• 정보관리학회지
• /
• 제23권1호
• /
• pp.41-62
• /
• 2006

사회가 발전함에 따라 연구개발의 필요성이 부각되면서 이를 위한 기술정보서비스의 제공과 이에 대한 평가의 중요성 또한 강조되고 있다. 기술정보서비스의 경제성에 대한 평가는 정보가치의 평가와 마찬가지로 매우 다양하며 또한 기술정보서비스의 하부구조에 의해서 영향을 받기도 한다. 그러므로 기술정보서비스의 생산성 즉 경제성에 대한 평가는 보다 체계적이고 복합적인 접근을 바탕으로 이루어져야 한다.

• International Journal of Railway
• /
• 제7권2호
• /
• pp.35-39
• /
• 2014

Urban subways are one of the main parts of urban transportation networks in every city that always requires much attention in order to improve its efficiency in aspects of safety, reliability speed and costs. As the viewpoint of costs, an accurate design, especially design of vertical alignment, can have a dominant role to reduce the costs of urban railway projects. This paper seeks to evaluate the advantages and disadvantages of designing chain vertical alignment for urban subways in compare to flat vertical alignment. To achieve this goal, line A of Qom subway in Iran was selected as a case study in this research. Five parameters considered in the technical-economical evaluation: (1) energy consumption, (2) rolling stock, (3) operation, (4) civil works and geotechnical and (5) hydrological, drainage and pumping. According to the results, a power saving of about 40% have been estimated in the chain vertical alignment for the train without regenerative braking in compare with the flat vertical alignment, although the power saving was calculated less than 10% for the train with regenerative braking. Finally it was found that due to the modern rolling stock technology, the chain vertical alignment represents fewer advantages in compare to the past years.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.297-305
• /
• 2014

Nowadays new water supply projects have been on the decline as the water-power constructions have saturated, which means that the existing power equipment have slowly aged and they require more efforts to maintain the system performance. An effective asset management method of power equipment has become a great necessity from both economical and technical aspects. To be balanced, the asset management should look into all three parts: management, engineering, and information. The purpose of this paper is to study a Risk-Based Maintenance (RBM) matrix method through the deterioration evaluation algorithm for an efficient reliability assessment of oil-immersed power transformers by considering both asset management and technical evaluation. Make use of this result, the equipment will be decided to be replace or repair otherwise on service.

• 한국태양에너지학회 논문집
• /
• 제28권6호
• /
• pp.70-77
• /
• 2008

The purpose of this study evaluates a feasibility and economical efficiency of new renewable energy. According as weather change is serious problem now days, every people make attention to the reduction of greenhouse gas. The revitalization of new renewable energy creates the variety of energy source, stability of energy supply and reduction of greenhouse gas. In this study evaluates a feasibility and economical efficiency from new renewable energy of various photo voltaics, wind power, small hydro and biogas. Feasibility does in standard of technical characteristic, politic support, marketability, establishment present condition and development aim. Economical efficiency does in standard of developmental unit cost, utilization factor, equipment life, politic support cost, interest ratio. The results of this study were as follows photo voltaics, wind, small hydropower, biogas in order feasibility is high. Developmental unit cost, utilization factor, equipment life, politic support cost and analyzed the relationship of interest ratio fluctuation and economical efficiency. From all new renewable energy the utilization factor most is important in economical efficiency but necessary utilization factor is difficult because environmental problem.

• 농업과학연구
• /
• 제33권2호
• /
• pp.179-193
• /
• 2006

Technical efficiency of semiforcing watermelon growers is 0.8248 on average, and distributed between 0.6744 and 0.9268. The result showed that semiforcing watermelon growers had by 18% of technical inefficiency and could be assumed that increasing technical efficiency could induce watermelon production more increase. Consequently, if growers' technical efficiency were improved while other environments were constant, watermelon production could be increased. Following the results from the inefficiency effect model, all assumption coefficient such as growers age etc, are significant at 10% level. Estimate of dispersion parameter ${\gamma}$ is 0.89, which confirms those differences between practical output and frontier output were derived from the technical efficiencies among growers. Differences of production system between high and low level growers in production efficiency were showed at side altitude, ventilation and heat-retaining in section of facilities and automation, soil test and calcium application in section of environment management, transplant preparation and duration of pollination in section of crop management and shipment place, sorting degree and management record analysis in section of business management respectively. As a result of analyzing consulting data by using standard diagnosis table of watermelon cultivation under structure which cultivated on semi-forced watermelon growers, gap between high and low level growers was 7.0 points in facility automation section, 7.1 points in environment section, 8.8 points in crop management section and 13.6 points in business management section, respectively, which were the biggest one among them. In case of excluding information-related items from the evaluation index of business management section, changes of business achievement are to occur. Therefore, it is recommended for us to review the standard diagnostic table of watermelon cultivation under structure by dividing evaluation index of management section into management and information.

