• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.4
• /
• pp.1073-1084
• /
• 2016

The purpose of this study is to present the correct direction of research in related fields by analyzing the trends in the domestic study right to be forgotten. In this study, the final selection of 80 pieces of research papers in various disciplines to search for the study and were analyzed by setting the seven criteria and three research questions. Results, notice that significantly increase the amount of research around the social sciences, starting with the EU rules(draft) has been published in 2012, and around the problem navigating the Law oriented research actively done through a literature review and legal research methods can. Intensive study of the protected rights and the conflict in time towards the latter subject was also increased. The right to be forgotten when considering that big data, digital information such diverse and complex technical issues (service), which still lacks support the implementation of the rights ithil research is desperately needed to know the future with the realization that the scope and research methods. The purpose of this study is to present the research direction of the limits intended for domestic research, but realize effective right to be forgotten by future foreign comparative analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1431-1438
• /
• 2015

According to the report from OECD, 80% of world trade quantity was influenced by standard, 50% of EU trade demand certification of forced standard. This leads to develop standard connected with R&D in most country and company worldwide. Recently, Technical standards have advantage of reduction of production cost and market dominating power. Standardization of construction technology has very important role that ouput of R&D refer to KS, national construction standards and it activates in the market. However, domestic construction research related to effectiveness of standadization fall short of expectation in comparison with manufacturing industry. This study present criteria that can analyze the performance and effectiveness in construction R&D project connected with standardization. And it applied domestic R&D cases (finished from 2000 to 2009), analyzes ouput of standadization and economic effect to verify the value of construcion technology standardization.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.423-428
• /
• 2016

The last stage blades of a low pressure (LP) turbine get frequently fractured because of stress corrosion cracking. This is because they operate in a severe corrosive environment that is caused by the impurities dissolved in condensed steam and high stress due to high speed rotation. To improve the reliability of the blades under severe conditions, 12% Cr martensitic stainless steel, having excellent corrosion resistance and higher strength, is widely used as the blade material. This paper shows the result of root cause analysis on a blade which got fractured suddenly during normal operation. Testing of mechanical properties and microstructure examination were performed on the fractured blade and on a blade in sound condition. The results of testing of mechanical properties of the fractured blade showed that the hardness were higher but impact energy were lower, and were not meeting the criteria as per the material certificate specification. This result showed that the fractured blade became embrittled. The branch-type crack was found to have propagated through the grain boundary and components of chloride and sulfur were detected on the fractured surface. Based on these results, the root cause of fracture was confirmed to be stress corrosion cracking.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.8 no.1
• /
• pp.5-11
• /
• 1997

To set up an objective basis for the evaluation of the stroboscopic findings, video-strobolaryngoscopic images of vocal fold vibration in 5 female and 5 male normal speakers were analyzed using an image analysis computer program called KSIP(Kay Storoboscopy Image Processing, Kay Elemetrics Corp., NJ, USA). Four consecutive vibratory cycles were compared in comfortable, louder, high-pitched /ee/ phonation for every subject. findings mostly replicated earlier studies including glottal chinks which were observed in most female speakers throughout the cycles and clear distinction between female and male speakers in their vibratory patterns as well as intensity and frequency-re-lated differences. However, there were some findings incompatible with those from previous studies which may be attributable to technical problems. This study may provide an objective basis of the stroboscopic findings such as image shape, amplitude, area, and their changes according to frequency and intensity variations. We anticipate that funker study with larger samples ran provide an objective criteria for normal vibratory characteristics of the laryngostro-boscopic findings.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.85-94
• /
• 2005

Post-tensioned Precast concrete System(PPS) consists of U-shaped precast wide beams and concrete column. The continuity of beam-column joint is provided with floor concrete cast on the PC shell beam and post-tensioning. The purpose of this paper is to evaluate the response of PPS interior beam-column joint subjected to cyclic lateral loading. To this end, an experimental investigation was performed with three half-scale specimens of interior connection. The design parameters are the amount of beam reinforcement placed inside the joint core. The test results showed that cracks were distributed well without my significant degradation of strength and ductility. Also, it was found that the prestressing may affect to alter the torsional crack angle. And the specimens sufficiently resist up to limiting drift ratio of 0.035 in accordance with the provisional by ACl of acceptance criteria for concrete special moment frames.

