• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.61-66
• /
• 2010

Purpose: Recently, Department of Nuclear Medicine have an interest in Video Display Terminals (VDT) syndrome including musculoskeletal disorders, ophthalmologic disorders, trouble of electromagnetic waves and stress disorders occur to VDT workers as the growing number of users and rapid pace of service period supply in large amount. This study research on the actual condition for VDT syndrome in Nuclear Medicine, Seoul National University Hospital (SNUH), discover the problem and draw a plan of upcoming improvement. The aim of this study establish awareness about VDT syndrome and is to prevent for it in the long run. Materials and Methods: Department of Nuclear Medicine, SNUH is composed Principle part, Pediatric part and PET center. We estimated risk factors visit in each part directly. Estimation method use "Check list for VDT work" of Wonjin working environment health laboratory and check list is condition of VDT work, condition of work tables, condition of chairs, condition of keyboards, condition of monitors, working position, character of health management and other working environment. Analysis result is verified in Department of Occupational and Environment, Hallym University Sacred Heard Hospital. Results: As a result of analysis, VDT condition of Department of Nuclear Medicine, SNUH is rule good. In case of work tables, recent of things are suitable to users upon the ergonomical planning, but 15% of existing work tables are below the standard value. In case of chairs are suitable, but 5% of theirs lost optimum capacity become superannuated. The keyboards are suitable for 98% of standard value. In case of monitors, angle control of screen is possible of all, but positioning control is impossible for 38%. In case of working position, 10% is fixed positioning for long time and some of the items researched unsuitable things for standard. At health management point, needed capable of improvement. Also, other working condition as lighting, temperature, noise and ventilation, discovered the problem, but is sufficient to advice value. Conclusion: VDT syndrome is occurrences of possibility continuously, come economical expensive about improvement, is inherent in various causes and originate without your knowledge. So, there is need systematic management system. In Nuclear Medicine, VDT syndrome make it better that constant interest and effort as improvement of ergonomical working environment, improvement of working procedure, regular exercise and steady stretching, and can be prevented fairly. This promote physical and mental condition of worker in top form in comfortable working environment, so this is judged by enlargement of operations efficiency and rising of satisfaction ratings of the inside client.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.535-542
• /
• 2012

This study was carried out from 2011 to 2012 in order to analyze the cultivation technology system by six organic rice cultivation types in the southern provinces for the purpose of utilizing organic rice farming guidelines. This surveys were conducted by site visit on 8 counties and 115 farms in southern area. Cultivation technology system by six organic rice cultivation types were cultivated by the principle of minimum input or non-input. cropping systems, a mixture of barley and rice, or rice green manure crops were grown. Cultivars were mixture of the local cultivars and Japanese varieties. Soil were managed by a self-manufactured compost, indigenous microorganisms and barley straw without any fertilization. Pest control was mainly practied by purchased eco-friendly organic materials or herbal medication residue and indigenous microbial self-manufactured. Weed was controled by snails and barley straw. In addition, considering the restore of a longtail pitching shrimp and grasshoppers, the fuction of environmental ecology of six organic rice cultivation type proved to be excellent all. Meanwhile, the productivity of the organic farming per 10a were the order of Life and environment > Natural circulation > Stevia > Ji jang > Art and nature > Taepyoung of Farming Methods, but the farmers received prices showed the opposite tendency. Simple profitablity did not show a big difference. But, the productivity of all type of the organic farming were lower then the conventional farming. Finally, If we want to conduct safety and easy farming, we can suggest stevia farming, Natural circulation farming and life and environmental farming out of 6 organic rice cultivation types.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.659-666
• /
• 2004

