• 한국정보통신학회논문지
• /
• 제19권10호
• /
• pp.2301-2306
• /
• 2015

정보가 급증함에 따라 큰 용량의 데이터를 전송해야 할 경우가 있다. 빅 데이터 전송 기술은 큰 용량의 데이터를 전송할 때 필요하다. 본 논문은 빅 데이터를 최적화된 속도로 전송하기 위해 GridFTP의 주된 기능인 PCP를 사용하며 또한 PCP 값을 예측하는 알고리즘을 개발한다. 또한, TSK 퍼지 모델을 적용하여 PCP에 따른 최적화된 전송률을 측정하는데 사용된다. 따라서, 제안된 TSK모델을 이용한 PCP 예측 알고리즘은 본 논문의 우수성을 입증한다.

• Wind and Structures
• /
• 제29권1호
• /
• pp.65-75
• /
• 2019

A heated square cylinder (with height $A^*$) is kept parallel to the cold wall at a fixed gap height $0.5A^*$ from the wall. Another adiabatic rectangular cylinder (of same height $A^*$ and width $0.5A^*$) is placed upstream in an inline tandem arrangement. The spacing between the two cylinders is fixed at $3.0A^*$. The inlet flow is taken as Couette-Poiseuille flow based non-linear velocity profile. The conventional fluid (also known as base fluid) is chosen as water (W) whereas the nanoparticle material is selected as $Al_2O_3$. Numerical simulations are performed by using SIMPLE algorithm based Finite Volume approach with staggered grid arrangement. The dependencies of hydrodynamic and heat transfer characteristics of the cylinder on non-dimensional parameters governing the nanofluids and the fluid flow are explored here. A critical discussion is made on the mechanism of improvement/reduction (due to the presence of the upstream cylinder) of heat transfer and drag coefficient, in comparison to those of an isolated cylinder. It is observed that the heat transfer increases with the increase in the non-linearity in the incident velocity profile at the inlet. For the present range studied, particle concentration has a negligible effect on heat transfer.

• Nuclear Engineering and Technology
• /
• 제22권4호
• /
• pp.326-336
• /
• 1990

최근 수행된 일련의 실험들을 통하여 핵연료 집합체 지지격자(Spacer Grid)의 존재가 냉각재상실사고시에 핵연료봉으로부터의 열제거에 긍정적인 효과를 미치고 있음이 밟혀졌다. 그 이유는 열원이 없는 지지격자가 연료봉보다 먼저 ？칭이 일어나며 물방울이 지지격자에 부딪쳐서 잘게 부수어져 증발이 쉽게 일어나게 되고 또한 난류효과를 증대시키는 요인이 되기 때문이다. 따라서 냉각재상실사고의 진행 과정에서 첨두피복관온도가 발생하는 재관수 구간의 수면 위쪽에서 유지되는 DFFB에서의 정확한 열전달을 계산하기 위해서는 이들의 고려가 필요하다. 본 논문에서는 DFFB에서 지지격자의 존재로 인해 물방울이 잘게 부수어져 증발이 쉽게 이루어지도록 하는 Droplet Breakup Model을 냉각재상실사고 최적해석 코드인 RELAP5/MOD2에 삽입하였다. 재관수 구간에서 지지격자의 영향을 체계적으로 조사한 FEBA실험에 대해서 검증계산을 수행하여 실험자료와 비교하였다.

• 한국결정성장학회지
• /
• 제27권2호
• /
• pp.75-79
• /
• 2017

고밀도 플라즈마 식각 및 lift-off 두 가지 공정으로 honeycomb 형상의 Ag-grid 투명전극층을 제작하였고 제조 공법에 따른 광학적 및 전기적 특성을 비교하였다. 플라즈마 식각 조건 선정을 위하여 Ag 박막의 $10CF_4/5Ar$ 유도결합 플라즈마 식각특성을 조사하였다. 비교적 낮은 ICP source power 또는 rf chuck power 영역에서는 power 증가에 따라 Ag 식각속도가 증가하였고, 높은 power 조건에서는 $Ar^+$ 이온 에너지 감소 또는 $Ar^+$ 이온에 의한 F radical 제거로 인해 식각속도가 감소하였다. $10CF_4/5Ar$ 플라즈마 식각 공정에 의해 제작된 Ag-grid 전극층은 lift-off 공정으로 제작된 전극층에 비해 grid 패턴 형상의 왜곡이나 단절이 없는 더 우수한 grid 패턴 전사 효율과 가시광선 영역에서 더 높은 83.3 %(pixel 크기 $30{\mu}m$/선폭 $5{\mu}m$)와 71 %(pixel 크기 $26{\mu}m$/선폭 $8{\mu}m$)의 광투과율을 각각 나타내었다. 반면에 lift-off 공정으로 제작된 Ag-grid 전극층은 플라즈마 식각 공정 시편보다 더 우수한 $2.163{\Omega}/{\square}$(pixel 크기 $26{\mu}m$/선폭 $8{\mu}m$)과 $4.932{\Omega}/{\square}$(pixel 크기 $30{\mu}m$/선폭 $5{\mu}m$)의 면저항 특성을 나타내었다.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.302-311
• /
• 2016

This paper proposes a hybrid ESS that integrates an energy storage system (ESS) with an uninterruptible power supply (UPS). The hybrid ESS has a demand management and emergency power supply function while increasing the battery utilization of the UPS, which has just been used in a power failure. In addition to the critical load, the proposed system augments the capacity of emergency generation using an additional load, which has voltage and frequency-dependent characteristics to the grid side. The control algorithm of the AC-DC converter and bidirectional DC-DC converter is proposed for demand management and emergency power supply. Furthermore, seamless and autonomous transfer methods to alleviate the transient during mode transfer are proposed. To validate the proposed control scheme, experimental results from a 5 kW prototype are provided.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3207-3216
• /
• 2021

