• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.50-60
• /
• 2010

For the last half a century, the personal computer and software industries have been prosperous due to the incessant evolution of computer systems. In the 21st century, the embedded system market has greatly increased as the market shifted to the mobile gadget field. While a lot of multimedia gadgets such as mobile phone, navigation system, PMP, etc. are pouring into the market, most industrial control systems still rely on 8-bit micro-controllers and simple application software techniques. Unfortunately, the technological barrier which requires additional investment and higher quality manpower to overcome, and the business risks which come from the uncertainty of the market growth and the competitiveness of the resulting products have prevented the companies in the industry from taking advantage of such fancy technologies. However, high performance, low-power and low-cost hardware and software platforms will enable their high-technology products to be developed and recognized by potential clients in the future. This paper presents such a platform for industrial embedded systems. The platform was designed based on Telechips TCC8300 multimedia processor which embedded a variety of parallel hardware for the implementation of multimedia functions. And open-source Embedded Linux, TinyX and GTK+ are used for implementation of GUI to minimize technology costs. In order to estimate the expected performance and power consumption, the performance improvement and the power consumption due to each of enabled hardware sub-systems including YUV2RGB frame converter are measured. An analytic model was devised to check the feasibility of a new application and trade off its performance and power consumption. The validity of the model has been confirmed by implementing a real target system. The cost can be further mitigated by using the hardware parts which are being used for mass production products mostly in the cell-phone market.

• Journal of Korean Home Economics Education Association
• /
• v.22 no.1
• /
• pp.1-19
• /
• 2010

The purpose of this study was to develop practical problem focused teaching learning process plan for housing for the later life in order to apply it to the older stage of family planning section of Technology Home Economics in a highschool. Practical problem focused method was used for the teaching learning process plans of 3-session lessons according to the ADDIE model. The global practical problem was "What should I do to plan a safe and comfortable housing for the later life?" In the development stage, 53 teaching learning materials (44 students activity materials, 2 students' and 5 teacher' reading texts, and 2 moving pictures) were developed for 3-session lessons. The planes applied to the 5 classes, 150 students, in the freshmen of B highschool during April 20th-24th, 2009. The 5 point likert questionnaire were used to evaluate the 3-session lessons about 4 contents related aspects as well as the methods and effects of the lessons besides 2 open ended questions. The overall evaluation was very positive in all 6 aspects of the lessons. Some students wanted to learn more about universal design and aging related jobs. Those results showed that the practical problem focused teaching learning process plan for housing for the later life which this study developed would be appropriate to teach the older stage of family planning section related to housing and could be adjusted to the condition of each school and regions.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.762-767
• /
• 2010

This study evaluated daily intakes of BHT, BHA, and TBHQ in Korean. The daily intakes were estimated using both a dietary survey approach and food supply survey approach. In the dietary survey approach, individual dietary intake data from the Korea National Health and Nutrition Survey in 2005, as well as analytical results of BHT in 131 samples, BHA in 134 samples, and TBHQ in 104 samples, were used to assess daily intakes of the antioxidants. In the food supply survey approach, both total production amounts of BHT, BHA and TBHQ and maximum permitted levels of the antioxidants were used to calculate daily intakes. In the dietary survey results, the average daily intakes of BHT, BHA and TBHQ were 0.8, 0.5, and 0.3 ${\mu}g$/kg body weight/day, respectively, and below 0.2% of the ADI (acceptable daily intake) set by JECFA (Joint FAO/WHO Expert committee on Food Additives). In the food supply survey approach, the average daily intakes of BHT, BHA,and TBHQ were all 0.3 mg/kg body weight/day. The ratios of ADI were 97, 60, and 40%, respectively. According to these results, daily intakes of BHT, BHA, and TBHQ in Korean are lower than the ADI.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.153-194
• /
• 2009

