• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.163-177
• /
• 2020

Purpose: While it is very important to maintain facilities recently, the introduction and its application of high technology in the facility maintenance industry has increased. It is necessary for high technology to secure reliability through the verification and certification system of diagnostic equipment to have an effective impact in the field, but there is difference between the industry's perspective and realistic level of technology apart from social demand for the system of the system. This paper dealt with the introduction of a verification and certification system for rational facility diagnostic equipment with the opinion survey on managers about the current situation. Method: Survey is carried out targeting managers in the maintenance and construction regarding the necessity and urgency of introducing a verification and certification system to promote the introduction and its application of high technology of diagnostic equipment and facility inspection. Also, the introduction to a verification and certification system was reviewed for advanced facility diagnostic equipment through foreign research about similar systems and comparative analysis of similar systems related to the certification of 21 domestic equipment. Result: It showed that, regarding the application of high technology, it is necessary for most managers to introduce high technology such as drones, robots, etc., in the maintenance industry, and when high technology is introduced, it will have a considerable effect in the field. On the other hand, the current technology level in Korea is relatively low, so it turned out to take a certain amount of time for the application of technology. Also, it was found that the management of reliable facility diagnostic equipment will be possible through the introduction of the verification and certification system for facility diagnosis equipment. Meanwhile, the survey is conducted on similar systems about foreign and domestic diagnosis and measuring equipment, etc., but there is no system to verify and certify equipment applied with high technology directly to facility diagnosis maintenance. However, because Japan has a system of verifying the performance of diagnostic equipment and South Korea has 21 similar inspection and diagnostic equipment certification systems among 186 certification systems, it is considered to be possible to design systems which utilize them. Conclusion: According to the managers' opinion, it seems that the introduction of the system supporting the application of 4th industrial technology for the equipment and the use of the equipment with high reliability has sufficient validity. However, because our high technology level is undervalued compared to the urgency, the system for checking high technology facilities and certifying diagnostic equipment should be to be implemented in form of escalation considering technical use and verification level. Apart from the introduction of the verification and certification system, it is necessary for special investment, support and efforts to promote advanced facility diagnostic equipment.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.37-45
• /
• 1970

The processing management forms of our country's filature factories in 1969 are summarized as follows. (1) About 80％ of total cocoon collection is made within 5 days involving peak day, and 10％ of cocoon collection is finished until 3 days before and after the peak day, (2) About 92％ of alive cocoons transported on unpaved road, and about 40％ of the cocoons purchased by all factories are loaded on trucks from common selling station which is far beyond 40km, therefore a new packing system of alive cocoons to drop the damage of cocoon qualities, should be taken. (3) 22％ of all factories in our. country have only low-temperature cocoon drying machine. Therefore the installment of hot-air cocoon drying machine is required urgently. (4) In view of cocoon qualities in our country, the grouping method of cocoon for reeling. taken by about 50％ of the factories at percent, which classify cocoons for reeling as high group (1,2,3,4 grades) and low group(5,6 grades), will have to be replaced by the method tat classify them high group (1,2 grades) middle group (3,4 grades), low group (5,6 grades). (5) The .ratio of cocoon assorting stood about 10％ in multi-ends reeling, about 15％ in automatic reeling, conclusively, the ratio of cocoon assorting for automatic reeling was higher tan that for multi-ends reeling. One person's ability for a day in cocoon assorting reaches to about 80-100kg. (6) Cocoon cooking condition requires the increase of the cooking time, the pressure and temperature used to be prolonged as much as the qualities of cocoons are material cocoon ior automatic and double cocoon machines are treated uncompletely. (7) Automatic silk reeling is being performed at 1-2$^{\circ}C$ lower in reeling water temperature and operated at about twice velocity. (8) The temperature and humidity of rereeling room stood at 25$^{\circ}C$, 67.2％ R.H and 32.3$^{\circ}C$, 51.9％ R.H of rereeling machine are showed, Average rereeling velocity is 233m/min and large reefs charged for one person are 7.5 reels and form of skein used in all factories is double skein. (9) About 73％ of water sources for filature used under-earth water. About 48％ of all filature factories in our country have not yet water purifying equipments. Installation of the equipment for these factories seems to be urgent, (10) Denier .balance, sizing reel, seriplane, are being used in most factories as self-inspection apparatus. (11) More than 90％ of the factories use the vacum tank in rereeling process and about 20％ of them use it in cocoon cooing process (12) Only 21％ of the factories use chemicals in filature process. About all them use "Seracol 100" in cocoon cooking process and "Seracol 500" in rereeling process, (13) Above survey results explain each all factories show large difference in the processing management. Therefore, it is believed that intercommunication through seminar or technical exchange will contribute to the production evaluation of cocoon in our filature industry.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.156-171
• /
• 2012