This study was conducted to assess objective and subjective meat quality traits for imported chilled beef with a high degree of marbling in longissimus muscle with reference to Hanwoo beef Muscle samples of four Wagyu, four Angus, four Hanwoo grade 1, and three Hanwoo grade 3 were purchased from a commercial beef market. The meats had intramuscular fat content of approximately 22, 8, 13 and 4%, and aged for 31, 71, 14 and 14 days, respectively. Imported beef showed a significantly(P<0.05) lower WB-shear force than Hanwoo. However, the instrument measurement did not reflect sensory tenderness and juiciness, which were similar between the four groups. On the other hand, Hanwoo beef showed significantly(P<0.05) favorable flavor intensity. This was likely an indication of more a desirable eating quality for Hanwoo beef, regardless of the level of intramuscular fat content. Discriminant functions of C18: 0, C18: In-7, C18: In-9, C20: 3n-6, C20 : 4n-6 and total n-3 polyunsaturated fatty acids classified the domestic and foreign beef products at 100%, despite a noticeable difference between two groups existed only in C18:0. Principle component analysis indicated that subjective flavor intensity was negatively related to C18: 0 and C18: ln-7. The result indicated that C18: 0 could be a possible candidate fatty acid for difference in flavor intensity between two beef groups. The current study demonstrated that the domestic product was more acceptable for Korean consumers. However, it was not identified whether the result was associated with breed, feeding regime, or ageing time. Further studies are required for breed specification in terms of sensory characteristics and consumer preference.

• Clean Technology
• /
• v.26 no.2
• /
• pp.151-157
• /
• 2020

Rapid urbanization has elevated the risk of urban flooding due to the increase in the impervious surface, causing environmental disasters and environmental pollution problems, such as lowering the groundwater level and increasing water pollution. In Korea, low impact development (LID) techniques have been introduced to minimize these environmental impacts and maintain the water cycle soundness. However, most small-scale development projects are in blind spots because there is no legal basis for rainfall runoff management. Small-scale development projects that increase the surface runoff of rainwater are required to mandate the application of LID facilities in accordance with the polluters' responsibility principle. Therefore, it is necessary to implement a preliminary consultation system for water cycle recovery. This study focuses on the cost-benefit analysis on the application of LID techniques for small-scale development projects. The scale of nationwide small-scale development projects used for cost-benefit analysis were defined as buildings with a land area of more than 1,000 ㎡ or a total floor area of 1,500 ㎡. As a result of analyzing the cost-benefits from the installation of LID facilities, they were found to be much lower than the economic standard value of 1. This might be due to the high cost of facilities compared to the scale of the project. However, considering the overall environmental value of improving the water environment and air quality by the installation of LID facilities and the publicity of reducing the operating cost of sewage treatment facilities, the introduction of a prior consultation for small-scale development projects is inevitable. In the future, institutional and financial support from local governments is required to improve the cost-benefits with the introduction of a prior consultation for small-scale development projects.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.170-183
• /
• 2019

Fiber scutching refers to the process of extracting fibers from plants by separating or extracting fibers from the raw materials. As the definition of the term implies, the "Fiber Scutching" is performed on plants with advanced bast fiber as the primary material processing technique performed on plant materials. Some of the most popular phosphorus plants are ramie, hemp, flax, and the paper mulberry, which have a long history of cultivation and a wide range of distribution, making them very universal as a material supporting human life and culture. This study was described in Oju-yeonmunjangjeon-sango but was designed to re-examine the method of breaking dried stalks, which is currently unused in Korea, to examine the feasibility and characteristics of the technology. As a result of sampling and experimenting with hemp bast using the method recorded in the literature, hemp fiber was actually produced. The criteria for removing the shell from the hemp stem were the degree of discoloration and drying, and only when the stalk was completely discolored to yellow could segregation of the stalk from the shell be performed. The amount of sunlight and temperature were conditions that accelerated drying. However, if exposed for a long time, it is confirmed that hemp bast will be in a suitable condition to process, regardless of the amount of sunlight and temperature. 'Breaking of dried stalks', which utilizes the physical power of 'threshing with a flail' is considered a core process of the fiber scutching technique in 'Yukjin' in Hamgyeong-do. The bark and the core of the hemp were separated by tapping, the bast was thinly split, and the shell was peeled off, making it suitable for collecting with thread. The method of collecting the fibers by applying physical power causes downing on the fibers, which is to be generally avoided in the manufacture of bast fabric woven hemp or ramie. However, Hamgyeong-do's fiber scutching method seems to have applied this principle to the method of making fragile fabrics by using it in reverse. This method is distinct from the steaming or boiling of the stalks' in Andong, Korea, and it is similar to the Western method of spinning fabrics.

