• 제목/요약/키워드: Technology Transfer Performance Index

검색결과 31건 처리시간 0.035초

교수역량이 기술이전에 미치는 영향에 대한 실증분석: 전남대학교 사례를 중심으로 (An Empirical Study of the Impact of Professor's Capability on Technology Transfer based on the case of Chonnam National University)

  • 김동문;김은희;나혜인
    • 기술혁신연구
    • /
    • 제22권4호
    • /
    • pp.1-19
    • /
    • 2014
  • 본 연구는 교수의 연구 활동과 성과를 바탕으로 교수의 역량이 대학의 기술이전 성과에 미치는 영향력 분석을 목적으로 한다. 이를 위해서 기술이전 경험이 있는 이공계 분야 교수 80명의 개별 데이터를 수집하여 논문 질적 수준, 특허활동, 정부지원 연구비 규모, 민간 연구비 규모, 임용 전 산업체 경력, 임용 후 경력, 연구팀 규모가 기술이전 성과에 미치는 영향을 분석하였다. 주요 연구 결과로 대학에서 교수의 특허활동, 민간 연구비 규모, 교수 임용 후 경력이 기술이전에 영향을 주는 요인으로 분석되었다.

공공연구부문에서의 기술이전컨소시엄의 효과와 특성 연구: 공공기술이전컨소시엄 사례를 중심으로 (Effectiveness and characteristics of technology transfer consortia in public R&D sector: The case of Korean TT consortia)

  • 박종복;류태규
    • 기술혁신학회지
    • /
    • 제10권2호
    • /
    • pp.284-309
    • /
    • 2007
  • 본 연구는 2002년부터 5년간 운영된 권역별 공공기술이전컨소시엄의 실증분석을 통하여 기술이전컨소시엄의 유효성과 주요 특성요인을 살펴보고자 한다. 유효성 검정은 기술이전프로세스를 토대로 하여 개발된 기술이전효율성지수가 컨소시엄의 운영기간 동안 변화한 정도로 판단하였고, 특성요인의 탐색은 기술이전 메커니즘 연구의 핵심변수인 가입동기, 촉진요인, 장애요인 및 극복과제를 사용하여 이루어졌다. 그 결과, 기술이전컨소시엄에 참여한 대학 또는 정부연구기관의 기술 이전효율성지수가 참여하지 않은 기관에 비하여 더욱 큰 증가를 보였으며, 조사된 특성요인들도 컨소시엄의 직접참여자 그룹과 간접참여자 그룹간에 인식 차가 거의 없는 것으로 판명되었다. 본 연구는 기술이전컨소시엄이 새로운 기술이전 메커니즘으로서의 유의미성과 공통적 특성을 갖는지를 탐색해 보았다는 것에 그 의의가 있다.

  • PDF

STUDY ON THE OPTIMAL DESIGN OF A VEHICLE INTAKE SYSTEM USING THE BOOMING NOISE AND THE SOUND QUALITY EVALUATION INDEX

  • LEE J. K.;PARK Y. W.;CHAI J. B.
    • International Journal of Automotive Technology
    • /
    • 제7권1호
    • /
    • pp.43-49
    • /
    • 2006
  • In this paper, an index for the evaluation of a vehicle intake booming noise and intake sound quality were developed through a correlation analysis and a multiple factor regression analysis of objective measurement and subjective evaluation data. At first, an intake orifice noise was measured at the wide-open throttle test condition. And then, an acoustic transfer function between intake orifice noise and interior noise at the steady state condition was estimated. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 intake noise and vibration expert evaluators. Next, the correlation analysis between the psychoacoustic parameters derived from the measured data and the subjective evaluation was performed. The most critical factor was determined and the corresponding index for intake booming noise and sound quality are obtained from the multiple factor regression method. And, the optimal design of intake system was studied using the booming noise and the sound quality evaluation index for expectation performance of intake system. Conclusively, the optimal designing parameters of intake system from noise level and sound quality whose point of view were extracted by adapting comparative weighting between the booming noise and sound quality evaluation index, which optimized the process. These work could be represented guideline to system engineers, designers and test engineers about optimization procedure of system performance by considering both of noise level and sound quality.

