• 한국해양공학회지
• /
• 제20권1호
• /
• pp.32-36
• /
• 2006

The initial hull form of a 100 tan, 45 knot class high-speed craft is newly developed. The resistance performances are investigated using a model test at high speed in a circulating water channel. The effect of the initial trim is studied together. Wave patterns are observed to clarify the relationship between the resistance performance and the wave characteristics. It can be found that the initial trim plays a role in increasing the resistance performance above a certain velocity.

• 에너지공학
• /
• 제13권1호
• /
• pp.40-50
• /
• 2004

Treatise that see executed investigation analysis about energy conservation technology, which skill move and skill class of introduction subject, transferㆍintroduction skill form, present condition of technology transferㆍintroduction and necessity etc. to energy conservation technology by program of Korea energy basis plan (1997∼2006) etc. Enforced company which questionnaire object achieves from the end 107 assignment practical used of energy conservation technology development propulsion assignment of Korea energy management corporation (KEMCO) to 1998-200 years and 416 companies related energy saving technology constructed to Korea Institute of Energy Research (KIER) database by post investigation and visit investigation. Question investigation result, transferㆍintroduction fields of energy conservation technology are industry sector, the enterprise size appeared with the fact that the small and medium enteifrise is many most. Also, technology transferㆍintroduction section is plan technique, form with technical cooperative form, amount of money 50,000,000 won under, appeared above 1 years in disturbance duration. In hereafter, technology transferㆍintroduction plan it appeared with the fact that the plan technique is many most.

• Journal of Chest Surgery
• /
• 제17권2호
• /
• pp.171-176
• /
• 1984

Successful correction of the partial form of atrioventricular[AV] canal is now readily achievable. The most challenging technical features of this anomaly are the associated mitral valvular deformity and the frequent inability to obtain mitral competence. Residual mitral incompetence after repair of mitral cleft figures importantly in the causes of early and late failure. So, accurate and complete repair of the mitral valve cleft might be important. Determination of residual severe mitral regurgitation after repair is desirable to permit mitral valve replacement at the time. We have experienced one case of severe mitral regurgitation which was occurred 6 months after repair of partial form of A-V canal [ASD primum] in 22 years old virgin. Pre-op. left ventriculogram revealed severe mitral regurgitation in this patient. We preferred to perform mitral valve replacement with St. Jude valve in this patient at March 1984. Post-op. course was uneventful to now for 5 months and we report this case, review and discuss the literatures.

• Communications for Statistical Applications and Methods
• /
• 제8권2호
• /
• pp.557-564
• /
• 2001

The objective of he study is to record the real conditions along with the soccer ball that is, each player's ball keeping time, the number football keeping, accuracy of passing to other player, direction, etc., on a real-time basis, measure them in numbers and get necessary analyzed output as much as one needs. The study consists of the following stages: (1) Record the data by drawing through Visual Interface on a real-time basis; (2) Graphic windows to display the recorded data item by item in graphic; (3) Form windows to display the individual or team scores anytime when needed; (4) Windows to display the analyzed data in visualized form. The effect of the study is threefold: (1) It inputs all the game-related data on a real-time basis, which was impossible before and shows analyzed contents during the game enabling each tea manager o use; (2) In cse of TV broadcasting or newspaper articles, it explains objectively the situations of he game to the TV viewers or readers; (3) After the game, it provides importance information on each team's playing ability and individual player's technical improvement through data analysis.

• 대한수학회보
• /
• 제32권1호
• /
• pp.19-23
• /
• 1995

We will estimate the lower bound of the first nonzero Neumann and Dirichlet eigenvalue of Laplacian equation on compact Riemannian manifold M with boundary. In case that the boundary of M has positive second fundamental form elements, Ly-Yau[3] gave the lower bound of the first nonzero neumann eigenvalue $\eta_1$. In case that the second fundamental form elements of $\partial$M is bounded below by negative constant, Roger Chen[4] investigated the lower bound of $\eta_1$. In [1], [2], we obtained the lower bound of the first nonzero Neumann eigenvalue is estimated under the condtion that the second fundamental form elements of boundary is bounded below by zero. Moreover, I realize that "the interior rolling $\varepsilon$ - ball condition" is not necessary when the first Dirichlet eigenvalue was estimated in [1].ed in [1].

