• 한국항해항만학회지
• /
• 제27권6호
• /
• pp.631-638
• /
• 2003

Yaw-checking and course-keeping ability in IMO's ship manoeuvrability standards are reviewed from the viewpoint of safe navigation. Three kinds of virtual series-ships, which have different course instability, are taken as test models. The numerical simulation on Z-test is carried out in order to examine the correlation between known manoeuvrability in spiral characteristics and various kinds of overshoot angle. Then simulator experiments are executed with series-ships in a curved, narrow waterway by six operators(five active pilots and one ex-captain) in order to examine the correlation between known manoeuvrability and degree of manoeuvring difficulty. IMC criteria for yaw-checking and course-keeping ability are discussed and revised criteria are proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.206-209
• /
• 1999

Conventional target tracking techniques are primarily based on Kalman filtering or probabilistic data association(PDA). But it is difficult to perform well under a high cluttered tracking environment because of the difficulty of measurement, the problem of mathematical simplification and the difficulty of combined target detection for tracking association problem. This paper deals with an analysis of target tracking problem using fuzzy-logic theory, and determines fuzzy rules used by a fuzzy tracker, and designs the fuzzy tracker by using fuzzy rules and Kalman filtering.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권5호
• /
• pp.54-62
• /
• 1993

Generally, the main difficulty in the composition of tank-level control system may be in the point that plant parameters are severely varied according to the change of operating point. In order to cope with this difficulty, in this paper, an adaptive control is employed using model-following technique based on the optimal control law. Through the simulations and experiments the following results were observed. 1) The steady-state error was not found under the parameter variations caused by the change of operating point. 2) In spite of the change of operating point, the corresponding gains which were stored in the computer were found to be automatically updated so that the controller could have the adaptive ability. And also, the control specifications in view of transient response were found to be satisfied.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.107-110
• /
• 2005

After the sailing of WTO setup, The opportunity of a trade range extension is provided. OECD joining the change of the domestic construction industry. In 1994, The complete opening of a construction license was allowed As a result, The number of construction companies was increased rapidly. accordingly, We are faced with the new over competition and the problem of the financial difficulty. This paper proposes the plan for the practical technology of the small and middle sized construction companies to be improved and the plan for the working environment of small and middle sized construction companies to be improved. As a method for it, This paper proposes the Losicstics System of the construction.

• 경영과정보연구
• /
• 제2권
• /
• pp.311-334
• /
• 1998

By decreasing in CPU price and development of computer assembling technology, personal computer fake a good chance to accelerate its supply. Recently, as being introduced new computing technology so called multi media, teaming assist system which is based on single media such as studying book, cassette tape, video tape, or something else is rapidly being replaced by new assist education system based on multi media in which it is operated by the personal computer. In the computer assist education system, there is an evaluation module which appraise learner's study level into the next study strategy. At the view of this point, this part is very important. In this part, there are some factors like Importance, complexity, or difficulty which commonly include fuzzy factors in our surrounding. But until now, we are still out of the level to handle the evaluation module adequately among the some studies. In this study, we would like to suggest a new module that evaluate learning achievement of ICAI which have a variety of fuzzy environment. We combine Independent fuzzy environment like importance, complexity, difficulty into making total evaluation of learner's achievement. By the result, with expressing by linguistic form, this study can provide the theoretical basis in which we will be able to carry out sentence toward evaluation among elementary school.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.12-17
• /
• 2012

In order to produce high-quality optical components, aspheric lenses have been widely applied in recent years. An aspheric lens consists of aspheric surfaces instead of spherical ones, which causes difficulty in the design process as well as the manufacturing procedure. Although injection molding is widely used to fabricate optical lenses owing to its high productivity, there remains lots of difficulty to determine appropriate mold design factors and injection molding parameters. In the injection molding fields, computer simulation has been effectively applied to analyze processes based on the shell analysis so far. Considering the geometry of optical lenses, a full-3d simulation based on solid elements has been reported as a reliable approach. The present work covers three-dimensional injection molding simulation and relevant deformation analysis of an injection molded plastic lens based on 3d solid elements. Numerical analyses have been applied to the injection molding processes of three aspheric lenses for an image sensing module of a mobile phone. The reliability of the proposed approach has been verified in comparison with the experimental results.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.229-239
• /
• 2018

Purpose: There is a difficulty in Environmental Stress Screening (ESS) test design for weapon system's electrical/electronic components/products in small and medium-sized enterprises. To overcome this difficulty, I propose an easy ESS test design approach algorithm that is optimized with only one environment tolerance design information parameter (${\Delta}T$). Methods: To propose the mass production weapon system ESS test design for cost-effective optimization, I define an optimum cost-effective mathematical model ESS test algorithm model based on modified MIL-HDBK-344, MIL-HDBK-2164 and DTIC Technical Report 2477. Results: I clearly confirmed and obtained the quantitative data of ESS effectiveness and cost optimization along our ESS test design algorithm through the practical case. I will expect that proposed ESS test method is used for ESS process improvement activity and cost cutting of mass production weapon system manufacturing cost in small and medium-sized enterprises. Conclusion: In order to compare the effectiveness of the proposed algorithm, I compared the effectiveness of the existing ESS test and the proposed algorithm ESS test based on the existing weapon system circuit card assembly for signal processing. As a result of the comparison, it was confirmed that the test time was reduced from 573.0 minutes to 517.2minutes (9.74% less than existing test time).

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.143-148
• /
• 2008

In order to produce high-quality optical components, aspheric lenses have been widely applied in recent years. An aspheric lens consists of aspheric surfaces instead of spherical ones, which causes difficulty in the design process as well as the manufacturing procedure. Although injection molding is widely used to fabricate optical lenses owing to its high productivity, there remains lots of difficulty to determine appropriate mold design factors and injection molding parameters. In the injection molding fields, computer simulation has been effectively applied to analyze processes based on the shell analysis so far. Considering the geometry of optical lenses, a full-3d simulation based on solid elements has been reported as a reliable approach. The present work covers three-dimensional injection molding simulation and relevant deformation analysis of an injection molded plastic lens based on 3d solid elements. Numerical analyses have been applied to the injection molding processes of three aspheric lenses for an image sensing module of a mobile phone. The reliability of the proposed approach has been verified in comparison with the experimental results.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 2005년도 27회 하계학술발표회 논문집
• /
• pp.24-43
• /
• 2005

On industry highly developed and competition with each company, technology is considered as the one of the most significant variables in the era of technology competition. So, the needs of technology valuation and valuating technology competitiveness are increasing to measure value of company. However, in many cases of valuation tools, elaborate valuation technique is required all the more by reason of difficulty of defining the valuation target, the valuation perspective and the purpose of valuation. This study tried to define valuation framework of technology competitiveness for technology intensive small medium venture company to valuate technology environment and company's capability related with technology synthetically as well as technology itself which company uses. And also the purpose of technology valuation, the purpose of technology competitiveness, basic elements of technology valuation, trend of technology valuation in major countries including Korea are presented and analyzed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.120-123
• /
• 1999

The precision cold forging process for steering yoke of automobile has been analysed by using rigid-plastic finite element analysis code DEFORM-3D Also the experiment has been performed through the optimized process. Until now steering yoke has been largely manufactured by hot forging or welding of forged head and shaft parts because of technical difficulty. the study has shown successful results of the precision cold forging through the proper selection of the process.