It is the time of the Korean Wave booming throughout the world, placing Korean culture in the center of the world and its added value is unaccountable. At this prosperity, the preserving of the archetype of Korean dancing and digital contents making is becoming a task not only for the government but also for the private sector because culture industry has enormous added values. To achieve such goals, contents development is an urgent matter but establishing the value of the archetype of Korean traditional dancing must have priority. The public has to take an active role in rediscovering the values of traditional culture, and as the representative of Korean identity traditional dancing must be the object of a systematic art policy. This study will review the current status of 'digital contents program of the archetype of culture' for traditional dancing and will reconsider the modern value of preserving the archetype of culture to make a suggestion to the direction of culture art policies in the near future. The study acknowledged the lack of technical personnel majoring in the archetype of traditional dancing and the need of reviewing the credibility of historical research procedures. Even with the studies by industry-university collaboration and positioning of specialists, effective policies that will form the foundation for private firms to train personnels is in urgent need. In other words, training personnels, allocation of resource, securing funds, policies promoting collaboration between private and individual businesses, and the commercial recognition at private firms are still far from establishing. This is due to the fact that archetype of culture is not a business that creates revenue immediately, therefore the recognition of traditional dancing as an investable item by business-oriented firms or movements are difficult to find. To overcome such situation, software oriented policies that establish open communication and sharing with the public should be done at first rather than the quantity oriented hardware policies of contents development. Through this process the public can change the attitude on traditional dancing and traditional dancing could be newly recognized as a creative repository of culture and as public businesses giving birth to economic value.

• Korean Journal of Occupational Health Nursing
• /
• v.8 no.2
• /
• pp.193-211
• /
• 1999

This study was carried out to investigate the management and support system affecting to the occupational health nursing services(OHNS) provided in group occupational health agencies(GOHA). Questionnaire was developed and distributed to 82 nurses who were working in GOHA and who agreed to participate in the survey. The results were as follow: 1. OH nurses responded were mostly in the age of twenty to thirties(89%), married(73.7%), technical college graduates(88.9%), worked in hospital(85.4%) and participated more than 1 year in group occupational health services (96.3%). 2. Fifty eight point four percent of the OH nurses worked in number of workplace more than 30 to less than 60 in the OHNS form. The figure of workplaces undertaken by nurses was ranged greatly from 9 to more than 100. Number of employees who cared by nurses were mostly under 5,000 peoples in 93.3%. The types of industry was mostly manufacturing and located in the order of factory complex area, suburban, urban and others. 3. Most OH nurses(87.8%) were fully involved in the OHNS for the SSE. Their working days to visit SSE was 5 days per week(77.8%) and one day in the GOHA at 41.3%. 4. The OH documents using by nurses were found in more than 23 different types. However, they were largely summarized in the types of 'Workplace Health Management Card', 'Personal Health Counselling Card', 'Daily Health Management Report', 'Visiting List of Workplace' and 'Sick Employee List'. 5. The items of laboratory test provided by GOHA were mostly achieved in the purpose of basic health examination. They were used to be the blood pressure check(98.8%), blood sugar test (98.8%), urine sugar and protein(91.4%), SGOT and SGPT(85.3% each), cholesterol (82.9%), hepa vaccine immunization(82.9%), r-GPT(81.7%), hemoglobin(79.3%) and triglyceride(75.5%). 6. The OH nurses(92.7%) followed the work pattern to visit the GOHA before and after small-scale enterprises(SSE) visit by car driven by nurses in 74.3%. They were payed by GOHA for transportation fees in certain amounts. However, nurse is the main person(75.0%) who covers up in case of traffic accident. If the GOHA has no transportation regulation for the formal workplace visit, data showed that nurses had been responsible to take charge(31.7%). 7. The personnel manager who takes in charge for nursing services was 'nurse' in 61.7% and 41.2% worked as the final decision maker related to nursing work. The OH nurses' opinions about factors affecting to the management were classified in the four areas such as 'Nature(Quality) of health professional'. 'Content of OHNS', 'Delivery system of the GOHS', and 'Others'. The factors were indicated highly in 'Authority as health professional', 'Level of perception of director on the OH' and 'Physical work condition for OHNS'. The things that this study suggests in the recommendation would be summarized in such as the management and supporting system working for SSE in the OHNS is necessary to reform thoroughly. The reconsidered aspects might be in the matters of number of workplaces undertaken by nurses, development of effectively practical health documents, preparation for guideline of the laboratory test in the workpleces, establishment of convenient and encouraging support system and cooperation between other health professionals with respect and skill.