• Korean Journal of Agricultural Science
• /
• v.6 no.1
• /
• pp.56-64
• /
• 1979

Two types of fiat-plate collector were designed and constructed for utilizing the solar energy as heating source of red pepper drying. It was performed to investigate the basic factors on using the collectors and the drying effect on various types of red pepper, and the results obtained are summarized as follows. 1. The optimum tilted angles of the collector in Daejeon area were ${\phi}-15^{\circ}$ in summer season and ${\phi}+15^{\circ}$ in winter season when it was adjusted two times per a year: 2. In the conditions during experiment period, average atmospheric temperature and relative humidity were $25.6^{\circ}C$ and 52.6%, respectively, and $42.0^{\circ}C$, 74.2% in the control chamber. The temperature in the drying chamber connected to the water heater was the highest but relative humidity in the chamber connected to the air heater was the lowest among the chambers. 3. The drying velocity of whole red pepper in the chamber connected to the water heater was the fastest as 2.3 times as compared to the whole type on the mat drying followed by air heater and control in decreasing order. The horizontally cut red pepper in the chamber connected to the water heater was dried exceedingly fast among twelve plots. 4. The content of capsaicine as pungent principle and of capsanthine as red pigment in the red pepper were reduced during drying but there were no differences significantly on the drying method, and it could not affect much on the quality of dried product.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.637-651
• /
• 2019

In the event of a major accident such as an explosion in a refinery or a petrochemical plant, it has caused a serious loss of life and property and has had a great impact on the insurance market. In the case of catastrophic incidents occurring in process industries such as refinery and petrochemical plants, only the proximate causes of loss have been drawn and studied from inspectors or claims adjustors responsible for claims of property insurers, incident cause investigators, and national forensic service workers. However, it has not been done well for conducting root cause analysis (RCA) and identifying the factors that contributed to the failure and establishing preventive measures before leading to chemical plant's catastrophic incidents. In this study, the criteria of warning signs on CCPS catastrophic incident waning sign self-assessment tool which was derived through the RCA method and the contribution factor analysis method using the swiss cheese model principle has been reviewed first. Secondly, in order to determine the major incident warning signs in an actual chemical plant, 614 recommendations which have been issued during last the 17 years by loss control engineers of global reinsurers were analyzed. Finally, in order to facilitate the assessment index for catastrophic incident warning signs, the criteria for the catastrophic incident warning sign index at chemical plants were grouped by type and classified into upper category and lower category. Then, a catastrophic incident warning sign index for a chemical plant was developed using the weighted values of each category derived by applying the analytic hierarchy process (pairwise comparison method) through a questionnaire answered by relevant experts of the chemical plant. It is expected that the final 'assessment index for catastrophic incident warning signs' can be utilized by the refinery and petrochemical plant's internal as well as external auditors to assess vulnerability levels related to incident warning signs, and identify the elements of incident warning signs that need to be tracked and managed to prevent the occurrence of serious incidents in the future.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.164-183
• /
• 2021

