• 정보학연구
• /
• 제4권4호
• /
• pp.101-112
• /
• 2001

본 논문의 목적은 가상 과학 박물관 구축에 있다. 소프트웨어의 신기술을 지닌 과학적이고도 기술적인 역량에 집중된 JAVA 3D 와 VR 3D, 멀티미디어와 교육적 자료의 공헌은 가상 과학 박물관을 현실화 시켰다. 즉, 이는 고수준의 정보서비스를 현실화했다. 가상공간의 3차원 서비스와 유용한 과학 정보를 가진 교육적 자료를 제공한다. 결국에는 IT산업에 공헌한다.

• 한국정밀공학회지
• /
• 제31권10호
• /
• pp.935-945
• /
• 2014

This paper presents a new road generative system that employs a pad of preventive overspeed or tollgate. The system consists of pad, shaft, torsional damper, oneway-clutch, gear system, and electricity generator components. When the car driven through the road generation system, it occurred to surplus energy in the DC power. In order to maximize the power of electricity energy harvester, the simulation software is developed. It is used to determine parametric dimension for optimal design with the theoretically calculated results from the simulation software. The transient responses at the conditions of low and high vehicle speed are compared with the calculated results as torque, impact force, power, out energy etc. Consequently, before design a road generation system, the analysis of simulation results shows that the proposed concept and system has efficiency and confidence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.670_671
• /
• 2009

This paper presents a optimum design process for static torque characteristics of the Claw-Poles PM Stepping Motor(CPSM). Since the shape of CPSM changes along with axial direction, CPSM should only be analyzed by 3D-FEM. But 3D-FEM needs too much computation time and computer resources. Therefore, it is essential to reduce the number of 3D-FEM analysis models. In this paper, two design factors which affect the static torque characteristics of CPSM were selected. Optimum design process was able to make progress by using Pattern Search Algorithm and 3D-FEM. Finally, optimized model was compared with a conventional model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1517_1518
• /
• 2009

Interest has grown recently in the concept of "unconventional nanofabrication", the creation of nanoscale features by methods that avoid the technical hurdles and high cost of nano-lithographic processes. One of the challenges has been to reliably and inexpensively produce channels of nanometer dimension, as small as 60 nm, in the materials commonly used for soft lithography. In this manuscript, we present new approaches based on simple concepts of wrinkle and buckling patterns.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.709-712
• /
• 2003

The existing technical limitation makes engineer imitate nature to solve engineering problems. Recently Micro Air Vehicle(MAV) imitating the mechanism of birds or insects is being developed. Especially Ultra Flite supported by DARPA is studying hummingbird aerodynamics to relate that information to MAV. To drive MAV bender piezoelectric(PZT) actuators are used due to the convinience of control and the small size. But the displacement of the PZT actuators are very small, and the wing driving mechanism which amplifies the stroke generated by the PZT actuators has constraints in design and manufacture because of the small dimension. In this paper a wing design concept and a efficient driving mechanism are proposed. Electroactive polymers(EAPs) are used as wing mechanism actuators. Using OpenGL the mechanisms are simulated graphically. Also a prototype actuator is being developed and verified by digital Mockup with CATIA. Basic kinematics of the mechanism is studied.

• 산업경영시스템학회지
• /
• 제19권38호
• /
• pp.1-7
• /
• 1996

프랙탈이란 말은 라틴어 Fractus(부서진 상태를 뜻함)에서 유래되었으며, 1975년 Mandelbrot가 수학 및 자연계의 비정규적 패턴들에 대한 체계적 고찰을 담은 자신의 에세이의 표제를 주기 위해서 만들었다 (〔6〕). 프랙탈을 기술하는데 있어서 가장 중요한 양은 차원(dimension)으로 프랙탈 차원은 정수차원이 아닌 실수 차원을 갖는다. 이 논문에서는 box counting 차원, Hausdorff 차원, s-potential 및 s-energy등에 대한 정의를 하고 정리 2.8, 정리 3.1및 정리 3.2을 증명하고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.36-40
• /
• 2003

On analyzing the power circuit of a DVR system, control limitations and control targets are presented for the voltage compensation in DVRs. The control delay in digital controllers increases the dimension of the system transfer function one degree higher which makes the control system more complicate and more unstable. Based on the power stage analysis, a novel controller for the compensation voltages in DVRs is proposed by a feedforward control scheme. Proposed controller works well with the time delay in the digital control system. This paper also proposes a guide line to design the control gain, appropriate output filter parameters and inverter switching frequency for DVRs in digital controllers. Proposed theory is verified by an experimental DVR system with a typical digital controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.527-529
• /
• 2001

Interfaces are the point of interconnection between distributed generation and the energy infrastructure. These interfaces are generally physical but can include a market dimension as well. While there are issues surrounding various interfaces, the most important issues in the short term are on the electrical interface. Much of the discussion and debate surrounding distributed generation interconnection has centered on technical issues. However, there are two elements of Interconnection that merit equal consideration-process and contractual issues. The solution of distributed generation Interconnection issues depends on whether existing requirements can be modified to make them more efficient, transparent, and standardized while maintaining the grid's reliability and safety. In this paper, two main courses, standardization and third party participation, are suggested for the resolution of these issues.

• 동굴
• /
• 제78호
• /
• pp.1-8
• /
• 2007

The combination of mechano-chemical activation (MCA)and Self-propagating High-temperature Synthesis (SHS) has widened the technical possibilities for both methods. For YBCO systems the investigation showed that a short-term MCA of initial powders before SHS leads to single-phase and ultra-fine products. A new technique for preparation ultra-fine high-temperature superconductors (HTS) of YBCO composition with a grain size d <1m is developed using combination of MCA and SHS. The specific feature of the technique is formation of the $YBa_2Cu_3O_7-$ crystalline lattice directly from an X-ray amorphous state arising as a result of mechanical activation of the original oxide mixture. The technique allows the stage of formation of any intermediate reaction products to be ruled out. X-ray and magnetic studies of ultra-fine high temperature superconductors are carried out. Dimension effects associated with the microstructure peculiarities are revealed. A considerable enhancement of inter-grain critical currents is found to take place in the ultra-fine samples.

• Structural Engineering and Mechanics
• /
• 제28권6호
• /
• pp.635-658
• /
• 2008

An application is presented of a modified Vlasov model to the free vibration analysis of plates resting on elastic foundations. The effects of the subsoil depth, the ratio of the plate dimensions, the ratio of the subsoil depth to the plate dimension in the longer direction, and the value of the vertical deformation parameter within the subsoil on the frequency parameters of plates on an elastic foundation are investigated. This analysis has been caried out by the aid of a computer program. The first ten frequency parameters are presented in tabular and the graphical forms to evaluate the effects of the parameters considered in this study. Then mode shapes corresponding to the first six of the frequency parameters are given in graphs. It is concluded that the effect of the subsoil depth on the frequency parameters of the plates on an elastic foundation is generally larger than those of the other parameters considered in this study.