• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.293-298
• /
• 2014

Large spaceborne antennas should be lightweight, a factor related to the development costs of launch vehicles. In order to overcome this drawback, a feasibility study of a new carbon fiber reinforced polymer (CFRP) named M55J/RS3 is carried out for a synthetic aperture radar (SAR) reflector antenna. In particular, the high resolution of detected images is taken into consideration. To validate the electrical performance, a test of the CFRP specimen is fabricated, and the transmission/reflection coefficients are measured using a standard X-band waveguide. Finally, the effective complex permittivity and effective electrical conductivity are derived from the obtained measured data. By applying the derived conductivity to the simulation of the radiation pattern, antenna gain, and beamwidth-instead of relying on the assumption of a perfect electric conductor-variations in electrical performance are also investigated and discussed.

• 정보통신설비학회논문지
• /
• 제2권4호
• /
• pp.28-41
• /
• 2003

A micros-strip ring patch antenna with ultra wide band characteristics is presented. The proposed antenna is designed by a modified form of the annular ring patch antenna with modified microstrip feedline. The designed antenna gives 5.6GHz bandwidth with regular radiation pattern from 4.4GHz to 12.0GHz for -10dE return loss or VSWR of less than 2.0 in simulation, which is also excellently agreed with the measured data.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.7-11
• /
• 2003

CDMA(code division multiple access) has very large peak to average power ratio(PAR) and behave as noise-like wide band digital signals with 1.2288 Mbps transmission rate. For signals with high PAR like CDMA, it is reasonable to prescribe occupied bandwidth(OBW) as average occupied bandwidth. Bandwidth measurements of CDMA signals at remote site are affected by co-channel and adjacent channel interference from adjacent CDMA base station, distortion of signal by fading effect, spurious emission and environment noises. In this study, we have compared OBW measurements in an on-air environment with those measured in a base station using adjacent channel leakage ratio(ACLR) as a reference measurement factor. As results of analysis, the OBW at ACLR$\geq$35 ㏈ shows nearly same statistical characteristics regardless of the measurement locations and environments.

• Journal of electromagnetic engineering and science
• /
• 제5권4호
• /
• pp.176-182
• /
• 2005

In this paper, an efficient multipaction analysis method of a manifold multiplexer for satellite applications is presented. While FEM(Finite Element Method) is used for the multipaction analysis of the lowpass filter, the equivalent circuit model is used for the analysis of the channel filters and the manifold. Employing equivalent circuit model for multipaction analysis takes less time than using EM(Electromagnetic) field analysis method while keeping the accuracy of the multipaction analysis. This present analysis method is applied to the manifold multiplexer for Ka-band satellite transponders and the results show that the present method is as accurate as the conventional EM field analysis method.

• 정보통신설비학회논문지
• /
• 제2권1호
• /
• pp.5-12
• /
• 2003

본 논문에서는 밀리미터파 대역에서 저손실 특성이 우수한 전송선로인 non-radiative dielectric(NRD) 도파로와 마이크로스트립 변이구조에 관해 연구하였다. 본 연구에서 이용된 변이구조는 apeture 결합을 이용한 것으로 NRD와 마이크로스트립 사이의 aperture 를 통하여 자계가 결합되는 원리이다. Aperture의 구조를 각각 직각사각형과 ridge 형태로 설계하였다. 비교를 위해서 설계된 마이크로스트립과 마이크로스트립 변이구조의 경우 aperture의 구조를 ridge 형태로 했을 때 직각사각형일 때 보다 삽입손실 특성이 개선되었고 더 넓은 대역폭를 가지는 것을 딸 수 있었다. NRD와 마이크로스트립 변이구조의 경우는 대역폭면에서 ridge 구조와 직각사각형 구조 모두 비슷한 특성을 보였다.

• 정보통신설비학회논문지
• /
• 제2권1호
• /
• pp.13-21
• /
• 2003

This paper presents the analysis of the mode characteristics of an annular ring microstrip patch antenna for circular polarization with attachment mode using method of moments in the spectral domain. For a probe excitation, the input impedance are obtained by using the single mode approximation for both the $TM_{11}$ and $TM_{12}$ modes and compared with those by Vector Hankel Transform. While the $TM_{11}$ mode has a high Q, it is a poor radiating mode; the $TM_{12}$ mode is more suitable for antenna applications. It is also shown that the bandwidth of the $TM_{12}$ mode is wider than that of the $TM_{11}$ mode in terms of axial ratio for circular polarizatio

• 정보통신설비학회논문지
• /
• 제8권1호
• /
• pp.24-29
• /
• 2009

In this paper, we show the implementation of the low-cost RF transceiver module for parking control system. Super regenerative receiver scheme was adopted for this module due to its simplicity, low-cost, low power consumption and small number of components to improve reliability of the systems. For improving communication error rate by collision and in-band noise, dual-channel hopping scheme was adopted. Testing prototypes under the environment of simultaneous transmissions, we verified that the designed scheme is able to improve the success rate of data transmission of wireless parking control system cost effectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.981-983
• /
• 1998

In this paper, we present theoretical designs for a beam steering phased array antenna that uses a true time delay optical feeder. A variable true time delay is achieved by employing one tunable laser source and high dispersion fibers with different length. The wavelength tunable optical carrier propagation in a high-dipersion fiber realizes a true time delay, with the steering direction set by a single voltage controlling the wavelength. Beamsteering of a phased array antenna is obtained by controlling the tunable laser source. An employment of a high dispersion fiber response shows wide-band operation of beem steering antenna system.

• Journal of electromagnetic engineering and science
• /
• 제7권3호
• /
• pp.134-137
• /
• 2007

This paper presents the design of the compact UHF Bandpass filter of CT-type with a novel mixed coupling topology. In further detail, this new coupling structure mathematically equals the transmission zero that enables particularly the better rejection performance in the stopband without increasing the filter's order. To envision this design concept, we fabricated a microstrip filter whose measurement proves to agree with the predicted performance and the suggested coupling structure reduces the overall size, and will be possibly used in the miniaturized UHF apparatus such as the RFID system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.861-863
• /
• 2003

In this work, the preparations and characteristics of capacitors and inductors for RF IC as a integrated devices are investigated. These kinds of capacitors and inductors can be applicable to the passive components utilized in voltage controlled oscillator(VCO), low noise amplifier(LAN), mixer and synthesizer for mobile telecommunication of radio frequency band(900 MHz to 2.2GHz), and in a library of monolithic microwave integrated circuit(MMIC). The results show that these inductors and capacitors array for RF IC may be applicable to the RF IC passive components for mobile telecommunication.