• 농업과학연구
• /
• 제38권1호
• /
• pp.183-190
• /
• 2011

The paper is to analyze multi-attributes for expanding new renewable energy in agricultural sectors which have environmental, technical, economic, and social factors consisting of 15 attributes which have both positive and negative impacts. We applied the analytic hierarchy process (AHP) to data from opinion polls. As a result of the AHP survey, the overall results indicate that the respondents more weight on economical factor than environmental, technical, and social factors for expanding new renewable energy. At the lowest level, a comparison of individual 15 attributes within three factors shows that fixed cost highest in multi-attributes, followed by operating cost, technical superiority. To achieve the public acceptance about expanding new renewable energy in agricultural sectors, the policy-makers should take all relevant factors into account through the decision-making process by the public opinions.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.67-76
• /
• 2004

Because paper industry spends lots amount of water, the recycling of water is very important in economical as well as environmental aspects. In order to optimize the process water recycling system, the efficiency of unit operation for water circulation, such as save-all system, CDS and settling tank, plays an important role in. In this study, the sedimentation efficiency of process water was evaluated by SS measurement with the different amounts of flocculent addition. 3 different kinds of process water were collected from fine paper mill, and applied in laboratory sedimentation equipment for the measurement of settling efficiency of SS materials. The addition amounts of alum and PAC were resulted in optimum efficiency of sediments in the condition of 100 ppm of alum and 500 ppm of PAC respectively. In the comparison of sedimentation efficiency between alum and PAC, alum showed more economical and efficient results. The SS of spill water and the particle size of suspended materials treated by alum flocculents were below 50 ppm and about 1 $\mu$m. It would be considered that the spill water can be substituted to superclear water grade.

• International Journal of Railway
• /
• 제2권1호
• /
• pp.1-7
• /
• 2009

The development of structural solutions for high-speed or very high-speed tracks that minimize total life cycle costs of the system is a key issue to improve the operational profitability of new investments. In opposition to conventional ballasted tracks, slab track solutions can be a cost-effective solution, but only in the cases where the benefits due to the increase in track availability and the reduction of track maintenance offsets its much higher construction costs. In the cases where such investment is not feasible, it is worth to evaluate possible structural improvements to ballasted track that allow reducing its maintenance needs without increasing too much its construction costs. This paper evaluates the design requirements and the impact of improving conventional high-speed ballasted tracks by using a bituminous subballast layer. It is divided into two main parts: first the design requirements of the structural solutions with bituminous subballast and its possible benefits on high-speed track deterioration, and secondly the evaluation of the economic impact, in terms of construction costs, of using this structural solution material in future Spanish high-speed lines.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 1997년도 International Conference MULTIMEDIA DATABASES on INTERNET
• /
• pp.96-113
• /
• 1997

본 연구의 목적은 정보통신 및 컴퓨터 산업분야의 발전과 더불어 나타나고 있는 멀티미디어 현상의 개괄 및 경향 파악을 통해 멀티미디어 데이터베이스 산업의 발전을 위한 기본틀을 제시하는데 있다. 이를 위해 먼저 멀티미디어의 다양한 개념에 대한 평가 및 멀티미디어 서비스와 관련된 경제적, 기술적 토대와 응용분야의 범주를 규정하였다. 이어서 멀티미디어 서비스의 전망에 관하여 독일의 멀티미디어 전문가를 대상으로 실시한 설문조사 결과를 분석하였으며, 국내의 멀티미디어 데이터베이스 현황조사 및 체계화를 시도하였다. 이 결과를 토대로 멀티미디어 서비스의 발전을 위한 경제적, 경영적 의미를 서술하였다.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1379-1389
• /
• 2000

In this study, a design process of robotic cell is presented. This paper focuses only on the automation of workpiece handling with robot. The presented design process enables us to analyze effectiv ely the original production system and to redesign it as an optimum production system with robots. An original production system is analyzed with respect to its economical and technological requirements for automation. If automation of the given production system is feasible, the conceptual design for automation is firstly derived. Next, the detail design is derived for the optimum conceptual design. Finally, an optimum system solution is determined after the economical and technical evaluation of all the derived detail designs. The all specifications of each element of the redesigned production system and its layout are determined at the detail design phase. This paper shows a low cost supporting tool for layout design of robotic cell with SCARA type robots.