• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2350-2358
• /
• 2016

The one cycle control (OCC) scheme for active power filters (APFs) has shown excellent harmonic suppression and implementation simplicity. However, its real world application is limited because the non-ideal supply voltage for APFs can influence its performance so that the source currents are still distorted after compensation. This paper proposes a modified one cycle control (MOCC) scheme to improve the performance of three-phase shunt APFs under non-ideal supply voltage conditions. In this paper a detailed mathematical derivation has been presented and the key control law of the MOCC has been developed for adaption to the non-ideal supply voltages, following the control philosophy of simplicity. A relatively simple sequence filter is introduced to extract the harmonic components of supply voltages. The modified scheme can be easily implemented. The proposed control strategy has excellent performance and a 5kVA APF hardware platform has been implemented to validate the feasibility and performance of the proposed strategy.

• Journal of Power Electronics
• /
• v.11 no.5
• /
• pp.639-654
• /
• 2011

This paper presents a Current Distribution Control design for Paralleled Positive Output Elementary Super Lift Luo Converters (PPOESLLCs) operated in Continuous Conduction Mode using a Sliding Mode Controller (SMC). Manipulating the higher current requirement of the load through the paralleling of POESLLCs, results in a current inequality. This is mainly due to dissimilarities in the power semiconductor switches and circuit components used in POESLLCs, which may lead to converter failures. In order to balance the proper load current sharing and the load voltage regulation of PPOESLLCs, a SMC is developed. The SMC is designed for the inherently variable-structured of POESLLCs by using the state-space average based model. The static and dynamic performance of the developed controller with PPOESLLCs is validated for its robustness to perform over a wide range of operating conditions through both a laboratory prototype and MatLab/Simulink models, which are compared with a Proportional-Integral (PI) controller. Theoretical analysis, simulation and experimental results are presented to demonstrate the feasibility of the developed SMC along with the complete design procedure.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.3
• /
• pp.212-221
• /
• 2013

As the convergence among technologies is reorganizing industry sectors, it is quite important to evaluate the probability of technological convergence, and to analyze how the technologies in a certain industry sector affect the same or other industry sectors. As a result, the large number of studies have been focused on the industry convergence. However, most of them have dealt mainly with case studies or strategy and policies and few efforts have been made to study it using quantitative data. The investigation of industry convergence using quantitative data will help understand the characteristics of industry and forecast the future of the industry from an objective point of view. Therefore, this research proposes a methodology to evaluate the possibilities of industry convergence using patent data. In particular, we emphasize the possibilities of technology convergence and suggest a technology relationship matrix to evaluate the technology convergence, as an antecedent of industry convergence. The feasibility and utility of the suggested methodology was verified with a case study on the convergence of IT and BT. The research results are expected to provide a useful guideline for developing a measure of convergence.

• Membrane and Water Treatment
• /
• v.13 no.3
• /
• pp.147-166
• /
• 2022

Liquid-liquid membrane contactor (LLMC), a device that exchanges dissolved gas molecules between the two sides of a hydrophobic membrane through membrane pores, can be employed to extract ammoniacal nitrogen from a feed solution, which is transported across the membrane and accumulated in a stripping solution. This LLMC process offers the promise of improving the sustainability of the global nitrogen cycle by cost-effectively recovering ammonia from wastewater. Despite recent technological advances in LLMC processes, a comprehensive review of their feasibility for ammonia recovery is rarely found in the literature. Our paper aims to close this knowledge gap, and in addition to analyze the challenges and provide potential solutions for improvement. We begin with discussions on the operational principles of the LLMC process for ammonia recovery and membrane types and membrane configurations commonly used in the process. We then assess the performance of the process by reviewing publications that demonstrate its practical application. Challenges involved in the implementation of the LLMC process, such as membrane fouling, membrane wetting, and chemical requirements, are presented, along with discussions on potential strategies to address each. These strategies, including membrane modification, hybrid process design, and process optimization based on cost-benefit analysis, guide the reader to identify key areas of future research and development.

