• Korean journal of food and cookery science
• /
• v.32 no.4
• /
• pp.517-523
• /
• 2016

Purpose: This study examined the food composition of four raw and boiled domestic potato cultivars: Superior, Dejima, Bora Valley and Rose. Methods: Proximate composition (moisture, protein, ash, dietary fiber and fat), minerals (calcium, phosphorus, iron, potassium, sodium and magnesium) and vitamins (thiamine, riboflavin and niacin) were analyzed in the study. Results: In this study, it was observed that the moisture contents of raw and boiled Bora Valley potato were 83.74 g/100 g and 81.57 g/100 g, respectively, which was highest among the studied cultivars. The protein content of the raw and boiled Rose potato (12.23 g/100 g and 11.02 g/100 g) was higher than that of the other cultivars. Protein contents of boiled Bora Valley and Rose potatoes were significantly lower than those of their respective raw samples. The potassium, phosphorus and sodium contents of Bora Valley potato were 2,397.69 mg/100 g, 389.13 mg/100 g and 14.12 mg/100 g, respectively. In case of raw potato, the calcium, iron and magnesium contents of Dejima potato were 51.52 mg/100 g, 3.21 mg/100 g and 137.62 mg/100 g, respectively, which were the highest values among the tested potato cultivars. Total dietary fiber content of Dejima potato was 14.78 g/100 g, which was the highest level. The dietary fiber contents of four cultivars of potatoes were lower after boiling. Thiamine content was highest in the Bora Valley potato (0.43 mg/100 g). Riboflavin contents of the Rose potato was 0.35 mg/100 g, which was higher than that of the others. Conclusion: Overall, four cultivars of raw and boiled potatoes had enhanced food composition. Therefore, these potato cultivars are expected to be highly valuable food items for the development and application of functional foods.

• Membrane Journal
• /
• v.28 no.5
• /
• pp.368-377
• /
• 2018

The n-nitrilotris(methylene) phosphonic acid (NTPA) potassium salt was synthesized as a draw solute for forward osmosis. NTPA-4K, NTPA-5K and NTPA-6K were synthesized by varying the content of KOH added to NTPA and confirmed by $^1H$-NMR and $^{13}C$-NMR. The osmotic pressure, viscosity, water flux and reverse salt flux were measured to characterize the draw solute. In the forward osmosis process when distilled water was used as a feed solution and 0.5 M of NTPA-4K, NTPA-5K and NTPA-6K were used as a draw solution, the water flux was 35.8, 38.8 and 42.2 LMH, the reverse salt flux was 5.4, 6.9 and 7.4 gMH, respectively. It was confirmed that the water flux was lower than the conventional NaCl draw solution, but the reverse salt flux was much lower. In order to recover the diluted draw solution, nanofiltration was conducted. The results showed that the draw solute could be retained by above 90%.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.27-35
• /
• 2021

Recently, as a solution to the sharp drop in "power reserve ratio", it is being converted to a microgrid that enables bi-directional transmission and distribution. A microgrid is composed of a small-scale distributed power supply and a load. As a representative technology of distributed power generation, there is a Micro Combined Heat and Power system applied to homes and buildings. In this study, a safety standard was developed by dividing the power generation system, cooling system, lubrication system, and exhaust system to derive safety standards for a small gas engine power generation system with a gas consumption less than 232.6kW (200,000 kcal/h). In the case of the power generation system, a filter was installed and the system was stopped by detecting gas leakage and abnormalities in engine speed or output and the cooling system is stipulated to stop the system in case of insufficient cooling water or overheating. The lubrication system monitors the pressure and temperature of the lubricating oil and stops the system when an abnormality occurs, and the exhaust gas emission concentration regulation value was specified in accordance with domestic and foreign standards. Through the results of this study, it is judged that the safety of the gas engine power generation system can be improved and it can contribute to the commercialization of products.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.3
• /
• pp.111-127
• /
• 2019