• Clean Technology
• /
• v.20 no.1
• /
• pp.42-50
• /
• 2014

In this study, the $Mg(OH)_2$ slurry was made form ferro-nickel slag and then used for $CO_2$ sequestration. The experiments were in the order as leaching step, precipitation, carbonation experiments. According to the leaching results, the optimal leaching conditions were $H_2SO_4$ concentration of 1 M and the temperature of 333 K. In the $Mg(OH)_2$ manufacturing step, NaOH was added to increase the pH upto 8, the first precipitation was confirmed as $Fe_2O_3$. After removal the first precipitation, the pH was upto 11, the $Mg(OH)_2$ was generated by XRD analysis. The $Mg(OH)_2$ slurry was used for $CO_2$ sequestration. The pseudo-second-order carbonation model was used to apply for $CO_2$ sequestration. The $CO_2$ sequestration rate was increased by the $CO_2$ partial pressure and temperature. However, $CO_2$ sequestration rate was decreased when temperature upto 323 K. After $CO_2$ sequestrated by $Mg(OH)_2$, the $CO_2$ can be sequestrated stable as $MgCO_3$. This study also presented optimal sequestration condition was the pH upto 8.38, the maximum $MgCO_3$ can be generated. This study can be used as the basic material for $CO_2$ sequestration by ferro-nickel slag at pilot scale in the future.

• Journal of Korean Academy of Nursing
• /
• v.25 no.3
• /
• pp.581-596
• /
• 1995

Clinical practice in nursing education provides an opportunity for students, through the process of ap-plying theoretical knowledge to practice, and to learn nursing skills as well as being socialized into nursing and as such decrease the reality shock of actual nursing practice. Because of a shortage of nursing faculty, the job of achieving the objectives of the clinical practice had been turned over to the head nurses. This resulted in many problems, such as, unclear location of responsibilities and inadequate feedback from head nurses. Therefore this study was done to introduce and evaluate the use of preceptors as a way to minimize the above problems, and to maximize the achievement of the clinical practice objectives. Using an adaptation of Zerbe's (1991) three-tiered team model, clinical practice was done using a preceptor, a head nurse and a clinical instructor, each with different and well defined roles. The subjects of this study were 67 senior students of the College of Nursing of Y University in Seoul whose clinical practice in adult nursing was carried out between May 1, 1994 and December 8, 1994. There were 22 preceptors who had at least two years of clinical experience and who were recommended by their head nurses. They were given additional education on the philosophy and objectives of the College of Nursing, on communication skills, on the theory and practice of education, and on nursing diagnosis and education evaluation. The role of the preceptor was to work one-to-one with students in their practice. The role of the head nurse was to supervise and evaluate the preceptors. The role of the clinical instructor was to provide the education program for the preceptors, to provide ad-vice and suggestions to the preceptors and to maintain lines of communication with the college. With each of these roles in place, it was thought that the effectiveness and efficiency of the clinical practice could be increased significantly. To evaluate the effectiveness of the preceptorship, the three - tiered model, Lowery's Teacher Evaluation Opinion Form translated and adapted to Korea was used to measure student statisfaction. The Clinical Practice Compentency Evaluation Tool developed by Lee et ai was also used to measure student competencies. The results of this study are as follows 1. The satisfaction with clinical practice was higher with the introduction of the perceptors than it was before they were used. (t=-5.96, p=<.005) 2. The clinical practice competencies were higher with the introduction of the preceptors than it was before they were used(t=-5.l3, p<.005) 3. In order to analyze areas not measured by the quantitative tools additional analysis of the open questions was done. The results of this analysis showed that : 1) The students felt positive about their sense of security, confidence, handling of responsbility, and being systematic. They also felt positive about improvements in knowledge, opportunities for direct care, and socialization. 2) The students felt negative about the technical part of their role, lack of knowledge by the preceptor, unprofessional attitudes on the part of the preceptor, difficulty in the role of the professional nurse(student). 3) The preceptors felt positive about their responsibility, motivation, and relationship with the college. 4) The preceptors felt negative about their bur-den. Introduction of the preceptorship model will lead to change and improvement in the negative factors discussed above, solve problems in the present clinical education system, increase continuity in the education of the students, help with socialization of the students and motivation of the preceptors to up-grade their education and increase their confidence. These objectives must be obtained to further the development of professional nursing, and thus, making the preceptorship a reality is our job for the future.

• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.23-34
• /
• 1989

The great sudenn change of circle of dental laboratory technology brought mary discord between the new growing environmental group and the old group, In order to know the satisfactory degree of dental laboratory heads about all dental College, This Study was conducted for 49 detal technicians who graduated from junior laboratory heads in Seoul and Kyoung Gi area. The results are abtained as follow- 1. By age The degree of Satisfaction of items about all graduate dental technician were "41$\sim$45 age" group 26.53%), "46$\sim$50 age" group 22.45%, "36$\sim$40 age" group 18.36%, "31$\sim$35 age" group 12.24%, "51$\sim$55 age" group and "56$\sim$60 age" group 8.16% 60$\sim$age group 4.08% in order. 2. By Job Career. The Highest degree item out of Satisfaction about all graduated dental dental technician was 21$\sim$25 years group 28.5%, 16$\sim$20 years 20.4%, 11$\sim$15 years group 12.24%, 26$\sim$20%, 6$\sim$10 years group 4.08%, below 5 years group 2.04% in order. 3. By managing term of respondent's dental laboratory. The Satisfactory degree of items about all gradate technician were 7$\sim$10 years group 36.73% over 15 years group 22.45%, 11$\sim$14 years group 20.41%, 3$\sim$6 years group 14.29% below 2 years group 6.12% in order 4. By dental technician number of respondent's dental laboratory. The satisfactory degree intems about man were as follow; 6$\sim$9 persons group is 42.86 % The Satisfactory degree items about woman were one persons group in 34.69% 5. By born place The dental laboratory heads mean of inters about all dental technician were Seoul group 20.64 %, Kyoung Gi 17.20 %, Jen Nam group 14.99 % Chung Nam 9.5%in order 6. The satisfactory degree of items about all graduate dental technician were neither good nor bad group 32.65%, bad 6.12%, By ability of adaptaton, The satisfactory degree items about man were neither good nor bad group 42.86%, bad group 40.82%. The satisfactory degree of items about woman were neither good nor bad group 40.82% bad group 36.73%. 7. By sincerity. The satisfactory degree of items about man dental technician who graduated from Junior College were neither good nor bad group 52.02%, bad group 4.08, The satisfactory degree about woman dental technician graduated from Junior College were neither good nor bad group 42.86%, bad group 6.12%. 8. By ability of basical of items about man were bad group 40.82 %. The satisfactory degree about woman were 46.94%. 9. By cooperation relation ship. The satisfactory degree of items about man were neither good nor bad group 42.86%, bad group 10.20%. The satisfactory degree about woman were neither good nor bad group 42.86%, bad group 10.20 %. 10. By ability of work. The satisfactory degree of items about man were neither good nor bad group 48.98%, bad group 4.08%. The satisfactory degree about woman were neither good nor bad group 42.86%, bad group 6.12 %. 11. By the curriculum of the dental technician. The satisfactory degree of items about man were neither good nor bad group 67.35%, bad group 2.04%, The satisfactory degree about woman were neither good nor bad group 61.22%, bad group 6.12%. 12. By occupational satisfaction. The satisfactory degree of items about all graduate dental technician were fatisfied group 14.29%. By the out look of employment. The satisfactory degree of items about man greduate dental technician were neither good nor bad group 34.69 %, bad group 10.20%, about woman graduate dental technician were neither good nor bad group 44.90%, bad group 10.20%, Their employment prospect is not so bright or oprimistic due to the glut supply by graduates in the job-seeking market 13. The satisfactory rate on the artificial dental manufacturing world in terms of effects produced by juror College graduate dental technicians shared good group 40.82% bad group 2.04% 14. By cognition of the number of graduate dental technician. The satisfactory degree of dental laboratory heads about man graduate dental technician were too many group 38.78%, few group 6.12% about woman graduated dental technician were neither good nor bad group 30.6% few group 10,20%, The employment opportunities for the artifical dental technicians are getting decreased because of their excessive cumber in supply 15. The opinion regarding the initial salary. ranging from \160,000 to \200,000 for the junior college graduate dental technicians shared 57.14%. The top ratio, while the satisfaction reate on the academic study period of "3-year" group shared 22%, also the top ratio. 16. The improvement policy and prblematic issues presonted by the owner and operatore of atriticial dental manufacturing plants are as shown below First; The viewpoint that they contribute to the improvement of people's oral health in terms of their mission as artificial dental technicians. Second: The cultivation of basic technical ability to cope with clinical practice upon graduation Third; They require guidance in study and research in their filed of profession, that tray may beable to estaclish a from theory.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.153-194
• /
• 2009