AHP를 활용한 중소기업 R&D 성과평가 관련 연구 -이전기술개발사업을 중심으로- (Study on the evaluate the achievements about R&D of SME's using the AHP : Transfer of technology development project)

  • 장영순;노동기;서종현
    • 대한안전경영과학회지
    • /
    • 제18권1호
    • /
    • pp.209-217
    • /
    • 2016
  • This study with the aim to develop a system that can be objectively measured and evaluated as a scientific support and of R&D. To this end, this study aimed at companies participating in the development of national technology transfer support program for SMEs examined the factors affecting performance. By developing metrics that meet the business objectives refer to the applicable national and international case studies and literature reviews, etc. In order to achieve the systematization of technology evaluation index, which was selected indicators. To evaluate the weight through the duality comparing selected indicators in order to take advantage of the AHP analysis conducted targeted surveys.

Inner Beam의 두께비 및 높이비가 LMTT용 Shuttle Car의 Frame 강도 및 강성에 미치는 영향 (DThe Effect of Thickness Ratio and Hight Ratio of Inner Beam on Strength and Stiffness of Frame in Shuttle Car for LMTT)

  • 한동섭;한근조;이권순;심재준;김태형
    • 한국항해항만학회지
    • /
    • 제28권3호
    • /
    • pp.207-211
    • /
    • 2004
  • LMTT(Linear Motor-based Transfer Technology)는 항만 자동화를 위한 컨테이너 터미널용 수평 이송 장치이며, rail과 shuttle car(mover)에 부착된 stator module로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다. 본 논문은 inner beam과 outer beam의 높이비가 LMTT용 shuttle car의 frame 강도 및 강성에 미치는 영향을 살펴보았다. 설계변수는 inner beam의 단면형상 및 높이비로 설정하였으며, 유한요소해석을 통하여 설계변수가 frame의 강도 및 강성에 미치는 영향을 살펴보았다.

Control of Age-Dependent Population Systems

  • Mimura, A.;Kubo, S.;Kunimatsu, N.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.433-438
    • /
    • 2004
  • In this paper, we at first describe the linear age-dependent population system. In addition, we introduce the nonlinear population system. Using these age-dependent population systems, we evaluate the stability of these age-dependent population systems and determine the optimal birth rates that realize a target distribution which relaxes an aging population. In this paper, we focus on Japan's population and we use the amount of demographic statistics of Japan in year 2000.

  • PDF

피인용 특성 분석을 통한 출연(연) 임무중심형 기관평가의 질적 성과평가 개선 방향 (Developments of Evaluation System for Qualitative Performance Measurement in Government-Supported Research Institute by Article Citation Method)

  • 이문영;이찬구
    • 기술혁신학회지
    • /
    • 제19권4호
    • /
    • pp.768-798
    • /
    • 2016
  • 본 연구는 과학기술계 정부출연 연구기관 평가에서 논문의 질적 평가를 위해 새로 도입된 피인용도 지표가 성과지표의 구성요건 중 적시성을 충족할 수 있는가라는 문제의식에서 출발하였다. 이에 피인용 반감기와 즉시성 지수 등 논문의 주기적 특성을 분석 활용하여 실질적인 질적 성과체계로 전환하기 위한 기관평가의 개선방향을 제시하고자 한다. 연구 결과는 기술의 발달과 의존성이 높아짐에 따라 학문의 변화속도 또한 빠르게 변화하고 있으나, 공공기술은 타 분야에 비해 인용속도가 느리고, 산업과 연관된 분야는 지식이전 속도가 빠른 것으로 분석되고 있다. 또한, 학문분야 특성에 따른 피인용 주기는 차이가 없었으며, 각 분야의 질적으로 우수한 논문의 평가 시 피인용 지수의 타당성을 확보하기 위해서는 6년 정도의 기간이 누적된 데이터가 필요한 것으로 분석되었다. 분야별 질적 성과평가를 위해 필요한 피인용의 시간적 특성을 기술통계적으로 도출한 결과를 반영하여 임무중심형 연구기관 평가의 문제점을 도출하였다. 이를 개선하기 위한 객관적이고 타당한 질적 평가를 위한 정책적 개선방향을 제시하였다.