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.111-116
• /
• 2005

The formwork is very important in terms of time and cost of construction project. There have been ample research efforts regarding to technical issues such as types, specifications, and productivities. However, no previous research has addressed managerial requirements of the formwork. Thus, this paper investigated the present status of form work analyzing a case-study company, and derived an improvement plan for the formwork. The findings includes 1) the needs for increasing use of system forms in order to improve the quality and the safety and 2) further development of management system of formwork in order to enhance the efficiency.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.451-459
• /
• 1997

Current domestic building market is in the face of a tise in construction cost as a result of labor cost and materials problems, so improvements for productivity are doing their best for finding a way out of the difficulties. But the most of technical of from work is just considered the basic role and shape. As for environment protection, the utilization of waste concrete is important. But many of studies were interesting on the resource recycling for structural concrete. The purpose of this study is the development of thin precast form using recycled aggregate and the assembling systems for permanent form by cast-in-place.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.192-197
• /
• 2003

Initial hull form of 3 G/T and $20{\sim}25$ knots class coastal leisure boat is newly developed. The performances, which are resistance, trim and sinkage, are investigated at high speed circulating water channel (CWC). Wave patterns are observed together to make clear the relation between the resistance performance and the wave characteristics.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권1호
• /
• pp.27-36
• /
• 2011

In the proposed paper numerical calculations are carried out using two versions of a three-dimensional, timedomain panel method developed by the group of Prof. P. Sclavounos at MIT, i.e. the linear code SWAN2, enabling optionally the use of the instantaneous non-linear Froude-Krylov and hydrostatic forces and the fully non-linear SWAN4. The analytical results are compared with experimental results for three hull forms with increasing geometrical complexity, the Series 60, a reefer vessel with stern bulb and a modern fast ROPAX hull form with hollow bottom in the stern region. The details of the geometrical modeling of the hull forms are discussed. In addition, since SWAN4 does not support transom sterns, only the two versions of SWAN2 were evaluated over experimental results for the parent hull form of the NTUA double-chine, wide-transom, high-speed monohull series. The effect of speed on the numerical predictions was investigated. It is concluded that both versions of SWAN2 the linear and the one with the non-linear Froude-Krylov and hydrostatic forces provide a more robust tool for prediction of the dynamic response of the vessels than the non-linear SWAN4 code. In general, their results are close to what was expected on the basis of experience. Furthermore, the use of the option of non-linear Froude-Krylov and hydrostatic forces is beneficial for the accuracy of the predictions. The content of the paper is based on the Diploma thesis of the second author, supervised by the first one and further refined by the third one.

• 대한금속재료학회지
• /
• 제49권4호
• /
• pp.281-290
• /
• 2011

In order to gain better understanding of the selective surface oxidation and its influence on the galvanizability of a transformation-induced plasticity (TRIP) assisted steel containing 1.5 wt.% Si and 1.6 wt.% Mn, a model experiment has been carried out by depositing Si and Mn (each with a nominal thickness of 10 nm) in either monolayers or bilayers on a low-alloy interstitial-free (IF) steel sheet. After intercritical annealing at $800^{\circ}C$ in a $N_2$ ambient with a dew point of $-40^{\circ}C$, the surface scale formed on 590 MPa TRIP steel exhibited a microstructure similar to that of the scale formed on the Mn/Si bilayer-coated IF steel, consisting of $Mn_{2}SiO_{4}$ particles embedded in an amorphous $SiO_{2}$ film. The present study results indicated that, during the intercritical annealing process of 590 MPa TRIP steel, surface segregation of Si occurs first to form an amorphous $SiO_{2}$ film, which in turn accelerates the out-diffusion of Mn to form more stable Mn-Si oxide particles on the steel surface. During hot-dip galvanizing, particulate $Fe_{3}O_{4}$, MnO, and Si-Mn oxides were reduced more readily by Al in a Zn bath than the amorphous $SiO_{2}$ film. Therefore, in order to improve the galvanizability of 590 TRIP steel, it is most desirable to minimize the surface segregation of Si during the intercritical annealing process.