The resources of outer space are for the common exploitation of mankind, and it is a common responsibility of mankind to protect the outer space environment. With the rapid development of space science and technology, and especially with the busy space activities of some major space powers, environmental contamination or space debris is steadily increasing in quantity and has brought grave potential threats and actual damage to the outer space environment and human activities in space. Especially We must mitigate and seek out a solution to remove space debris which poses a threat directly to man's exploitation and use of outer space activities in the Low Earth Orbit (LEO) and in the Geostationary Orbit (GEO), through international cooperation and agreement in the fields of space science, economics, politics and law, in order to safeguard the life and property of mankind and protect the earth's environment. While the issue of space debris has been the subject of scientific study and discussion for some time now, it has yet to be fully addressed within the context of an international legal framework. During the earlier stages of the space age, which began in the late 1950s, the focus of international lawmakers and diplomats was the establishment of basic rules which sought to define the legal nature of outer space and set out the parameters for space activities and the nature and scope of activities carried out in outer space were quite limited. Consequently, environmental issues and the risks that might arise from the generation of space debris did not receive priority attention within the context of the development international space law. In recent years, however, the world has seen dramatic advances in technology and increases in the type and number of space-related activities which are being carried out. In addition, the number of actors in this field has exploded from two highly developed States to a vast array of different States, intergovernmental and nongovernmental organizations, including private industry. Therefore, the number of artificial objects in the near-Earth space is continually increasing. As has been previously mentioned, COPUOS was the entity that created the existing five treaties, and five sets of legal Principles, which form the core of space law, and COPUOS is clearly the most appropriate entity to oversee the creation of this regulatory body for the outer space environmental problem. This idea has been proposed by various States and also at the ILA Conference in Buenos Aires. The ILA Conference in Buenos Aires produced an extensive proposal for such a regulatory regime, dealing with space debris issues in legal terms This article seeks to discuss the status of international law as it relates to outer space environmental problem and space debris and indicate a course of action which might be taken by the international community to develop a legal framework which can adequately cope with the complexity of issues that have recently been recognized. In Section Ⅱ,Ⅲ and IV of this article discuss the current status of international space law, and the extent to which some of the issues raised by earth and space environment are accounted for within the existing United Nations multilateral treaties. Section V and VI discuss the scope and nature of space debris issues as they emerged from the recent multi-year study carried out by the ILA, Scientific and Technical Subcommittee, Legal Subcommittee of the United Nations Committee on the Peaceful Uses of Outer Space ("COPUOS") as a prelude to the matters that will require the attention of international lawmakers in the future. Finally, analyzes the difficulties inherent in the future regulation and control of space debris and the activities to protect the earth's environment. and indicates a possible course of action which could well provide, at the least, a partial solution to this complex challenge.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.3
• /
• pp.22-31
• /
• 2012