The "fourth industrial revolution" is changing society as a whole. Public innovation is needed to enhance national competitiveness. Amid these times' demands, the "maker movement," a new form of DIY movement that has revived since 2000, is regarded as a "popular innovation activity" that can respond to changing needs. In particular, "Makerspace," a significant activity area for the maker's movement, is drawing attention as a place where "Maker" shares each other's knowledge and resources, and share results. Makerspace has recently expanded its functions into a 'public innovation platform' or (preparation) start-up preparation space for start-ups. South Korea has also supported various types of "Makerspace" since 2010 as a policy for fostering an innovation base. The Ministry of Small and Medium Venture Business has been pushing for expansion of Makerspace since 2018 and is providing support by dividing it into "general rap" and "professional wrap" and "zero to Maker" spaces for novice makers in the beginning and necessary stages of makers, while "professional rap" is divided into "Maker to Maker" spaces for professionals. This study is about Makerspace, space where makers are active among the topics related to manufacturers. Thus, in this study, significant domestic and international studies related to Makerspace have been investigated so far, and trends in related studies have analyzed. Based on this, the research needs and specifics of Makerspace, which has recently expanded its role and functions. In particular, the Commission intends to present the need for research on Makerspace and specific areas of study from a start-up management perspective to promote qualitative growth of Makerspace, which is changing into a popular innovation platform in the era of the fourth industry, and inducing a start-up management interest in new manufacturing industry types.

• Korean small business review
• /
• v.43 no.4
• /
• pp.173-209
• /
• 2021

Start-up accelerators are a new type of investor that provide mentoring, education and seed capital to start-ups for a fixed duration and receive a certain stake in them in return. They help start-ups achieve successful commercialization. With increase in performance visibility, the number of private and public sector accelerators rose across domestic and international markets. Private sector accelerators are established and operated by private entities while public sector accelerators are established and operated by the government. Both play complementary roles that are becoming increasingly important to start-ups. Therefore, this study aims to examine the differences in major operational goals and investment determinants between private and public sectors and to understand their implications. The results show that the private sector prioritizes profit generation through the investment, while the public sector aims to contribute to the development of high-growth start-ups, and create region-specific and technology-specific start-up ecosystems. Additionally, both groups consider customer needs the most important determinant. Public groups are more conservative in investments and tend to place importance on objective indicators such as patents, partners, mentors, and co-founders. Conversely, private groups value the capabilities of founders and their ease of collaboration with accelerators. These findings can help start-ups get support from public or private accelerators more easily. It will also help public and private accelerators refine the criteria for selecting start-ups.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.190-211
• /
• 2022

This study investigated the effect of the shape and height of road signs on detection performance when detecting road signs with LiDAR, which is recognized as an essential sensor for autonomous vehicles. For the study, four types of road signs with the same area and material and different shapes were produced, and a road driving test was performed by installing a 32Ch rotating LiDAR on the upper part of the vehicle. As a result of comparing the shape of the point cloud and the NPC according to the shape of the road sign, It is expected that a distance of less than 40m is required to recognize the overall shape of a road sign using 32Ch LiDAR, and shapes such as triangles and rectangles are more advantageous than squares in securing the maximum point cloud from a long distance. As a result of the study according to the height of the road sign, At short distances (within 20m), if the height of the sign is raised to more than 2m, it deviates from the vertical viewing angle of the LiDAR and cannot express the complete point cloud shape. However, it showed a negligible effect compared to the near-field height change. These research results are expected to be utilized in the development of road facilities dedicated to LiDAR for the commercialization of autonomous cooperative driving technology.

• Journal of Platform Technology
• /
• v.11 no.3
• /
• pp.83-97
• /
• 2023

This research aims to identify startup trends by analyzing a large number of news articles through semantic network analysis. Using the BIGKinds article analysis service provided by the Korea Press Foundation, 330,628 news articles from 19 newspapers from January 2013 to December 2022 were comprehensively analyzed. The study focused on exploring the changes in key issues over the past decade, considering the impact of the social environment and global economic trends on entrepreneurship. We compared the number of news articles and changes in issues before and after the COVID-19 pandemic, and visualized entrepreneurship trends through frequency analysis, relationship analysis, and correlation analysis. The results of the study showed that the top keywords for entrepreneurship-related words are startup activation and commercialization, and the correlation between COVID-19 and entrepreneurship keywords is almost negligible in a linear sense, but the number of news articles decreased during the pandemic, which has an impact. In particular, the most frequently mentioned keywords are Ministry of SMEs and Startups, place is the United States, and person is limited. The agency was the SBA, and the entrepreneurship sector is more affected by social issues than any other sector, with the important characteristics of increased frequency of prompt access. This study supplies essential basic data for understanding and exploring issues and events related to entrepreneurship and suggests future research topics in the field.

