• 한국병원경영학회지
• /
• 제5권1호
• /
• pp.232-271
• /
• 2000

The introduction of a team system to any organization is usually to improve that organizations dynamics, by increasing the proper adaptation to rapidly changing environments, by reducing approval procedures, and by promoting power authorization. In this regard, this study was carried out in an attempt to determine (1) whether or not the introduction of a team system can be as effective in hospital organizations as it has been in business organizations, and (2) what behavior factors influence such effectiveness. For the current study, questionnaires were distributed to the employees of a university hospital in Pusan. Four hundred eighty three of them(94.7%) were retrieved and analyzed through statistical processes. The three types of variables that were found to influence team effectiveness were: (1) independent variables of team organization characteristics, such as communication, organizational atmosphere, leadership and team knowledge, (2) intervening variables of team organization characteristics. such as job autonomy, technological variety, task subjectivity, task feedback and task importance, and(3) the dependent variables of team level effectiveness, such as job satisfaction and commitment to team organization. The gathered data were processed by using the 6.12 version of the statistical program SAS(Statistical Analysis System), and the reliance coefficient of those measured variables was then evaluated as an average of 0.78. The influence of team level effectiveness was analyzed by using multiple regression analysis. These differences in effectiveness were then analyzed on the basis of related mean values, while the differences among demo-sociological characteristics were analyzed by using the dispersion analysis(ANOVA) and the t-test. The results of the study can be summarized by the following. First, regarding the relationship between team organization characteristics and team level effectiveness, all of the factors including communication, organizational atmosphere, leadership and team knowledge were found to have a significant influence on effectiveness. Second, the factors of team job characteristics, such as technological variety, task importance and job autonomy, had significant effects on job satisfaction and organizational commitment among the teams members. Team level effectiveness was generally high, while team job satisfaction was higher the teams organizational commitment. Third, regarding the demo-sociological characteristics, team level effectiveness was found to be higher among those who were older, who had more job experience, and who had a higher position. Comparing the differences among job types, the effectiveness was relatively higher in the fields of nursing and administration/management then in other fields. Further study should be done towards the setting of variables for characteristics of hospital organization, developing suitable methods of measurement, and researching individual level effectiveness.

• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.660-675
• /
• 2020

Since Industry 4.0, there is a growing interest in smart manufacturing across all industries. However, there are few studies on this topic in the garment industry despite the growing interest in implementing smart manufacturing. This paper presents the feasibility and essential considerations for implementing smart manufacturing in the garment industry. A systematic review analysis was conducted. Studies on garment manufacturing and smart manufacturing were searched separately in the Scopus database. Key technologies for each manufacturing were derived by keyword analysis. Studies on key technologies in each manufacturing were selected; in addition, bibliographic analysis and cluster analysis were conducted to understand the progress of technological development in the garment industry. In garment manufacturing, technology studies are rare as well as locally biased. In addition, there are technological gaps compared to other manufacturing. However, smart manufacturing studies are still in their infancy and the direction of garment manufacturing studies are toward smart manufacturing. More studies are needed to apply the key technologies of smart manufacturing to garment manufacturing. In this case, the progress of technology development, the difference in the industrial environment, and the level of implementation should be considered. Human components should be integrated into smart manufacturing systems in a labor-intensive garment manufacturing process.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.525-529
• /
• 1996

Decision environments involve a high degree of uncertainty as well as multiple, conflicting goals. Although traditional goal programming offers a means of considering multiple, conflicting goals and arrives at a satisficing solution in a deterministic manner, its major drawback is that decision makers often specify aspiration level of each goal as a single number. To overcome the problem of setting aspiration levels, chance constrained programming can be incorporated into goal programming formulation so that sampling information can be utilized to describe uncertainty distribution. Another drawback of goal programming is that it does not provide a systematic approach to set priorities and trade-offs among conflicting goals. To overcome this weekness, the analytic hierarchy process(AHP) is used in the model. Also, most goal programming models in the literature are of a linear form, although some nonlinear models have been presented. Consideration of risk in technological coefficients and right hand sides, however, leads to nonlinear goal programming models, which require a linear approximation to be solved. In this paper, chance constrained reformulation with linear approximation is presented for a 0-1 goal programming problem whose technological coefficients and right hand sides are stochastic. The model is presented with a numerical example for the purpose of demonstration.

• 한국위성정보통신학회논문지
• /
• 제10권4호
• /
• pp.52-57
• /
• 2015

국가환경위성센터 지상국 개발을 위한 기술기준을 도출하기 위하여 국가환경위성센터 구축을 위한 입지 조건과 향후 개발될 국가환경위성센터 지상국 특성을 분석하였다. 또한, 국가환경위성센터 지상국 특성 분석을 통하여 지상국 시스템의 구성과 내부인터페이스를 도출하였다. 본 논문에서는 국가환경위성센터 운영에 필요한 환경위성지상국의 상위 요구사항과 환경위성지상국 및 위성관제국 간의 인터페이스 요구사항을 제시하였다.

