• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.32-37
• /
• 2013

Relationships among climate changes, early frost, and fruit growth were studied during the final month to harvest of late-maturing 'Fuyu' persimmon (Diospyros kaki) to assess the changes in fruit characteristics during this critical period. The heavy frost on Nov. 16 defoliated more than 70% of the leaves, but with little damage on the fruits. However, all the leaves were defoliated by the heavy frost on Nov. 20, and all the fruits were cold-damaged by $-3.3^{\circ}C$ on Nov. 21. Fruit weight increased by 8-25 g per week from Oct. 25 (142 days after full bloom) to Nov. 15, reaching to 250 g, but it decreased by 3-4 g per week after the frost. Hunter a value of fruit skin gradually increased until the last harvest on Nov. 29 with a temporary halt in early Nov. when temperature was high, whereas fruit firmness rapidly decreased after the frost on Nov. 21. Fruit soluble solids were $15.7-16.1^{\circ}Brix$ for the final month. When some branches were covered with non-woven fabrics to avoid direct contact with frost, the fruits on the branches were not visually damaged by the low temperature although 40-60% of their leaves were defoliated on Nov. 16. However, low temperature on Nov. 20 and 21 defoliated all the leaves, causing cold damage on the fruits. There was a highly significant correlation between the fruit diameter and its weight ($R^2$ = 0.73-0.91). So, the regression equations could be used to estimate weight from diameter of the fruits sampled from the branches with the non-woven fabrics. The calculated fruit weight reached to a maximum of 240 g on Nov. 15. Daily increases in fruit weight were 1.1-2.5 g from Oct. 25 to 31, 1.9-3.5 g from Oct. 31 to Nov. 7, and 1.4-1.6 g from Nov. 7 to 12. However, fruit weight decreased by 0.3-1 g per day after the cold damage on Nov. 21. The results indicate that the most appropriate harvest time could be dependent on relationship of fruit growth to climate.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.565-572
• /
• 2013

The objective of this study was to describe and analyze the effect of high pressure sodium lamp lighting (HPS) on dynamics of growth and dry matter partitioning, and light use efficiency of sweet pepper crop grown over winter season. Young sweet pepper seedlings were planted at 3.75 plants per $m^2$ on September 29, 2010 and treated with HPS for 16 hours from December 14, 2010 until March 18, 2011. The number of leaves per plant were significantly increased with HPS, whereas the number of internodes and leaf area were less affected. HPS reduced the plant height with higher number of fruits per stem compared to those of without HPS lighting (CON). There were large differences in total dry mass production, stem and fruit dry mass between HPS and CON and those with HPS increased by 67.8%, 28.5%, and 97.1% compared to CON, respectively. Each organs of dry mass partitioning was calculated by leaf, stem or fruit growth rate divided by total plant growth rate. Dynamics of dry mass partitioning to leaf and stem between HPC and CON was measured in range of 45-47% at beginning of growth phase and drastically decreased after starting fruit growth in both treatments. Dry matter partitioning to vegetative organs was 4% higher compared to the plant grown under HPS lighting. Averaged dry matter partitioning to fruit with HPS, however, was largely increased by 14.2% compared to CON. Dynamics of the plant growth were well described by expolinear growth equation with three parameters of maximum relative growth rate, absolute growth rate and lost time to reach linear phase. The maximum growth rate of leaf, stem and fruit with HPS was increased by 18.6%, 74.7%, and 143.5% compared to CON. There was a linear relationship between intercepted light integral and vegetative organs (leaf and stem), fruit or total dry mass production. Light use efficiency (LUE, $g{\cdot}MJ^{-1}$) of total dry mass was $4.90g{\cdot}MJ^{-1}$ for HPS and $3.84g{\cdot}MJ^{-1}$ for CON, LUE of vegetative organs was $1.56g{\cdot}MJ^{-1}$ for HPS and $1.61g{\cdot}MJ^{-1}$ for CON and LUE of fruit dry mass was $3.34g{\cdot}MJ^{-1}$ for HPS and $2.23g{\cdot}MJ^{-1}$ for CON. The difference in LUE of total dry mass between treatments, therefore, occurred mainly from the different in LUE of fruit dry mass.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.93-105
• /
• 2015

