• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.151-154
• /
• 2007

This paper describes the project for constructing a traceability system for producing using RFID antenna in 900MHz frequency band and the consideration. In this project we reviewed analysis of properties classified by production process and RFID system through each frequency band, and designed a single unit RFID reader including antenna. The developed antenna is optimized to a field condition and this paper will show the test results. Also, we designed a single unit RFID reader by adding a reader to a designed antenna and explained the rule of tag memory allocation. Lastly, after running the system we could calculate visible and invisible effects of operation results and check up a wide possibility of application for RFID.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2002년도 하계학술대회 및 세미나
• /
• pp.31-34
• /
• 2002

본 논문은 Ku-band(12.4-18 GHz) 위성통신 시스템 및 이동통신 중계기용 송수신부에 사용되는 고안정도 전압제어 유전체 공진기(Voltage Controlled Dieletric Resonator Oscillator)의 설계 및 제작에 대해 논하였다. 유전체 공진기(Dielectric Resonator)의 등가회로 모델을 이용하여 유전체 공진 발진기(Dielectric Resonator Oscillator)를 설계 알고리즘화 하였다. 유전체 공진 발진기와 바렉터 다이오드를 이용하여 13.4 GHz의 전압 제어 유전체 공진 발진기를 제작하였다. 이때의 출력 전력은 +12dBm이고 위상잡음은 offset 주파수 100kHz에서 -105 dBc/Hz로 측정되었다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.3-6
• /
• 2003

Effect to altered geometry of a suggested defected ground structure(DGS) unit cell was investigated . And equivalent circuit model was extracted from the DGS unit cell A microstrip band Pass filter with DGS has been designed in this Paper. The BPF with DGS was fabricated and obtained experimental results with network analyzer HP8510C. Experimental results show the center frequency of 2.45GHz, the insertion loss of 0.85dB, and the 3-dB bandwidth of 470MHz (19.5%). The center frequency of BPF is 2.4GHz which is available for wireless LAN.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.293-295
• /
• 2003

In this paper, planar harmonic rejection low-pass filter is proposed to effectively suppress spurious response in stop-band. For suppress the unwanted signal such as spurious and harmonics, we presented a new design method controlled the higher order modes. The proposed low-pass filter was shown to suppress the spurious response by more than $20{\sim}40dB$ compared with conventional microstrip low-pass filters. The filter is evaluated by experiment and simulation with good agreement and shown to have attractive properties such as wide stop band range and low insertion loss.

• Journal of electromagnetic engineering and science
• /
• 제9권4호
• /
• pp.223-228
• /
• 2009

In this paper, a quadrafilar antenna is designed to have a lower profile as an essential part of the size reduction technique and lower back radiation(i.e. higher forward radiation) for the S-band telemetry/telecommand(TM/TC) function of a communication satellite. Particularly, to meet the challenging requirements on the higher isolation between the TM/TC antennas and simultaneously a smaller size, the lowest back radiation and lowest cross-polarization, the optimal physical dimensions of the quadrafilar antenna are found by using the Genetic Algorithm(GA). To prove the validity of the proposed antenna design, its 3D electromagnetic analysis and measured results are compared, showing good agreement.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.208-211
• /
• 2006

In this paper, a tunable image rejection filter using two varactors is developed for mobile convergence. The filter is fabricated on a 0.25um substrate. ESD Pad is embedded to prevent damage caused by electrostatic discharge(ESD). Bias voltages are at WCDMA(2.1GHz). WiBro(2.3GHz), and WLAN(2.45) are 0.5V, 0.95V and 1.8V respectively. And the image rejection rations are more than 28dB at each band and insertion losses are less than 2dB at each band.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.87-90
• /
• 2006

Nowadays, we can enjoy access to high speed network and advanced services of convergence between broadcasting and communication anywhere and anytime through a ubiquitous computing. So, now digital convergence devices come out constantly. These devices are required faster network environment for high speed data processing than before. In this paper, we describe the design of InfiniBnad network adapter, which is included two FPGA chipsets. When this adapter is installed to Digital Convergence Platform (DCP) network performance will be improved. The adapter includes 12channel serial ports for external communication and internally, uses PCI-Express bus. We have finished the test of high speed serial based network adapter through composing complete InfiniBand network and applied fabric management software. So, we have verified that it can be applied on DCP environment.

• 기술사
• /
• 제24권1호
• /
• pp.95-103
• /
• 1991

The communication transmission engineering plays the most important role in electrical communications engineering. Recently, it has been making remarkable progress as an infrastructure supporting informationaged society. Specially, the start of television conference and service of high speed digital transmission can be said it is announcing a raising curtain of high speed broad band age. Together with high speed broad band service needs a capacity as much as several or several hundred times of telephone with one circuit, various kinds of service forms are anticipated to emerge, it is anticipated to give a big impact to the way of future communications newtork. At present, telecommunication network is transforming telephone voice information by analog technology into a flexible higher system disposable of a variety of information such as pictures or data other than telephone by the introduction of digital technology. Consequently, the development of hereafter for the following respective technologies is desired.

• 기술사
• /
• 제24권2호
• /
• pp.127-136
• /
• 1991

The communication transmission engineering plays the most important role in electrical communications engineering. Recently, it has been making remarkable progress as an infrastructure supporting informationaged society. Specially, the start of television conference and service of high speed digital transmission can be said it is announcing a raising curtain of high speed broad band age. Together with high speed broad band service needs a capacity as much as several or several hundred times of telephone with one circuit, various kinds of service forms are anticipated to emerge, it is anticipated to give a big impact to the way of future communications network. At present, telecommunication network is transforming telephone voice information by analog technology into a flexible higher system disposable of a variety of information such as pictures or data other than telephone by the introduction of digital technology. Consequently, the development of the hereafter for the following respective technologies is desired.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.443-447
• /
• 2005

In this paper, a low noise amplifier(LNA) in a receiver of a Low Noise Block Down Converter (LNB) for direct broadcasting service(DBS) is implemented using GaAs HEMT. The 2-stage LNA is designed for the bandwidth of 11.7GHz - 12.2GHz. The result of a simulation of the LNA using Advanced Design System(ADS) shows that the noise figure is less than 1.4dB, the gain is greater than 23dB and the flatness is 1dB in the bandwidth of 11.7 to 12.2GHz.