology Innovation
• /
• v.12 no.1
• /
• pp.189-218
• /
• 2004

In this paper, we estimate consumers' preferences for the key attributes of the future mobile telecommunication terminal using conjoint analysis. For statistical model, we estimate the mixed legit model which can reflect the heterogeneity of consumers' preferences, using the Bayesian approach with Gibbs sampling. The results show that there are large variations in consumers' preferences for the attributes of the future mobile telecommunication terminal, which justifies our using of mixed logit model. Also, the results show that most consumers prefer the medium size display and keyboard as input equipment. Additionally, far from general prediction, the results show that many consumers are indifferent to whether the future mobile telecommunication terminal is able to provide high quality internet service or not, and to operate many application programs and programs originally designed for PC. From those results, we can obtain some important implications for the R＆D strategies. Additionally, the results on the heterogeneity of consumers' preferences reveal that it is possible that the complete device convergence may not happen.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3043-3045
• /
• 2005

기업체나 연구소와 같은 전자기자재의 사용이 많은 곳에서 효율적인 기자재 관리는 필수적이다. 이에 따라 모든 기자재를 관리하는 데이터베이스의 필요성이 대두된다. 본 논문은 데이터베이스를 카운터가 내장된 기자재로부터 추가적인 망의 포설 없이 기존의 전력선을 이용하여 음성통신과 초고속 통신이 가능한 전력선 통신(PLC:Power Line Communications)[1]를 통해 데이터베이스를 수집하고 수집된 데이터베이스를 무선으로 모니터링 할 수 있는 시스템을 구현하는데 그 목적이 있다. 이 시스템의 구현을 위해 ARM9 core를 기반으로 한 임베디드 리눅스 시스템에 웹서버, 무선프로토콜 등을 포팅하여 무선네트워크가 가능한 PDA, 노트북 등을 이용하여 손쉽게 모니터링 할 수 있는 시스템을 구현하고자 했다.

• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.177-191
• /
• 1996

Quality is defined as several terms of fitness for use, conformance to requirements or specification, and loss of social effect. And the quality can be classified into design, production and service quality according to its formation of product (or servece). To be satisfactory product, the product must be controlled to maintain the specified level of quality at the whole life cycle of R&D step through disposal step. And the wrong design is one of the great source of cost. Therefore, the quality assurance on the R&D step is very important. This paper suggests a general procedure for the R&D quality assurance and discusses the methods for the reliable design. And a telecommunication equipment is considered as an applied example. Finally, it is discussed some subjects on the R&D quality assurance as further researches.

• ETRI Journal
• /
• v.6 no.3
• /
• pp.3-8
• /
• 1984

Telecommunication equipment is very obsolescent product from commercial point of view and its industry is large scale as well as its inter-industrial linkage effect is enormous. Therefore investment in it should be carefully carried out. However decision making on this problem is very difficult because the environment of investment is too much complex with multiple objectives. Goal-programmed Investment Model in Telecommunication Equipment is discussed in this study to solve the above problem. The effectiveness and workability of this model is verified by Telephone Exchange Case through computer program.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2203-2217
• /
• 2016

To prevent structured peer to peer (P2P) overlay networksfrom being attacked by malicious nodes, a symmetric lookup-based routing algorithm referred to as Symmetric-Chord is proposed in this paper. The proposed algorithm determines the precision of routing lookup by constructing multiple paths to the destination. The selective routing algorithm is used to acquire information on the neighbors of the root. Authenticity of the root is validated via consistency shown between the information ascertained from the neighbors and information from the yet-to-be-verified root, resulting in greater efficiency of resource lookup. Simulation results demonstrate that Symmetric-Chordhas the capability of detecting malicious nodes both accurately and efficiently, so as to identify which root holds the correct key, and provides an effective approach to the routing security for the P2P overlay network.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.495-499
• /
• 2008

Last year UMTS (UMTS: Universal Mobile Telecommunication System) 3G service started and these days 3 its service subscribers sharply increased. Now totally we have been increasing 13 million subscribers, every month 0.8 million people join 3G Service. MSC (Mobile Switching Center) is most important equipment in 3G system, so we call it 'core' network. Higher capacity MSC required to accommodating 1 million subscribers. It is very important whether MSC can accommodate maximum subscriber or not. So systematic analysis, reliable test results are required. This article presents WCDMA MSC performance evaluation case. This would be some direction for designing and developing some communication equipment. This Case Study demonstrates our MSC system performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.617-620
• /
• 2001

The protection of communication lines against harmful effects from electricity lines is very important with the rapid development of communications network. This paper is introduced the reference of noise voltage and the test methods of foreign countries. Further we will also present study measurement equipment for telecommunications noise voltage and circuit noise phenomenon.