• Asian Journal for Public Opinion Research
• /
• v.11 no.2
• /
• pp.145-162
• /
• 2023

This research investigates how users of Bilibili, a video sharing website based in China have responded to carbon neutrality. By conducting quantitative textual analyses on 3,311 comments on Bilibili using LDA topic extraction and content statistics, this research discovers that: (1) Bilibili users have assigned more weight to geopolitical topics (56.3%) than energy (22.0%) and environmental topics (21.7%). (2) When assessing carbon neutrality, Bilibili users considered geopolitical (53.8%) and energy factors (15.8%) more heavily than factors related to the class (9.2%), economy (8.9%), environment (8.7%), and definition (3.6%). (3) More Bilibili users had negative (64.6%) attitudes towards carbon neutrality, with only a small portion of them expressing positive (26.8%) and neutral (8.6%) attitudes. (4) Negative attitudes towards carbon neutrality were mainly driven by geopolitical concerns about the West's approach to China, other countries' free-riding on China's efforts and the West's manipulation of rules, doubts about the feasibility of energy transition and suspicion of capitalists exploiting consumers through this concept. This research highlights the geopolitical concerns behind the environmental attitudes of Chinese people, deepening our understanding to psychological constructs and crisis sensitivity of Chinese people towards environmental issues.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.458-465
• /
• 2020

Technological advances in artificial intelligence are affecting many industries, such as telecommunications, logistics, security, and healthcare, and research and development related to economic, efficiency, linkage with commercial technologies are the current focus. Predicting the changes in the future battlefield environment and ways of conducting war from a strategic point of view, as well as designing/planning the direction of military development for a leading response is not only a basic element to prepare for comprehensive future threats but also an indispensable factor that can produce an optimal effect over a limited budget/time. From this perspective, this study was conducted as part of a technology-driven plan to discover potential future technologies with high potential for use in the defense field and apply them to R&D. In this study, based on research data collected in a defense future technology investigation, the future new technology that requires further research was predicted by considering the redundancy with existing defense research projects and the feasibility of technology. In addition, an empirical study was conducted to verify the significance between the future new defense technology and the evaluation indicators in the AI field.

• Journal of Information Management
• /
• v.40 no.1
• /
• pp.69-86
• /
• 2009

The biggest paradigm of the latest telecommunications is ubiquitous computing. It is a technology basis to realize ubiquitous society that would affect social, economical and cultural industries with positive influence. However, there is a simultaneous concern that the approach to ubiquitous society may violate one's privacy. Therefore, the existence of legal and technological regulation would be the biggest obstacle in further RFID technology and industry dissemination. Also, in business side, they must invest with enormous expense and technology if technological method is only approached for the solution. As in the research, 8 RFID applications, application process and inspection items and 85 appraisal list of "An impact assessment for the privacy protection in RFID applications" developed by P. K. Han(2006), will be used as an indicator to measure RFID privacy impact assessment. In addition, it is to develop RFID privacy impact assessment index by applying objective data with survey of applied specialists. This would provide a data with feasibility and reliability to RFID related companies and able to utilize policy making on RFID private data. In addition, it is expected to contribute as an efficiency tool for individual data to build basis of ubiquitous society.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1352-1358
• /
• 2009

