• 정보통신설비학회논문지
• /
• 제8권3호
• /
• pp.111-115
• /
• 2009

Cognitive Radio (CR) technology is proposed for using the unused spectrum band efficiently because of the spectrum scarcity problems. Spectrum sensing is one of the most challenging issues in cognitive radio system. In this paper, we focus on the signal detection of WiBro system band. As most of the modulated signals can be treated as cyclostationary random process, we can detect the signal of the OFDM signals in WiBro system. OFDM symbols using WiBro system have several pilot subcarriers and periodic pilots have cyclostationary characteristic. To improve the detection performance, we get diversity gain using multiple antennas.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.25-28
• /
• 2003

본 논문은 Ka 밴드(26.5GHz-40GHz)를 사용한 양방향 멀티미디어 시스템의 설계에 대해서 다루고 있다. 우선 무궁화 3호 위성을 이용한 시범사업의 구성 및 운영과정에 대해서 개괄하고, 시범운영에서 발견된 문제점을 소개한다. Ka 밴드 양방향 위성 시스템은 MF-TDMA(Multi-Frequency Time Division Multiple Access) 방식을 사용하여 최대 전송속도 2Mbps 이상이고, QOS(Quality of Service) 제공 등 다양한 기능을 갖추고 있으나 Ka 주파수 특성상 그 안정성에 있어서 어려움을 갖고 있다. 강우감쇄 및 전송 지연 등의 현상들을 소개하고 향후 위성 양방향 시스템의 구성과 응용 서비스를 구현할 때 고려해야 할 사항들에 대해 고찰해 보고, 해결방안을 제시하였다.

• 정보통신설비학회논문지
• /
• 제3권2호
• /
• pp.18-25
• /
• 2004

As using of network Increases rapidly, performance of system has been deteriorating because of the overhead and bottleneck. Nowadays, high speed I/O network standard, that is a sort of InfiniBand, PCI Express and so on, has come out to improve the limites of traditional I/O bus. The InfiniBand provides some protocols to service the applications such as SDP, SRP and IPoIB. In our paper, We explain the architecture of SDP(Socket Direct Protocol) and its features in channel based I/O network. And so, we provide a result of performance evaluation of SDP which is compared with current network protocol. Our experimental results also show that SDP is better than TCP/IP protocol.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.463-469
• /
• 2016

In this paper, the use of a dual composite right/left-handed coplanar waveguide (CPW) transmission line is proposed for the design of a band rejection filter. The notch property of the filter is achieved by combining the convex signal line with the shorted concave meander line, and the equivalent circuit model is extracted from the geometry of the unit cell for organizing the band rejection property. Then the equivalent parameters of the unit cell are analyzed to identify those behaviors. And the dispersion characteristics and energy distributions are simulated. In the end, the band rejection filter is manufactured by cascading two proposed unit cells. We show that the measurement result for the resonant frequency demonstrates good agreement with the simulation result and the band rejection filter provides a rejection performance of 17.5 dB at the stopband frequency ranging from 869 MHz to 894 MHz.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.215-218
• /
• 2009

In this paper, Dual-band bandpass filter studied design using Parallel Coupled SIR(Stepped Impedance Resonator). This Dual-band bandpass filter design SIR of half-wavelength by Parallel-coupled type that is available to RFID system and Changed structure in Meander form by size reduce. Because seen Dual-band bandpass filter is designed so that is applicable for frequency 433MHz and 2.45GHz of RFID system is very wide distance between two pass-band, establish 433MHz by fundamental frequency and controlled 2.45GHz by 2st spurious resonance frequency bandstop filter of 1st spurious resonance frequency and Parallel coupled SIR Combine to remove 1st spurious resonance frequency.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.34-38
• /
• 2015

A band stop filter is proposed with cascading unit cells that are based on a dual composite right/left-handed (D-CRLH) conductorbacked coplanar waveguide. The parameters of the unit cell have been analyzed to confirm the behavior of each component for the equivalent circuit of the cell. We simulated the dispersion characteristics and energy distribution and have determined that the unit cell has a D-CRLH property. The band stop filter was implemented by symmetrically cascading two of the proposed unit cells. The experimental results for the band stop filter revealed a band rejection performance of 32 dB and a return loss of 0.35 dB in the stopband frequency range from 869MHz to 954MHz. Finally, we show that there is a good agreement in the experimental results and those obtained through the simulations.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.557-562
• /
• 2017

In this paper, we show the design of a rotary joint transition for the X-band channel in a rotatable microwave communication system. The transition seems complicated to make a channel between two coaxial cables through a cylindrical waveguide. To make a broad-band performance in the X-band with low insertion loss and return loss given the constraint on the length and radius of this complicated-looking cylindrical structure, Genetic Algorithm optimization is adopted to check the validity of an intensive parametric study in the design. The structure is fabricated and tested to show how valid the design method is as well as good frequency responses.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.339-342
• /
• 2005

In order to support ultrawide-band signal generation for low rate WPAN, several types of signal generation mechanisms are suggested such as Chaos, Impluse, and Chirp signals by the activity of IEEE 802.15.4a. The communication system applied chaos theory may have ultrawide-band characteristics with spread spectrum and immunity from multipath effect. In order to use the advantage of chaotic signal generation, we introduce the system implementation of communication and networking systems with the chaos UWB signal. This system may be composed of mainly three parts in hardware architecture : RF transmission with chaotic signal generation, signal receiver using amplifiers and filters, and 8051 & FPGA unit. The most difficult part is to implement the chaotic signal generator and build transceiver with it. The implementation of the system is devidced into two parts i.e. RF blocks and digital blocks with amplifiers, filters, ADC, 8051 processor, and FPGA. In this paper, we introduce the system block diagram for chaotic communications. Mainly the RF block is important for the system to have good performance based on the chaotic signal generator. And the main control board functions for controlling RF blocks, processing Tx and Rx data, and networking in MAC layer.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.339-343
• /
• 2006

We observed the application possibility of inductive coupler for the underground high-voltage power line communication by means of analysis of signal transmission characteristics and magnetic properties on annealing temperatures for high-permeability Fe-base amorphous alloys. The best electromagnetic and transmission characteristics were shown in nano-crystalline precipitated alloy annealed at temperature $510^{\circ}C$. The transmission characteristics in the low-frequency band depend on permeability of magnetic core materials and its properties of high-frequency band can be improved by impedance matching. Using the high pass filter embedded in the coupler, other noise signal band except for communication signals could be cut off.

• 대한전자공학회논문지TC
• /
• 제47권2호
• /
• pp.62-66
• /
• 2010

본 논문은 높은 Q 특성을 갖는 이중 H자 형태의 메타 전자파구조의 공진기를 적용한 발진기를 제안하였다. 제안된 발진기는 고성능의 주파수합성부에 적용하기 위한 것으로 저위상잡음 및 높은 출력 전력을 요구한다. 특히 이중 H자 형태의 메타 전자파구조(DHM)는 전기장의 커플링을 강하게 하여 발진 주파수에서 높은 Q 값을 갖도록 설계되었다. 이러한 특성을 통해 우수한 위상잡음 특성을 얻을 수 있다. 이중 H자 형태의 메타 전자파구조를 이용한 발진기는 레이더 시스템의 주파수 합성부에 적용하기 위한 X 대역 내 발진을 형성하였으며 출력 전력은 4.33 dBm, 위상잡음은 100 kHz 옵셋에서 -108 dBc를 얻을 수 있었다.