This study was performed to analyze genetic relationships of the four major cucurbitaceous crops including watermelon, melon, cucumber, and squash/pumpkin. Among 120 EST-SSR primer sets selected from the International Cucurbit Genomics Initiative (ICuGI) database, PCR was successful for 51 (49.17%) primer sets and 49 (40.8%) primer sets showed polymorphisms among eight Cucurbitaceae accessions. A total of 382 allele-specific PCR bands were produced by 49 EST-SSR primers from 24 Cucurbitaceae accessions and used for analysis of pairwise similarity and dendrogram construction. Assessment of the genetic relationships resulted in similarity indexes ranging from 0.01 to 0.85. In the dendrogram, 24 Cucurbitaceae accessions were classified into two major groups (Clade I and II) and 8 subgroups. Clade I comprised two subgroups, Clade I-1 for watermelon accessions [I-1a and I-1b-2: three wild-type watermelons (Citrullus lanatus var. citroides Mats. & Nakai), I-1b-1: six watermelon cultivars (Citrullus lanatus var. vulgaris S chrad.)] a nd C lade I -2 for melon and cucumber accessions [I-2a-1 : 4 melon cultivars(Cucumis melo var. cantalupensis Naudin.), I-2a-2: oriental melon cultivars (Cucumis melo var. conomon Makino.), and I-2b: five cucumber cultivars (Cucumis sativus L.)]. Squash and pumpkin accessions composed Clade II {II-1: two squash/ pumpkin cultivars [Cucurbita moschata (Duch. ex Lam.)/Duch. & Poir. and Cucurbita maxima Duch.] and II-2: two squash/pumpkin cultivars, Cucurbita pepo L./Cucurbita ficifolia Bouche.}. These results were in accordance with previously reported classification of Cucurbitaceae species, indicating that watermelon EST-SSRs show a high level of marker transferability and should be useful for genetic study in other cucurbit crops.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.77-83
• /
• 2016

The measurement of total fresh weight of plants provides an essential indicator of crop growth for monitoring production. To measure fresh weight without damaging the vegetation, image-based methods have been developed, but they have limitations. In addition, the total plant fresh weight is difficult to measure directly in hydroponic cultivation systems because of the amount of nutrient solution. This study aimed to develop a real-time, precise method to measure the total fresh weight of Romaine lettuce (Lactuca sativa L. cv. Asia Heuk Romaine) with growth stage in a plant factory using a nutrient film technique. The total weight of the channel, amount of residual nutrient solution in the channel, and fresh shoot and root weights of the plants were measured every 7 days after transplanting. The initial weight of the channel during nutrient solution supply (Wi) and its weight change per second just after the nutrient solution supply stopped were also measured. When no more draining occurred, the final weight of the channel (Ws) and the amount of residual nutrient solution in the channel were measured. The time constant (${\tau}$) was calculated by considering the transient values of Wi and Ws. The relationship of Wi, Ws, ${\tau}$, and fresh weight was quantitatively analyzed. After the nutrient solution supply stopped, the change in the channel weight exponentially decreased. The nutrient solution in the channel slowly drained as the root weight in the channel increased. Large differences were observed between the actual fresh weight of the plant and the predicted value because the channel included residual nutrient solution. These differences were difficult to predict with growth stage but a model with the time constant showed the highest accuracy. The real-time fresh weight could be calculated from Wi, Ws, and ${\tau}$ with growth stage.