As the demand for a convergence between construction technologies and IT is on the rise, as seen in the visualization of U-City construction, studies on the ways in which IT in should be utilized in the building and construction field have been continuously and actively performed. However, there has been almost no development of standardized technology criteria relating to the life cycle of a building (planning, design, construction, and maintenance). That is, there are almost no examples of efforts made to combine construction technology and IT in a fundamental way, considering the environment, the facility, its spatial characteristics, engineering, materials, and structure, aspects that are commonly required not only for interior spaces but also for exterior construction of U-City. Despite the fact that a state-of-the-art infrastructure has been built, and the competency of users with the cutting-edge technology, composite studies on technologies, facilities, services and spaces are still lacking, and basic research on the composite operation method including compatibility and linkage between facilities and services within a U-City has been insufficient as well. It is generally known that by fusing IT with construction technologies, the total period of construction taken can be reduced and construction expenses can be curtailed, while construction quality can be improved. For this reason, it is vital to prepare a standardized base to connect cutting-edge IT with the construction technologies. In preparing such a base, the most urgent issue is to develop standardized technology criteria. The ultimate objective of this research is to establish the technological criteria system required to apply construction-IT fused technologies to U-Cities, and to develop the technological criteria for the design, construction and maintenance of the U-Cities. This paper, whose objective is to establish development strategies for construction-IT fused technologies by way of analyzing the criteria for conventional construction projects, the necessity of criteria for construction-IT fused technologies, and the current status of U-Cities' development, is the underlying research for this purpose. The strategies established are expected to be utilized in establishing the system of criteria for construction-IT fused technologies, and to contribute to a knowledge base in the construction-IT field. In addition, based on the strategies established, criteria for construction-IT fused technologies, such as design criteria and construction standards, will be developed, and by applying these criteria and standards, the ultimate objectives of U-Cities, which are the enhancement of urban competitiveness and the satisfaction of residents, will be attained

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.609-617
• /
• 2017

Lignocellulosic biomass is a renewable resource for production of biofuels and biochemicals. Furfural (FF) is an important platform chemical catalytically derived from the hemicellulose fraction of biomass. Tetrahydrofurfuryl alcohol (THFA) is a FF derivative and can be used as an eco-friendly solvent with thermal and chemical stability. Despite large numbers of experimental studies for catalytic conversion of FF to THFA, few research have conducted on the economic feasibility for large-scale THFA production from FF. At the stage of assessment of the potential for commercialization of conversion technology, a large-scale process study is required to identify technological bottleneck and to obtain information for solving scale-up problems. In this study, process simulation and technoeconomic evaluation for catalytic conversion of FF to THFA are performed, as the following three steps: integrated process design, heat integration, and economic evaluation. First, a large-scale process including conversion and separation processes is designed based on experimental results. When the FF processing rate is 255 tonnes per day, the FF-to-THFA yields are 63.2~67.9 mol%. After heat integration, the heating requirements are reduced by 14.4~16.4%. Finally, we analyze the cost drivers and calculate minimum selling price of THFA by economic evaluation. The minimum selling price of THFA for the developed process are $2,120~2,340 per tonne, which are close to the current THFA market price.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.103-115
• /
• 2010

Currently, many nations in the world make a strong effort to exploit the new and renewable energy. Tidal energy is the constant and regular power sources with higher and more stable quality compared to other renewable sources. The present paper reports the status of tidal energy analyzing its latest technology and development. In addition, a feasibility study on two types of tidal power plant(TPP) systems is conducted based on many assumptions, conditions and data involved in the Korea environment. The Sihwa and Uldolmok TPP are considered as the reference of tidal barrage(TB) and tidal in stream energy conversion(TISEC) type, respectively. While TB technology is currently mature and reliable, there still remain many environmental issues. Whereas, TISEC is recently received more attention due to its environmental friendly aspect. Therefore, the TISEC is believed to be very promising technology as the TPP. The unit electricity generation cost of Sihwa TPP is approximately 67.3 KRW/kWh. However, considering additional cost of Sihwa lake construction, it increases to 254 KRW/kWh. In Uldolmok, the unit electricity generation cost is calculated to be about 400 KRW/kWh, which is even higher than that of Sihwa TPP. This is ascribed to high cost of TISEC device and construction cost due to its technological infancy as well as relatively small power capacity. Nevertheless, the TISEC technology would be substantially developed in the future due to its many advantageous features.