• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.640-647
• /
• 2013

Building Information Modelling (BIM) has become the new international benchmark for efficiency in design, construction and maintenance of buildings. It is the platform that brings about collaboration between project stakeholders and improvement of project outcomes. With all its potentials, not much of the impact of BIM technologies has been felt in the Nigerian construction industry. This research aimed at assessing the readiness of the Nigerian building design firms to adopt BIM technologies. The research was exploratory in nature. A field survey was conducted with the use of structured questionnaire, self administered to a sample of building design consultancy firms (architectural, structural, M&E, quantity surveying, and multi-disciplinary design firms) within Abuja and Kaduna. The questionnaire sought the perception of the responding firms on the factors affecting BIM adoption in the Nigerian construction industry, and their level of readiness to adopt BIM technologies in their practices based on the four categories of readiness-management, people, process and technology. 42.26% response rate was achieved and used for analysis. ANOVA and DUNCAN post-hoc tests were used to establish the differences between the responses of the groups of firms, while means and standard deviations were obtained to establish the important factors affecting BIM adoption in Nigeria. The survey revealed that all the groups of Nigerian design firms are appreciably ready for the adoption of BIM technologies in their practice, with slight variations in their respective levels of readiness. 'Lack of awareness of BIM technology among professionals' and clients and 'lack of knowledgeable and experienced partners' were identified as the most important barriers of BIM adoption in Nigeria; while the most significant drivers are 'availability of well trained professionals' and 'cooperation and commitment of professional bodies to the adoption'. Education and training of building design professionals and cooperation of all stakeholders in the design and construction supply chain were recommended as part of measures to ensure successful adoption of BIM in the Nigerian construction industry.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.240-266
• /
• 2013

The purpose of this study is to investigate the self-directed learning readiness of university students' majored in science and engineering as life-long learners, and to analyze the relationship between self-directed learning readiness and learning style. Participants of this study are 142 students majored science and engineering in H university of Chung-nam province to participate in taking self-directed learning readiness tests and Kolb's learning style tests. The results of this study are as follows: First, the average of overall participants' self-directed learning readiness is 3.41, which is possibly regarded as 'an average' according to Guglielmino & Guglielmino (1991)'s interpretation of scores. Second, among four basic scales of participants' learning styles, the highest is found in Active Experiment (AE), the lowest is found in Abstract Conceptualization (AC). In addition, the highest thing of the four learning styles found among the participants is divergers (36.6%) and the lowest is convergers (13.4%). Finally, this study compares the high-level and low-level groups of self-directed learning readiness score with learning style. there is a statistically significant correlation between the score of self-directed learning readiness and CE, AC (p=.01). Therefore, self-directed learning readiness is related to learning style.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.50-56
• /
• 2010

Military technology transition is the process of transition from the science and technology environment to systems to supply effective weapon systems and support systems to the fighters. In case of technology transition decision, immatured technologies result in increasing acquisition cost and delaying schedule toward the objective system. In this paper, we proposed a method to identify and select critical technology elements by integration relations between technologies or components, for supporting technology transition and risk management of military R&D projects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4163-4170
• /
• 2013

The recent studies indicated that the major sources of the failure in carrying out the programs of weapon systems development would be the unsatisfaction of the required key performance and also the use of premature technology. As such, to manage the risk during the weapon systems development, the use of the technical performance measurement (TPM) and the technology maturity assessment (TMA) turned out to be necessary. However, the TPM studied so far seems to cover the assessment of performance at the component level only, and thus is insufficient in considering the system integration effect. On the other hand, the system readiness level (SRL) method has been presented by reflecting the effect on system integration, but the system performance and maturity has not been considered. To overcome this, a measurement method is proposed in the paper by utilizing the combined system readiness level and achieved technical performance at the system level. This system performance measure can be useful in managing the risk in the weapon systems development.

• Asian Journal of Innovation and Policy
• /
• v.7 no.3
• /
• pp.438-456
• /
• 2018

This study aims to understand the importance of commercialization of research and development projects and examines key factors that allow successful technology transfer and commercialization. Given the characteristics of the railway research project, and assuming that R&D input factors would vary depending on the technology readiness level and the degree of research convergence, this study analyzes the moderating effect of each R&D input factor on technology transfer and commercialization to determine their eventual impact. Through this study, it was found that it was necessary to proceed to technology transfer and commercialization of the national research and development projects via strategic workforce composition and allocation of research funding given the subjects and development goals of R&D projects.

• Fashion & Textile Research Journal
• /
• v.23 no.3
• /
• pp.347-357
• /
• 2021

This study analyzed the effects of optimism and innovativeness, the two drivers of a consumer's technological readiness to use an augmented reality(AR) fashion shopping service within the framework of the Technology Acceptance Model (TAM). The survey was conducted on 249 people (males = 58; females = 191) in their 20s who were willing to participate in the AR experience. Data were analyzed using confirmatory factor analysis (CFA) and structural equation modeling by AMOS 22.0. The results indicated that a greater level of perceived optimism had a positive influence on the ease of use and usefulness of the technology. The findings also show that consumers with a high degree of innovativeness tend to have a higher level of playfulness toward AR fashion shopping. Regarding the effects of user beliefs, ease of use had a positive effect on the perception of usefulness and playfulness with higher levels implying a higher consumer intention to adopt an AR fashion shopping service. In addition, this study reveals the moderating effect of consumers with high-fashion versus those with low-fashion innovativeness. For the latter, technological innovation had an insignificant effect on playfulness, thus indicating that consumers with low interest in fashion did not enjoy AR fashion shopping even if the technology was highly innovative. Nevertheless, the analysis confirms the possibility that experiencing a fashion product through AR technology could replace the actual experience of wearing the products.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1412-1422
• /
• 2016

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.133-138
• /
• 2009

A mortar system is able to be fired more rapidly and concentratedly than other field gun systems. A mortar system can be easily manufactured because of its simple structure. It has also been supporting for the fire power of infantry because it can be carried conveniently. But a mortar system has demerits that are the limited firing range, poor accuracy and uncomfortable operability. Korean army plan to be operated rapidly and enlarge battle field in the near future. So weapon systems of Korean army must have longer firing range, automatic laying function and precision firing capability. This study suggests efficient developing concept of 120mm self-propelled mortar system through surveying the technical readiness level of current R&D and manufacturing ability.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.655-662
• /
• 2011

SAR(Synthetic Aperture Radar) has the ability to generate high resolution images regardless of a weather condition(e.g. visibility good or poor and day or night, etc.). SAR is considered as one of the most important powers and needs for the future since it has been utilized in a number of important military fields such as early warning, urban defense, missile guidance system, etc. Additionally there are many civilian demands and applications in aviation, traffic control, earth and space explorations, weather forecast etc. This days, the ability to acquire and analyze information is needed to cope with the urgency of global politics and international changes. In this paper, technical survey and development review for SAR systems are investigated to derive the core and immature technologies of domestic defense industry.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.264-272
• /
• 2012

TRL has a direct impact on development schedule and cost in the system or technology development projects. If TRL capability of development organization for specified CTEs can be accurately assessed and the impact of TRL on development schedule and cost are analyzed as detailed as possible, the risk of development schedule delay and cost increase can be minimized during the development process. This paper describes analysis results of TRL impact on development schedule and cost in the aerospace project. The development schedule and cost change are quantitatively estimated for the TRL improvement in the Unmanned Aerial Vehicle(UAV) system development program.