Three-dimensional structures of a vortical flow field and heat transfer characteristics in a partially blocked 7-pin fuel assembly mock-up of sodium-cooled fast reactor have been investigated through a numerical analysis using a commercial computational fluid dynamics code, ANSYS CFX. The simulation with the SST turbulence model agrees well with the experimental data of outlet and cladding wall temperatures. From the analysis on the limiting streamline at the wall, multi-scale vortexes developed in axial direction were found around the blockage. The vortex core has a high cladding wall temperature, and the attachment line has a low cladding wall temperature. The small-scale vortex structures significantly enhance the convective heat transfer because it increases the turbulent mixing and the turbulence kinetic energy. The large-scale vortex structures supply thermal energy near the heated cladding wall surface. It is expected that control of the vortex structures in the fuel assembly plays a significant role in the convective heat transfer enhancement. Furthermore, the blockage plate and grid spacer increase the pressure drop to about 36% compared to the bare case.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.547-557
• /
• 2018

This work proposes a control method of frequency stabilization for grid integration of large-scale wind farms via the voltage source converter-based high-voltage direct current (VSC-HVDC) technology. First, the topology of grid integration of a large-scale wind farm via the VSC-HVDC link is provided, and simple control strategies for wind turbines, wind farm side VSC (WFVSC), and grid side VSC are presented. Second, a mathematical model between the phase angle of WFVSC and the frequency of the wind farm is established. The control principle of the large-scale wind power integrated system is analyzed in theory in accordance with the mathematical model. Third, frequency and AC voltage controllers of WFVSC are designed based on the mathematical model of the relationships between the phase angle of WFVSC and the frequency of the wind farm, and between the modulation index of WFVSC and the voltage of the wind farm. Corresponding controller structures are established by deriving a transfer function, and an optimization method for selecting the parameters of the frequency controller is presented. Finally, a case study is performed under different operating conditions by using the DIgSILENT/PowerFactory software. Results show that the proposed control method has good performance in the frequency stabilization of the large-scale wind power integrated system via the VSC-HVDC technology.

• 한국표면공학회지
• /
• 제48권4호
• /
• pp.158-162
• /
• 2015

To substitute indium tin oxide (ITO), many substituents have been studied such as metal nanowires, carbon based materials, 2D materials, and conducting polymers. These materials are not good enough to apply to an electrode because theses exhibit relatively high resistance. So metal grids are required as an additionalelectrode to improve the conductivities of substituents. The metal grids were printed by electrohydrodynamic printing system using Ag nanoparticle based ink. The Ag grids showed high uniformity and the line width was about $10{\mu}m$. The Ag nanoparticles are surrounded by dispersants such as unimolecular and polymer to prevent aggregation between Ag nanoparticles. The dispersants lead to low conductivity of Ag grids. Thus, the sintering process of Ag nanoparticles is strongly recommended to remove dispersants and connect each nanoparticles. For sintering process, the interface and microstructure of the Ag grid were controlled in 1.0 torr Ar atmosphere at aound $400^{\circ}C$ of temperature. From the sintering process, the uniformity of the Ag grid was improved and the defects on the Ag grids were reduced. As a result, the resistivity of Ag grid was greatly reduced up to $5.03({\pm}0.10){\times}10^{-6}{\Omega}{\cdot}cm$. The metal grids embedded substrates containing low pressure Ar sintered Ag grids showed 90.4% of transmittance in visible range with $0.43{\Omega}/{\square}$ of sheet resistance.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.915-924
• /
• 2016

After a severe accident to the nuclear reactor, the in-vessel retention strategy is a key way to prevent the leakage of radioactive material. Nanofluid is a steady suspension used to improve heat-transfer characteristics of working fluids, formed by adding solid particles with diameters below 100nm to the base fluids, and its thermal physical properties and heat-transfer characteristics are much different from the conventional working fluids. Thus, nanofluids with appropriate nanoparticle type and volume concentration can enhance the heat-transfer process. In this study, the moving particle semi-implicit method-meshless advection using flow-directional local grid method is used to simulate the bubble growth, departure, and sliding on the downward-facing heating surface in pure water and nanofluid (1.0 vol.% $Al_2O_3/H_2O$) flow boiling processes; additionally, the bubble critical departure angle and sliding characteristics and their influence are also investigated. The results indicate that the bubble in nanofluid departs from the heating surface more easily and the critical departure inclined angle of nanofluid is greater than that of pure water. In addition, the influence of nanofluid on bubble sliding is not significant compared with pure water.

• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.360-368
• /
• 2017

This paper proposes the 80-kW high-efficiency bidirectional hybrid SiC boost/buck converter using droop control for DC nano-grid. The proposed converter consists of four 20-kW modules to achieve fault tolerance, ease of thermal management, and reduced component stress. Each module is constructed as a cascaded structure of the two basic bi-directional converters, namely, interleaved boost and buck converters. A six-pack hybrid SiC intelligent power module (IPM) suitable for the proposed cascaded structure is adopted for high-efficiency and compactness. The proposed converter with hybrid switching method reduces the switching loss by minimizing switching of insulated gate bipolar transistor (IGBT). Each module control achieves smooth transfer from buck to boost operation and vice versa, since current controller switchover is not necessary. Furthermore, the proposed parallel control using DC droop with secondary control, enhances the current sharing accuracy while well regulating the DC bus voltage. A 20-kW prototype of the proposed converter has been developed and verified with experiments and indicates a 99.3% maximum efficiency and 98.8% rated efficiency.