• 한국실내디자인학회논문집
• /
• 제14권5호
• /
• pp.10-17
• /
• 2005

This Study is concerned with the acceptance of Western timber structure and the interior space of church buildings in the early modern period in Korea. Timber roofs have represented a wide variety of constructional forms and have been fundamental to any technological appraisal of the evolution of both of Western and Eastern architecture. Especially the roof structure of the church buildings reflects the technological level, aesthetic sense, and spacial concepts of the age. Between Western timber structure and Korean timber structure, there are many differences in not only structural form but also form of roof, members, load, frame system and etc. And there were various types of framing technique such as timber truss, timber arch, timber vault in the western style church architecture in the early modern period in Korea. I have summarized the character of the acceptance process of Western timber structure and the influences on the interior space of church buildings.

• Structural Engineering and Mechanics
• /
• 제39권4호
• /
• pp.499-520
• /
• 2011

The effectiveness of a technique for the repair of reinforced concrete members in combination with a technique for the repair of masonry walls of infilled frames, damaged due to cyclic loading, is experimentally investigated. Three single - story, one - bay, 1/3 - scale frame specimens are tested under cyclic horizontal loading, up to a drift level of 4%. One bare frame and two infilled frames with weak and strong infills, respectively, have been tasted. Specimens have spirals as shear reinforcement. The applied repair technique is mainly based on the use of thin epoxy resin infused under pressure into the crack system of the damaged RC joint bodies, the use of a polymer modified cement mortar with or without a fiberglass reinforcing mesh for the damaged infill masonry walls and the use of CFRP plates to the surfaces of the damaged structural RC members, as external reinforcement. Specimens after repair, were retested in the same way. Conclusions concerning the effectiveness of the applied repair technique, based on maximum cycles load, loading stiffness, and hysteretic energy absorption capabilities of the tested specimens, are drawn and commented upon.

• Journal of Information Science Theory and Practice
• /
• 제1권1호
• /
• pp.42-53
• /
• 2013

Timely access to quality healthcare information during an outbreak plays an important role in curtailing its spread. The aim of this study was to investigate the information needs and seeking behavior of the general public in Singapore during the H1N1 pandemic. A pre-tested questionnaire was used for data collection. The convenience snowball sampling method was used and 260 working adults and tertiary-level students participated in this study. The most crucial information needs of a majority of the participants were: symptoms of H1N1, causes of the infection, preventive measures, and possible treatments. Data analysis also revealed that mass media such as television, newspapers, and radio were most frequently used for seeking the needed information. The use of human information sources was also quite high while only a small number of the respondents accessed online news and healthcare websites. About three-quarters of the participants indicated that the gathered information helped them to stay vigilant and take necessary precautionary measures. A major problem identified by the participants in using H1N1 information was the lack of understanding of certain terms used in public communications. This paper suggests certain measures for strengthening health information communication during future outbreaks.

• 한국산림과학회지
• /
• 제96권2호
• /
• pp.197-202
• /
• 2007

This study is conducted to investigate the factors affecting lumber conversion rate of sawmill industry in South Korea. Data were obtained from the survey of 38 sawmills in all geographic regions of South Korea. The variables examined in this study were region, softwood/hardwood log, domestic/imported/both log, the number of power-driven carriages (PDC) installed, the year when and country where PDCs was manufactured, the horse power of PDC, the number of labors required to operate each PDC, the sawing capacity of mill (mill size), and the types of major product and by-products. The lumber recovery factor (LRF) of sawmills were significantly influenced by the origin of logs, level of PDC automation, sawmill size, and size of logs (measured in diameter and length) while not by the location of the mill, types of major product and by-product, log species, and characteristics of PDC. Although these results provide useful information for understanding the technological characteristics of the Korean sawmill industry, further investigation with larger sample is necessary to reveal the more reliable characteristics of sawmill industry in South Korea.

• 대한산업공학회지
• /
• 제40권4호
• /
• pp.358-365
• /
• 2014

The purpose of this paper is to analyze the efficiency of government investment in the deployment and technological development of three technological areas - wind power, photovoltaic and fuel cell - of renewable energy in Korea using the DEA (data envelopment analysis). The efficiencies of government investment in renewable energies are measured and compared among three kinds of technologies using the actual data during 2007~2009. In the present DEA model, R&D investment and government subsidies for renewable energy usage promotion are selected as input variables, and the number of patents, supply level, and the production cost as output variable. As a result, it is found that the wind power is the most efficient renewable energy in Korea in the perspective of the efficiency of government investment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권10호
• /
• pp.4933-4956
• /
• 2016

Use-After-Free (UAF) is a common lethal form of software vulnerability. By using tools such as Web Browser Fuzzing, a large amount of samples containing UAF vulnerabilities can be generated. To evaluate the threat level of vulnerability or to patch the vulnerabilities, automatic deduplication and exploitability determination should be carried out for these samples. There are some problems existing in current methods, including inadequate pertinence, lack of depth and precision of analysis, high time cost, and low accuracy. In this paper, in terms of key dangling pointer and crash context, we analyze four properties of similar samples of UAF vulnerability, explore the method of extracting and calculate clustering eigenvalues from these samples, perform clustering by fast search and find of density peaks on a large number of vulnerability samples. Samples were divided into different UAF vulnerability categories according to the clustering results, and the exploitability of these UAF vulnerabilities was determined by observing the shape of class cluster. Experimental results showed that the approach was applicable to the deduplication and exploitability determination of a large amount of UAF vulnerability samples, with high accuracy and low performance cost.