• Journal of Applied Biological Chemistry
• /
• v.65 no.1
• /
• pp.7-15
• /
• 2022

Volatile and non-volatile metabolite profiles of sugar-immersed raspberry liquid during different storage periods were analyzed and comparative analysis with their general characteristics, antioxidant activity, and sensory quality was evaluated to better understand the effect of the storage period on the quality of ugar-immersed raspberry liquid. During storage, a browning reaction occurred, resulting in a change in color and the production of volatile compounds. At the beginning of storage, sucrose was completely decomposed into fructose and glucose, and the sweetness was rapidly reduced, but the increase in succinic acid increased the sour taste. Most volatile compounds increased with an increase of the storage period, and especially, the contents of citronellol, octanoic acid, and hexanoic acid, which are known as antioxidants, showed the highest content in 10 day-sample, showing the highest antioxidant activity at this time. Although a further study on bacterial profiles and browning reaction during the storage will be needed, the results of this study showed that the quality of sugar-soaked raspberry extract was significantly affected by the storage period and can be used as basic data for commercialization of ugar-immersed raspberry liquid.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.205-205
• /
• 2022

Sorghum (Sorghum bicolor L.) is a major cereal grain crop of the world and It can be cultivated under high temperature and dry condition with high adaptability to the adverse environment. It is usually eaten with rice in korea and most of domestic sorghum cultivars have been developed by pure line selection and cross breeding. In prior studies, Hybrid cultivar (F1 seed) was known to improve 30-40% in yield and resist to disease and pest than pure line varieties due to hybrid vigor. Therefore, study on the hybrid sorghum is continuously necessary. In korea, hybrid sorghum cultivar have been developed, so we need to find methods seed production technology for supply and commercialization of hybrid seed cultivar. Female inbred line(A-line) and male inbred line(R-line) are needed for hybrid seed production. This study was carried out to investigate growth characteristics and yield of hybrid sorghum according to the seedling period and planting rate between female inbred line(YSA1) and male inbred line (Sodamchal, Miryang 19). When the flowering period of two inbred groups in the process of hybrid seed production is coincides, hybrid seed production is increase. The female inbred line and male inbred lines were cultivated at Daegu in 2021. Two inbred lines were sown at intervals of 3 days and 7days and were evaluated flowering period. As a result, the flowering period of the female inbred line and male inbred lines were matched at the 7days interval. To find out optimal planting rate, two inbred lines were cultivated under different plating rate (4:2, 5:2, 6:2). Yield of YSA1/Sodamchal(F1) was the highest 130(kg/10a) in the 4:2 ratio and yield of YSA1/Miryang 19 was the highest quantity of 139(kg/10a) in the 6:2 ratio. The results of this study could be helpful for hybrid Sorghum seeds production.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.80-86
• /
• 2024

This study was conducted to evaluate the potential of rape stalk (RAS) as a raw material for the production of solid bio-fuels. RAS was immersed in an aqueous solution with acetic acid concentration of 1 percent, The content of reducing sugars separated from the RAS was analyzed. Glucose showed the highest content followed by xylose, galactose, arabinose and mannose. The immersed and non-immersed RAS were used for producing pellets with a pilot-scaled flat-die pellet mill. Bulk density and calorific values of the pellets improved with the use of the immersed RAS and the addition of wood particles. The values exceeded the minimum requirements for the A-grade of non-woody pellets (≧600 kg/m³ & ≧ 14.5 MJ/kg) designated by the ISO. Ash content of the pellets reduced with the immersion of RAS and the value satisfied the A-grade level (≦6.0%) of the ISO standard. The durability of the immersed RAS-based pellets was much higher than that of non-immersed IRS-based pellets, and the values were increased with the addition of wood particles. However, the durability did not meet the acceptance level for the B-grade of non-woody pellets (≧96.0%) designated by the ISO. These results suggested that the addition of binders in the production of non-woody pellets using an RAS immersed in acetic acid-based aqueous solution is required for the commercialization of the pellets.