This article examines how the production technology of the Chinese bronze mirror affected the Korean Peninsula and Japan. To that end, we looked at how the drawing of linked-arc designs in bronze mirrors was done. The drawing technique is classified into three methods: Type 1 and type 2 were confirmed to have been used in China, but type 3 was used not in China, but on the Korean Peninsula and in Japan. Type 1 and type 2 are basically the same, with an identical restored diameter of the linked-arc design, and type 2 is found elsewhere in the bronze mirror, and type 1 are not. Type 3 features different diameters, and the linked-arc design does not form a complete circle. This shows that the manufacturer of the bronze mirror did not use several bumpy compasses, but rather a single one with a fixed center and protrusion, rather than one that can be easily adjusted, as it is today. That is why, of course, a pair of compasses must have been used several times. In this regard, those who produced bronze mirrors on the Korean Peninsula in the early days understood not only the Chinese techniques of the linked-arc design, but also the meaning contained within them. On the other hand, the makers of bronze mirrors in Japan did not understand the patterns and simply imitated them. From the late Yayoi period, Japan understood and produced works with the principle of drawing the linked-arc design. As a representative example, bronze mirrors excavated from the tomb of Hirabaru can be referenced. Perhaps it can be assumed that, behind these works, there was a direct transfer of technology, such as the migration of the makers of bronze mirror makers like the Do family (陶氏), whose names were found written on bronze mirrors excavated from the Hirabaru tomb.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.93-99
• /
• 2022

With the rapid development of ultra-small and wearable device technology, continuous electricity supply without spatiotemporal limitations for driving electronic devices is required. Accordingly, Triboelectric nanogenerator (TENG), which utilizes static electricity generated by the contact and separation of two different materials, is being used as a means of effectively harvesting various types of energy dispersed without complex processes and designs due to its simple principle. However, to apply the TENG to real life, it is necessary to increase the electrical output. In addition, stable generation of electrical output, as well as increase in electrical output, is a task to be solved for the commercialization of TENG. In this study, we proposed a method to not only improve the output of TENG but also to stably represent the improved output. This was solved by using the contact layer, which is one of the components of TENG, as an electret for improved output and stability. The utilized electret was manufactured by sequentially performing corona charging-thermal annealing-corona charging on the Fluorinated ethylene propylene (FEP) film. Electric charges artificially injected due to corona charging enter a deep trap through the thermal annealing, so an electret that minimizes charge escape was fabricated and used in TENG. The output performance of the manufactured electret was verified by measuring the voltage output of the TENG in vertical contact separation mode, and the electret treated to the corona charging showed an output voltage 12 times higher than that of the pristine FEP film. The time and humidity stability of the electret was confirmed by measuring the output voltage of the TENG after exposing the electret to a general external environment and extreme humidity environment. In addition, it was shown that it can be applied to real-life by operating the LED by applying an electret to the clap-TENG with the motif of clap.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.273-280
• /
• 2021

GangAm Song Sungyong (1913~1999) was from Gimje, Jeollabuk-do. And he is a calligrapher from the last Confucian scholar of the 20th century and a writer of poetry, calligraphy, and painting. While wearing a topcoat and hanbok for the rest of his life, he approached the study, thought, and calligraphy art of Yoo Jae Song Kimyeon and Kojae Lee Byungeun from the perspective of 'GucheSinyong'. And he kept the philosophical subjectivity that tries to maintain character and a right mind. It was based on 'Guche', which is a faithful succession to the reverence of the old. When I was young, I practiced Mibul and Dong Kichang with Gu Yangsun as the center, and Hwang Jeonggyeon, Hanye, Oh Heejae, and Sojeon typefaces were grafted together during the national exhibition. Then, in 1965 (age 53), he moved to Jeonju, and learned several typefaces such as Chusa typeface on his own, creating a Gangam typeface without any obstacles. And he created 'Sinyong' with Windy Bamboo painting, which embodied strange and unconventional meanings. In addition, he re-established his identity by reexamining the fundamental spirit and natural aesthetics of calligraphy, and based on this, he greatly contributed to expanding the aesthetics of modern calligraphy and painting art by pursuing an aesthetic that explores novelty. In particular, Windy Bamboo painting has strong abstraction based on the principle of 'drawing the will'. And, in terms of discipline, the ethical aesthetic of Express Tao with pictures (畵以載道), which expresses the high level of elegance of observing small things in a big way, based on deep research on the logic of things and fulfilling human nature. By implementing it, Tao and Art become one. The Jeonbuk calligraphy group achieved the greatest prosperity in the Gangam era, and at the end of the 20th century, it entered a period of revival as it established itself as the central calligraphy group of Korean calligraphy.