• Journal of Distribution Science
• /
• v.10 no.6
• /
• pp.39-53
• /
• 2012

It is widely known that knowledge management plays a facilitating role that contributes to upgrading organizational performance. Knowledge management systems (KMS), especially, support the knowledge management process including the sharing, creating, and using of knowledge within a company, and maximize the value of knowledge resources within an organization. Despite this widely held belief, there are few studies that describe how companies actually develop, share, and practice their knowledge. Companies in the domestic small franchise sector, which are in the early stages in terms of knowledge management, need to improve their KMS to manage their franchisees effectively. From this perspective, this study uses a qualitative approach to explore the actual process of knowledge management implementation. This article presents a case study of PB (Paris Baguette) company, which is the first to build a KMS in the franchise industry. The study was able to confirm the following facts through the analysis of target companies. First, the chief executive's support is a critical success factor and this support can increase the participation of organization members. Second, it is important to build a process and culture that actively creates and leverages information in knowledge management activities. The organizational learning culture should be one where the creation, learning, and sharing of new knowledge is developed continuously. Third, a horizontal network organization is needed in order to make relationships within the organization more close-knit. Fourth, in order to connect the diverse processes such as knowledge acquisition, storage, and utilization of knowledge management activities, information technology (IT) capabilities are essential. Indeed, IT can be a powerful tool for improving the quality of work and maximizing the spread and use of knowledge. However, during the construction of an intranet based KMS, research is required to ensure that the most efficient system is implemented. Finally, proper evaluation and compensation are important success factors. In order to develop knowledge workers, an appropriate program of promotion and compensation should be established. Also, building members' confidence in the benefits of knowledge management should be an ongoing activity. The company developed its original KMS to achieve a flexible and proactive organization, and a new KMS to improve organizational and personal capabilities. The PB case shows that there are differences between participants perceptions and actual performance in managing knowledge; that knowledge management is not a matter of formality but a paradigm that assures the sharing of knowledge; and that IT boosts communication skills, thus creating a mutual relationship to enhance the flow of knowledge and information between people. Knowledge management for building organizational capabilities can be successful when considering its focus and ways to increase its acceptance. This study suggests guidelines for major factors that corporate executives of domestic franchises should consider to improve knowledge management and the higher operating activities that can be used.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.10
• /
• pp.47-66
• /
• 2019

A parametric numerical analysis according to diameter, length, and N values of soil was conducted for the PHC pile socketed into weathered rock through sandy soil layers. In the numerical analysis, the Mohr-Coulomb model was applied to PHC pile and soils, and the contacted phases among the pile-soil-cement paste were modeled as interfaces with a virtual thickness. The parametric numerical analyses for 10 kinds of pile diameters were executed to obtain the load-settlement relationship and the axial load distribution according to N-values. The load-settlement curves were obtained for each load such as total load, total skin friction, skin friction of the sandy soil layer, skin friction of the weathered rock layer and end bearing resistance of the weathered rock. As a result of analysis of various load levels from the load-settlement curves, the settlements corresponding to the inflection point of each curve were appeared as about 5~7% of each pile diameter and were estimated conservatively as 5% of each pile diameter. The load at the inflection point was defined as the mobilized bearing capacity ($Q_m$) and it was used in analyses of pile bearing capacity. And SRF was appeared above average 70%, irrespective of diameter, embedment length of pile and N value of sandy soil layer. Also, skin frictional resistance of sandy soil layers was evaluated above average 80% of total skin frictional resistance. These results can be used in calculating the bearing capacity of prebored PHC pile, and also be utilized in developing the bearing capacity prediction method and chart for the prebored PHC pile socketed into weathered rock through sandy soil layers.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.497-505
• /
• 2019

Winter hibernation in wildlife is a unique physiological mechanism for survival. For Asiatic black bears (ABBs, Ursus thibetanus ussuricus), hibernation is a very important but dangerous time for the cubs to be born. This study surveyed ABBs living in Mt. Jiri To examine the relationship between the temperature during hibernation and the hibernation days. The survey found that the average start and end dates of hibernation was December 7 and April 20, respectively. The average day of hibernation for females who gave birth was $167.8{\pm}22.6$ days. The average temperature of 5 days before hibernation was $0.6{\pm}4.1^{\circ}C$, the average temperature during hibernation was $1.3{\pm}2.43^{\circ}C$, and the average temperature of five days before the end of hibernation was $12.6{\pm}3.1^{\circ}C$. The hibernation days of the females that did not give birth to cubs and the males were $120.4{\pm}25.7$ days and $113.6{\pm}25.8$ days, respectively. The average temperatures of 5 days before hibernation was $2.1{\pm}4.2^{\circ}C$ and $-1.8{\pm}3.9^{\circ}C$, respectively. The average temperature during hibernation was $-0.2{\pm}1.6^{\circ}C$ and $-0.4{\pm}2.4^{\circ}C$. The average temperatures of five days before the end of hibernation were $7.8{\pm}3.6^{\circ}C$ and $7.8{\pm}4.4^{\circ}C$. These results indicate that females giving birth to cubs have higher hibernation days and average temperatures than the females that do not give birth and the males, which is due to the process of raising cubs during hibernation. The hibernating days and mean temperature for the groups in each lifecycle did not show any difference between the groups. This study is meaningful in that it disclosed the characteristics of hibernating intrinsic behaviors of ABBs. It observed the specific hibernation period and temperature of ABBs bears inhabiting in Mt. Jiri and examined the difference by sex, female(giving birth) and life cycle group according to temperature. The results of this study can be used to prevent the conflict between ABBs and humans in winter and spring and establish the preservation management plan.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.464-471
• /
• 2017