The resources of outer space are for the common exploitation of mankind, and it is a common responsibility of mankind to protect the outer space environment. With the rapid development of space science and technology, and especially with the busy space activities of some major space powers, environmental contamination or space debris is steadily increasing in quantity and has brought grave potential threats and actual damage to the outer space environment and human activities in space. Especially We must mitigate and seek out a solution to remove space debris which poses a threat directly to man's exploitation and use of outer space activities in the Low Earth Orbit (LEO) and in the Geostationary Orbit (GEO), through international cooperation and agreement in the fields of space science, economics, politics and law, in order to safeguard the life and property of mankind and protect the earth's environment. While the issue of space debris has been the subject of scientific study and discussion for some time now, it has yet to be fully addressed within the context of an international legal framework. During the earlier stages of the space age, which began in the late 1950s, the focus of international lawmakers and diplomats was the establishment of basic rules which sought to define the legal nature of outer space and set out the parameters for space activities and the nature and scope of activities carried out in outer space were quite limited. Consequently, environmental issues and the risks that might arise from the generation of space debris did not receive priority attention within the context of the development international space law. In recent years, however, the world has seen dramatic advances in technology and increases in the type and number of space-related activities which are being carried out. In addition, the number of actors in this field has exploded from two highly developed States to a vast array of different States, intergovernmental and nongovernmental organizations, including private industry. Therefore, the number of artificial objects in the near-Earth space is continually increasing. As has been previously mentioned, COPUOS was the entity that created the existing five treaties, and five sets of legal Principles, which form the core of space law, and COPUOS is clearly the most appropriate entity to oversee the creation of this regulatory body for the outer space environmental problem. This idea has been proposed by various States and also at the ILA Conference in Buenos Aires. The ILA Conference in Buenos Aires produced an extensive proposal for such a regulatory regime, dealing with space debris issues in legal terms This article seeks to discuss the status of international law as it relates to outer space environmental problem and space debris and indicate a course of action which might be taken by the international community to develop a legal framework which can adequately cope with the complexity of issues that have recently been recognized. In Section Ⅱ,Ⅲ and IV of this article discuss the current status of international space law, and the extent to which some of the issues raised by earth and space environment are accounted for within the existing United Nations multilateral treaties. Section V and VI discuss the scope and nature of space debris issues as they emerged from the recent multi-year study carried out by the ILA, Scientific and Technical Subcommittee, Legal Subcommittee of the United Nations Committee on the Peaceful Uses of Outer Space ("COPUOS") as a prelude to the matters that will require the attention of international lawmakers in the future. Finally, analyzes the difficulties inherent in the future regulation and control of space debris and the activities to protect the earth's environment. and indicates a possible course of action which could well provide, at the least, a partial solution to this complex challenge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.881-893
• /
• 2007

IT(Information Technology)-based industries have caused a recent digital revolution and the appearance of various types' information service, being largely expanded toward info-communication device company, info-communication service company, software company etc.. Therefore, the needs to evaluate the company value of IT business for M&A or liquidation are growing tremendously. Unlike other industries, however, IT industry has a short lift cycle and so it doesn't have not only a company value-evaluating model for general businesses but the objective one for IT companies yet. So, this thesis analyzes various value-evaluating technique and newly rising ROV. DCF, the change method of company's cash flow including tangible assets into future value, had been applied during the past industrialization economy era and has been persuasively applied to the present. However, the DCF valuation has no option but to make many mistakes because IT companies have more intangible assets than tangible assets. Accordingly, it is ROV, recognized as the new method of evaluating companies' various options normally and quantitatively, that is brought up recently. But the evaluation on the companies' various options is too subjective and theoretical up to now and due to the lack of objective ground and options, it's not possible to be applied to reality. In this thesis, it is found that ROV is more accurate than DCF, comparing DCF and ROV through four examples. As the options applied to ROV are excessively limited, we tried to develop ROV into a new method by deriving five invisible value factors within IT companies. Therefore, on this occasion, we should set up the basic valuation methods on IT companies and should research and develop an effective and various valuation methods suitable to each company like an internet-based company, a S/W developing enterprise, a network-related company among IT companies.

