• Journal of Mushroom
• /
• v.13 no.2
• /
• pp.114-118
• /
• 2015

Mycoleptodonoides aitchisonii has been used a culinary material and traditional medicine for a long time in worldwide and recently the researches to find biological effects have been increased such as dopamine activation, preventive effect against phytopathogens, inhibitive effect against erythrocyte coagulation, anti-oxidative effect, anti-tumorigenic effect, etc. However it is hard to cultivate Mycoleptodonoides aitchisonii it is impossible to be mass-produced and in order to solve the problem in this study we found the appropriate cultivation period and the harvest point for it. For life cycle (from primordium formation to harvest) the morphology, weight, and quantity of polysaccharide of Mycoleptodonoides aitchisonii were measured using with 5 bodies per a day and it could be divided for 4 stages; primordium formation, growth, needle maturation, and aging. And then from the results the Zeide nonlinear growth curve could be gotten. At 13th day after cultivation there is the relation between the change of media weight and body weight and at 14th day after cultivation the rate of polysaccharide in the body was 11 %. However in the case of O2 insufficient supply the malformation of them was observed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.211-220
• /
• 1998

The stochiometric composition of $AgGaS_2$polycrystal source materials for the single crystal thin films were prepared from horizontal furnace. From the extrapolation method of X-ray diffraction patterns, it was found that the polycrystal $AgGaS_2$has tetragonal structure of which lattice constant $a_0\;and \;c_0$ were 5.756 $\AA$ and 10.305 $\AA$, respectively. $AgGaS_2$single crystal thin film was deposited on throughly etched GaAs(100) substrate from mixed crystal $AgGaS_2$by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $590^{\circ}C$ and $440^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about 0.5 $mu \textrm{m}$/h. The crystallinity of the grown single crystal thin films was investigated by the DCRC (double crystal X-ray diffraction rocking curve). The optical energy gaps were found to be 2.61 eV for $AgGaS_2$single crystal thin films at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation, then the constants in the Varshni equation are given by${\Alpha};=;8.695{\times}10^{-4};eV/K,and;{\beta};=;332;K$. from the photocurrent spectra by illumination of polarized light of the $AgGaS_2$single crystal thin film, we have found that crystal field splitting $\Delta$Cr was 0.28 eV at 20 K. From the PL spectra at 20 K, the peaks corresponding to free and bound excitons and a broad emission band due to D-A pairs are identified. The binding energy of the free excitons are determined to be 0.2676 eV and 0.2430 eV and the dissociation energy of the bound excitons to be 0.4695 eV.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.761-767
• /
• 2011

Since the "Low Carbon, Green Growth" as a social requirements is attracted public attention, the policies and investments of the railway which have been less estimated than road is re-considered. Since the starting the commercial service (2004. April), the KTX have been operated successfully while transport passengers over 100million for years. And also the project for development of KHST (Korea High Speed Train ; G7) had been accomplished with a good result, the first trainset of KTX-II which base on G7 project was manufactured and testing now. On the other hand, the world's technology of the high speed train is more faster, and changing to a distributed traction system. To catch up the world's leading technology, the HEMU(High-speed Electric Multiple Unit) project will secure new technology and aims to promote the technology of domestic high-speed train. The authors indicates the result of detail review such as a curve, slope of the track and electrical dead section of the catenary to test at 400kph and also the performance simulation of the developed rolling stock in this paper. As the result, the authors devise the test scenario to perform a maximum speed test (stability at max. speed, acceleration & deceleration etc) with the restricted conditions such as track length, track available time etc by considering above result.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.429-433
• /
• 2009

Since the "Low Carbon, Green Growth" as a social requirements is attracted public attention, the policies and investments of the railway which have been less estimated than road is re-considered. Since the starting the commercial service (2004. April), the KTX have been operated successfully while transport passengers over 100million for years. And also the project for development of KHST (Korea High Speed Train ; G7) had been accomplished with a good result, the first trainset of KTX-II which base on G7 project was manufactured and testing now. On the other hand, the world's technology of the high speed train is more faster, and changing to a distributed traction system. To catch up the world's leading technology, the HEMU(High-speed Electric Multiple Unit) project will secure new technology and aims to promote the technology of domestic high-speed train. The authors indicates the result of detail review such as a curve, slope of the track and electrical dead section of the catenary to test at 400kph and also the performance simulation of the developed rolling stock in this paper. As the result, the authors devise the test scenario to perform a maximum speed test (stability at max. speed, acceleration & deceleration etc) with the restricted conditions such as track length, track available time etc by considering above result.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.151-160
• /
• 2006