This study was prompted by the recognition that the tenn "Community design" has recently been used in diverse practical fields without prior discussion about its underpinnings, a potentially problematic state of affairs. Based on these problems, this study studied the special quality about the concept of community design. Community design can be discussed from two perspectives. The first views community design as a design that concerns the community, an inhabited area populated with people who have common interests, at least in part because of geographic proximity to each other. The second sees community design as a movement that started in the 1960s and places a great importance on democratic decision making, communication, and collaboration. This study will focus on the latter. This branch of community design encompasses an advocacy planning approach, in which design professionals represent deprived communities in their resistance against comprehensive redevelopment. This was associated to the wider social protest movements of the mid and late 1960s. In the 1970s, this branch of community design was developed alongside community design centers, which provided local-level technical assistance to the communities on a number of issues, such as design and planning. The discussion about community design started in earnest from the early 1980s. A review of the literature m community design reveals several characteristics. First, community design deals with the relationship between the physical environment and several aspects of a region, including the social and cultural. Second, it involves community participation, which many scholars believe is the core of community design. Specifically, community design has been characterized by increased participation and democratic debate and decision making. The Third is about communication methods. Since the 1960s, diverse methods had been developed to promote communication effectively. Finally, community design must consider the relationship between designers, who typically value aesthetics and efficiency of form, and the needs of the community with which they are working. Indeed, some scholars believe that this relationship is generally contentious, although the designer can also be thought of as the facilitator of the community's needs. As community design practice becomes more prevalent, a review of the foundation of institution and policy and the role of experts is also needed. The community design movement bas been theorized ex post facto through diverse discussion that has sought to ascribe meaning and direction to its practice. In other words, the relationship between this theory and practice is cyclical. Therefore, this study can contribute to the virtuous circle.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.65-69
• /
• 2017

Purpose KSNMT(Korea Society of Nuclear Medicine Technology) stepping first step in 1997, has published first journal related with nuclear medicine technology in 1985. With classifying In Vivo Session Dissertation reported in the entire journal, trend of the Dissertation will be studied. Materials and Methods Dissertations which published from 1985 to first half of 2016 in the journal are classified with presentation form and with scanner, And all the data is organized with Excel program. Through the data, the number of dissertations published in each year, the number of dissertation published in details, and keyword distributions in each period are analyzed. Results The number of In-vivo section dissertations was 1151 and the number of In-vivo section dissertations that have common subject with In-vitro section was 28. The number of In-vivo section dissertation in 1980s was 46, in 1990s was 149, in 2000 was 467 and from 2010 to the first half of 2016 was 517. The number of dissertation with original articles was 571, with abstract was 529, with symposium was 31, with special lecture was 25, with review was 11, with interesting image was 7, with poster was 3 and with case report was 2. With symposium and special lecture excluded, which count 56, the number of dissertation with PET was 319, with Planar was 302, with SPECT was 172, with radiopharmaceutical was 113, with guard and safety management 103, with BMD was 28, etc. was 86. The number of dissertation about oncology was 201, about scanner was 179, about cardiovascular and circulatory system was 102, about safe environment was 82, about musculoskeletal system was 76, about nervous nuclear medicine was 66, about quality assurance was 61, about genitourinary system was 56, about endocrine system was 49, about digestive system was 44, about Therapy, about industrial safety was 24, about molecular imaging was 15, infection and inflammation was 9, about respiratory system was 8 and etc. was 108. The mostly used keyword through 1999 to 2005 was PET and through 2006 to 2016 was PET/CT. Conclusion To encourage various dissertations to be submitted, Korea Society of Nuclear Medicine should analyze date about not only about dissertations that are already published, but also about various research materials. Moreover, Korea Society of Nuclear Medicine also have to provide technical support such as sharing big data from homepage and systematical support to its member to publish dissertation that has high impact factor. It is important each individual researcher to have continuing effort as well as each organization cooperation.