• Journal of Life Science
• /
• v.17 no.5 s.85
• /
• pp.728-734
• /
• 2007

In this study, we prepared surimi from pork leg and chicken breast by pH adjustments of 3.0 and 11.0. The content of crude protein, yield, water-holding capacity, redness, yellowness, myoglobin(Mb) and metmyoglobin(metMb) were significantly higher in the surimi manufactured from pork leg at adjustment pH 3.0 compared to the other surimi samples; whereas whiteness, myofibrillar protein, breaking force, deformation and gel strength were lower than other samples(P<0.05). The textural attributes were significantly higher in the surimi manufactured from pork leg at adjustment pH 11.0 compared to the other surimi samples; whereas Mb, metMb, cooking loss, breaking force, deformation and gel strength were lower than other samples(P<0.05). Again, the content of crude protein, yield, pH, breaking force, deformation, gel strength and lightness were significantly higher in the surimi manufactured from chicken breast at adjustment pH 3.0 compared to the other surimi samples; whereas myofibrillar protein, redness and metMb were higher than other samples(P<0.05). The content of myofibrillar protein, deformation, lightness and cohesiveness were significantly higher in the suriml manufactured from chicken breast at adjustment pH 11.0 compared to the other surimi samples; whereas Mb, cooking loss, yield and breaking force were higher than other samples(P<0.05). The chicken breast surimi had superior color and gel characteristics than manufactured from pork leg, and adjustment pH 11.0 had superior whiteness and cohesiveness than the pH 3.0 adjusted sample, however, there were no significant differences in sensory attributes among the surimi samples.

• Korean Journal of Food Science and Technology
• /
• v.49 no.4
• /
• pp.383-389
• /
• 2017

This study aimed to select a yeast strain for optimizing the quality of distilled spirits. The brewing and distilling properties of 4 KFRI (Korea Food Research Institute) yeasts (Y88-4, Y98-4, Y172-6, Y192-4) and 2 industry yeasts (C1, C2) were compared. For investigating the possibility of using these strains on an industrial scale, diverse analytical methods were applied to assess parameters associated with distilled spirit quality such as alcohol content, pH, total acidity, and soluble solid content. After 11 days of fermentation, the alcohol strength obtained using six yeast strains reached 13.9-16.4% (v/v), while pH was 3.9-4.0, and total acid was 0.40-0.52%. To compare GC-MSD Volatile flavor components, all the distilled spirit samples were diluted to 20% (v/v) alcohol strength. Seven fusel alcohols, 26 esters, 2 acids, and 3 miscellaneous compounds were detected in the distilled spirits. Y88-4 had the most abundant volatile flavor component and scored the highest overall preference in sensory evaluation. After analyzing the various properties of yeasts, strain Y88-4 was finally selected as the best strain for producing distilled spirits.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.274-279
• /
• 2018

To evaluate the antioxidant activities of Korean and Chinese Torreya seeds, their total phenolic compound content, total flavonoid content, DPPH radical and ONOO-scavenging activities were compared using their water and methanol extracts. The effective compounds were identified and quantitatively analyzed by GC-MS. The DPPH and ONOO-scavenging activities were the highest in the Korean Torreya seeds. After using GC-MS to identify the active compounds, a total of eight compounds were identified in Korean Torreya seeds, and five compounds were found in Chinese Torreya seeds. In conclusion, we could confirm the antioxidant activity and the difference between active compounds of the Korean and Chinese Torreya seeds; we also confirmed the superiority of Korean Torreya seeds. Futhermore, this basic data about the Korean and Chinese Torreya seeds can be provided to consumers, so that they can select proper and suitable functional foods.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.331-338
• /
• 2018

The purpose of this study was to determine the optimum sterilization conditions for the production of retorted steamed egg using response surface methodology. Sterilization processes for eighteen conditions using varying sterilization temperature ($X_1$), time ($X_2$), and method ($X_3$) as the independent variables were carried out through a $3^2{\times}2$ experimental factorial design. Quality evaluations after sterilization included measurements of $F_0$ value ($Y_1$), peak stress ($Y_2$), pH ($Y_3$), color value ($Y_{4-6}$), and organoleptic test [preference for appearance ($Y_7$), overall acceptability ($Y_8$), and preference for texture ($Y_9$) and egg taste ($Y_{10}$)]. Dependent variables ($Y_{1-10}$) of eighteen conditions were more affected by temperature and time than by the sterilization method. Eight factors were selected among the dependent variables as significant factors related to the quality of the steamed egg. Finally, by establishing an optimum range of each dependent variable and contour analysis, the optimum sterilization conditions for the production of steamed egg were determined to be $120^{\circ}C$ for 25 min using a 2-step sterilization process.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.