This study was conducted to investigate the genetic characteristics of growth stages in Hanwoo, to provide useful information in farm management decisions. Data were taken from the nucleus herds of three farms, Namwon, Daegwalyong and Seosan, comprising 27,647 cows, 14,744 bulls, and 1,290 steers in between 1980 and 2004. According to the growth curve by year, the residuals for cows and bulls were 68.49 and 54.29, respectively, under the Gompertz model. The values were lower than in other years. Parameters, A, b and k were estimated as 423.6±5.8, 2.387±0.064 and 0.0908±0.0033 in cows and 823.3±15.3, 3.584±0.070, 0.1139±0.0032 in bulls, respectively. The fitness was higher under the Gompertz model than under the logistic model: monthly and daily estimation for cows were 379.3±7.509, 2.499±0.057, 0.114±0.0045 and 367.1±1.9003, 2.3983±0.012, 0.004±0.00003, respectively. Estimated residual mean squares were 31.85 and 998.4 in their respective models. Monthly and daily estimation of bulls were 834.6±22.00, 3.319±0.062, 0.104±0.0037 and 796.0±6.128, 3.184±0.014, 0.003±0.00003, respectively. Estimated residual mean square were 66.18 and 2106.5. Monthly and daily estimation of steers were 1049.1±144.2, 3.024±0.008, 0.067±0.0096 and 1505.1±176.6, 2.997±0.067, 0.001±0.0001, relatively. Squares, 186.0 and 1119.1. In terms of growth characteristic estimated by Gompertz model, body weight for cows and bulls were 139.53kg and 307.03kg, and the daily gains were 0.52kg and 1.04kg, respectively. Body weight for steers was 385.94kg at the inflection point. Body weight gain was 0.84kg in both models. Our results showed that cows had lower mature weight and daily weight gain, and reached the inflection point earlier than bulls or steers.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.151-162
• /
• 1997

The suitability of pivalic acid was confirmed as a secondary temperature standard material. Triple-point cells of pivalic acid were obtained by using combined process of vacuum distillation with zone refining. A detailed description of the purification process was given. The melting curves were used as criteria for determination of purities of pivalic acid. Triple points of these cells with purity of 99.9997% were measured to be $35.956\pm 0.003^{\circ}C$ by using the melting plateau curves. Thus the triple point cells of pivalic acid appear to be able to use for the calibration of thermistor thermometers with moderate precision.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.471-481
• /
• 1999

The properties of deformed products are generally dependent upon the distribution of microstureture. It is, therefore, necessary to make the distribution of microstureture uniform in order to achieve the best balance of properties in the final product. This is often a demanding task, even for conventional materials. It is become essential to achieving mechanical integrity and a desired combination of microstructure and properties. The objective mechanical integrity and a desired combination of microsttucture and properties. The objective of this study is to design the optimal die profile which can yield more uniform microstructure in hot extruded product. The microstructure evolution, such as dynamic and static recrystallization as well as grain growth, is investigated using the program com-bined with yada and Senuma's empirical equations and rigid-thermoviscoplastic finite element method. The die profile of hot extrusion is represented by Bezier-curve to define all available profile. In order to obtain the optimal die profile which yields uniform microstructure in the product the FPS(Flexible Polyhedron Search) method is applied to the present study. To validate the result of present study the experimental hot extrusion is performed and the result is compared with that of simulation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.5
• /
• pp.367-372
• /
• 2000

The film-type specimen of poly ethylene terephthalate (PET) was stepwise elongated under tension with various speed range of about 0.5~500 mm/min, and then the necking behavior during its plastic deformation was observed. When elongated at the speed range of about 20~100 mm/min, stress oscillation was apparently occurred in the stress-strain curve. When elongated at the speed range of about 200~500 mm/min, stress oscillation was not did. The transparent/opaque zone and cross-section area in the specimen elongated at the speed of about 50 mm/min were examined using the optical microscopy and scanning electron microscopy. The corrosion characteristic of the specimen elongated at the speed of about 50 mm/min in 3.8 M NaOH alkali solution was examined using the optical microscopy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.648-662
• /
• 1996

Electrode surface reaction on glassy carbon and synthesized graphite (PVDF mixed graphite) in sulfuric acid solution is investigated by impedance spectroscopy at cyclic polarization. The redox peak, which may be due to the change of chemical adsorped functional group on electrode surface or oxidation and reduction of oxygen, is represented on glassy carbon and graphite electrode in potentio-dynamic current curve. The oxidation and reduction of these surface functional group on glassy carbon and PVDF mixed graphite have a major affect on the impedance spectrum and Faraday impedance parameter at cyclic polarization.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1571-1584
• /
• 2023

In this study, a numerical analysis was performed as part of an international joint research project to reproduce a real cable tray fire that occurred in the heater bay area of the turbine building of a nuclear power plant. A sensitivity analysis was performed on various input parameters to derive results consistent with the sprinkler activation time obtained from the fire event analysis. For all sensitive parameters, the normalized sprinkler activation time correlated well with the power function of the normalized sprinkler height. A correlation equation was developed to identify the sprinkler activation time at any location when determining the slope or fire growth rate under the conditions assuming a linear or t-squared heat release rate (HRR) time curve. Various cable fire growth assumptions were used to determine which assumption was better to provide the prediction coincident with the information given from the fire event analysis in terms of the sprinkler activation time and total energy generated from cables damaged by fire. In the comprehensive analysis of all the sensitive parameters, the standard deviation of the input parameters increased as the sprinkler height decreased. Within the range of the sensitivity parameter values given in this study, when considering all sprinkler heights, the standard deviation of the cable model change was the largest and that of the overhang position change was the smallest.