The purpose of this study was to evaluate the effect of superheated steam drying on physicochemical and microbial characteristics of Korean traditional actinidia (Actinidia arguta) leaves. Actinidia leaves were dried at steam temperature of $350^{\circ}C$ and oven temperature of $150^{\circ}C$ for 40-200 sec. Moisture content and water activity decreased with increasing the drying time, while color values including L, a, and b values and total color difference (${\Delta}E$) increased as drying time increased. The relationship between moisture content and water activity showed an exponential fit with high correlation vlaue ($R^2=0.9909$). Total phenolics and flavonoids content and antioxidant activity such as DPPH radical scavenging activity, ABTS radical scavenging activity, and FRAP assay of dried actinidia leaves increased with increasing the drying time up to 160 sec, but dramatically decreased at drying of 200 sec. The numbers of total areobic bacteria of leaves was not detected at drying time over 120 sec and coliform of all the samples was not detected. As a results, the superheated steam was an very effective drying method of increase to the nutritional and sanitary quality of dried Korean traditional actinidia leaves.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.3
• /
• pp.139-144
• /
• 2000

This study was conducted to obtain the basic information to increase the practical use of soil survey data through the subdividing of valley shapes with soil sequences due to different parent rocks, and to study the relationship between the valley shapes and parent rock. The various rocks such as sedimentary(gray shale and sand stone) and igneous rocks(granite, granite gneiss and andesite porphyry) which are the major parent rocks in Yeongnam area were investigated. The characteristics of valleys formed and the kinds of soils derived from different rocks were analysed by using aerial photographs and topographical maps scaled 1:5,000. The rill density in igneous rock area was as high as 40. But the rill bifurcation ratio of first order stream was higher in the sedimentary than the igneous rocks except granite area. The mean slope of valleys in igneous areas was about 8%, which was higher than that of the sedimentary areas. The variability of valley width in the complexly metamorphosed rock, such as granite gneiss, and andesite porphyry, was greater than in sedimentary and in granite rocks. Based on the variability of valley widths and valley slopes, it was possible to classify the valleys into two types. The "Uterus-shaped valleys" had wide variability of valley width and were located in the areas of granite gneiss and andesite porphry rocks. while the "Roots-shaped valleys" had narrow variability of valley width and were located in the sedimentary areas. "Uterus-shaped valleys" were typified by having land forms of mountain foot slopes and alluvial fans, and the soil drainage sequences also had complexities. So that, we concluded that the variability of valley width and valley slopes was associated with kinds of parent rocks and metamorphism which influences soil sequence and characteristics.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.25-58
• /
• 2021

This study investigated the corporate growth with more emphasis on longitudinal characteristics, not the results of companies with relatively more emphasis on cross-sectional, in the 21st-century entrepreneurial context. As of the end of 2019, sampled 479 global unicorn companies, and 333 high-growth companies with revenue of more than $100 million among 5,000 private companies in the U.S. with a compound annual growth rate (CAGR) exceeding 15% for the past three years. They were examined with 3 perspectives in terms of corporate growth that 1) the growth of enterprise value, 2) the pace of growth, and 3) the effectiveness of growth. As a result of our study, the corporate growth of the perspective of creating enterprise value had a relatively higher relationship with the characteristics of industries and markets. The pace of growth was more fully explained by the characteristics of the industry and the market environment and the choice of strategies that make up a valid combination. In addition, growth in terms of the effectiveness of corporate performance was influenced by the choice of strategy, the characteristics of the industry and market environment, and its business age, the proxy variable of resource accumulation, comprehensively. This study through a sample based on companies with an enterprise value of more than $1 billion and annual revenue of more than $100 million can be a valid reference in terms of creating milestones and roadmaps for scale-up of early-stage startups, particularly in terms of practitioners' point of view. It also provides a critical reference for overcoming the limitations of mainstream theories of the 20th century and developing the theory of corporate growth that fits the 21st-century entrepreneurial context.