Classification Index and Grade Levels for Energy Efficiency Classification of Agricultural Dryers in Korea

  • Shin, Chang Seop;Park, Jin Geun;Kim, Kyeong Uk
    • Journal of Biosystems Engineering
    • /
    • 제39권2호
    • /
    • pp.96-100
    • /
    • 2014
  • Purpose: The objective of this study was to develop a classification index and the grade levels for a five-grade energy efficiency classification of agricultural dryers in Korea. Methods: The classification index and the grade levels were determined by using the performance test data published by the FACT over the last eight years to reflect a state of the art technology for agricultural dryers in Korea. The five grades were designed to have the classified dryers distributed normally over the grades with 15% for the $1^{st}$ grade, 20% for the $2^{nd}$ grade, 30% for the $3^{rd}$ grade, 20% for the $4^{th}$ grade and 15% for the $5^{th}$ grade. Results: The classification index was defined as the total amount of fuel and electrical energy consumed per 1% of the wet basis moisture content evaporated from a unit mass of grain or agricultural crops during the drying process: 1 MT of paddy rice for grain dryers and 1 kg of red pepper for agricultural crop dryers as the standard mass. Conclusions: The grade levels for the five-grade energy efficiency classification of grain dryers, kerosene dryers, and electric dryers were proposed in terms of the classification index value.

피인용 특성 분석을 통한 출연(연) 임무중심형 기관평가 개선 방향 (Developments of Evaluation System of Mission Oriented Government-Supported Research Institute by Article Citation Method)

  • 이문영;이찬구
    • 한국기술혁신학회:학술대회논문집
    • /
    • 한국기술혁신학회 2016년도 춘계학술대회 논문집
    • /
    • pp.404-430
    • /
    • 2016
  • 본 연구는 과학기술계 정부출연 연구기관 평가에서 논문의 질적 평가를 위해 새로 도입된 피인용도 지표가 성과지표의 구성요건 중 적시성을 충족할 수 있는가라는 문제의식에서 출발하였다. 이에 피인용 반감기와 즉시성 지수 등 논문의 주기적 특성을 분석 활용하여 실질적인 질적 성과체계로 전환하기 위한 기관평가의 개선방향을 제시하고자 한다. 연구 결과로 기술의 발달과 의존성이 높아짐에 따라 학문의 변화속도 또한 빠르게 변화하고 있으나, 공공기술은 타 분야에 비해 인용속도가 느리고, 산업과 연관된 분야는 지식이전 속도가 빠른 것으로 분석되었다. 또한, 학문분야 특성에 따른 피인용 주기는 차이가 없었으며, 각 분야의 질적으로 우수한 논문의 평가 시 피인용 지수의 타당성을 확보하기 위해서는 6년정도의 기간이 누적된 데이터가 필요한 것으로 분석되었다. 분야별 질적 성과평가를 위해 필요한 피인용의 시간적 특성을 기술통계적으로 도출한 결과를 반영하여 임무중심형 연구기관 평가의 문제점을 도출하였다. 이를 개선하기 위한 객관적이고 타당한 질적 평가를 위한 정책적 대안을 평가주기적, 평가기준적, 평가관리적 관점으로 제시하였다.

  • PDF

현장중심의 건설가설기술요소 분류체계 구축 (Development on Breakdown Structure of Construction Site centered Construction Temporary Technology Index)

  • 박준모;김옥규
    • 한국건설관리학회논문집
    • /
    • 제15권4호
    • /
    • pp.77-85
    • /
    • 2014
  • 건설가설공사는 타워크레인, 리프트와 같은 가설양중설비나 사무소, 창고, 시험소 등의 가설건축물 및 각종 작업에서 사용되는 비계, 작업발판, 동바리, 거푸집 등을 일시적으로 조립, 설치하여 사용하고 공사가 완료된 후에는 철거하는 건설공사의 주요 과정인 동시에 핵심공종이다. 새로운 요구사항에 대한 건설현장의 발 빠른 대응과는 달리 국내의 건설가설분야의 기술체계는 실무에서 효용성이 낮아 개선이 필요한 실정이다. 이에 본 연구에서는 기존 기술체계와 현업에서 활용되고 있는 새로운 기술과 기법 등을 정리하고, 현장관리자의 의견과 검토를 통한 가설기술의 기초가 되는 기술요소의 분류체계를 구축하였다. 이를 바탕으로 향후 건설가설기술요소에 대한 성능과 활용성에 대한 연구를 통하여 지식정보체계로 거듭날 수 있도록 개선해 나갈 예정이다.