• The Journal of Engineering Geology
• /
• v.28 no.2
• /
• pp.277-295
• /
• 2018

As it has become difficult to secure new water resources through dam construction due to the critical social public opinions on dam construction from 10 years ago, it is necessary to review the existing water resources through the review of existing dams. Accordingly, access methods, such as planning, construction and management, were carried out using technologies already accumulated in relation to the repair and reinforcement of the dam. As a result of the repair and reinforcement, permeation grouting has been performed in many dams, but the establishment of the technology is insufficient so far, and the published paper at home and abroad is extremely rare. In this thesis, low-pressure penetration and grouting reinforcement technologies for the YC dam are analyzed in detail. As a result, penetration grouting has shown that it can be effectively applied to the improvement in the constallability of the core fill-like a YC dam. In addition, the technical details of the experience-proven penetration grouting are given in relation to the injection criteria. It is deemed that the specific analysis data of the Fill Dam penetration grouting technology through this study can be used as useful data for strengthening the repair of Fill Dam and reservoir.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.1
• /
• pp.35-43
• /
• 2000

Objective : Percutaneous lumbar approaches such as arthroscopic discectomy, laser discectomy, and nucleotome remain controversial and have technical limitations to free fragment disc, bony pathology and access to L5-S1, The purpose of this study was to determine efficacy of this new endoscopic system and to report techniques and tactics. Methods : From July 1997 to May 1998, we treated 40 consecutive patients(43 levels) with the MED system. Mean age was 32 years(range ; 18 to 62). There were 30 males and 10 females. All patients had sciatica with SLRT limitation. There were 23 patients with disc herniation at L4-5 and 14 patients at L5-S1. Three patients had 2 level disc herniations. There was one far lateral disc herniation at L4-5. Results : Using modified MacNab criteria, there were 37 excellent results and 3 good result. Most patients were discharged within 3-4 days except 2 patients with dural tearing. There were no other complications. Mean operation time was 1.5 hours(range : 40 minutes to 2.5 hours). Conclusion : The MED system is a reliable approach to lumbar disc herniations. This system combines the advantages of conventional open surgery and a minimally invasive technique. As tactics for the doctors who wish to attempt, "palpate" the lamina by first dilator, identification of interlaminar space by removal of overlying soft tissue and confirmation of the shoulder portion of nerve root before discectomy are important to this procedure. We conclude that lumbar disc herniations can be successfully treated with MED approach.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.4
• /
• pp.768-798
• /
• 2016

This study started from the awareness of the issue if the citation index newly introduced to evaluate the quality of papers satisfies the proper timing matter, which is a component of performance indicators for the evaluation of government-funded R&D institutes. Accordingly, the study will propose improvement ways to shift the previous evaluation system to quality evaluation for mission-oriented R&D institutes by analysing and using the periodical characteristics such as citation half-life and immediacy index of papers. As a result, it turned out that the speed of academic change is getting faster in proportion to the dependency on the technological development but that the citation speed in the field of public technology is relatively slower and the speed of knowledge transfer in the fields related to industry is faster. In addition, the citation index among the R&D fields showed no differences, and the minimum period for citation index measurement with validity should be over 6 years. The problems of evaluation for mission-oriented R&D institutes were deducted based on the technical and statistical analysis results of the temporal characteristic of citation necessary for quality evaluation of performance among R&D fields. To solve the problems, policy alternatives for object and valid quality evaluation were proposed from the points of evaluation period and evaluation criteria.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.531-542
• /
• 2017

The structural safety of small craft, such as steel ships and FRP ships, can be estimated using the measurement test of the hull plate thickness or the longitudinal bending strength test. A polyethylene boat is made using inexpensive HDPE and can be mass produced. The structural safety of a polyethylene boat cannot be guaranteed because a polyethylene boat hull is notspecified in the KR technical rules. The inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 propose the structural strength required for small crafts as the drop test height. Therefore, in this study, the drop test of a polyethylene boat hull was carried out based on the inspection procedure of a sailing yacht and pleasure boat and the drop test method of ISO standard 12215-5. The drop load was acquired by the drop acceleration ofa boat hull. Structural analysis and safety of a polyethylene boat were performed by the drop load and allowable stress criteria. The calculation results of the hull plate thickness by structural design specification of ISO standard 12215-5 showed that polyethylene boat hull was more than two times thicker than a steel ship hull and the boat hull determined by the inspection procedure of sailing yacht and pleasure boat and drop test method of ISO standard 12215-5 was more than 1.2 times thicker than the boat hull determined by structural design specification of ISO standard 12215-5. Therefore, inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 was much more conservative than the structural design specification of ISO standard 12215-5 and could be used as the structural design method of a polyethylene boat.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.53-61
• /
• 2013

Since the 2000s, to start inducement of SCR(Selective Catalytic Reduction) denitrification facility by large scale companies which are emitted large amount of nitrogen oxides such as power plants, combined heat and power plant, incinerators and chemical plants due to take effect the regulation of stationary sources of nitrogen oxide(NOx), and the total amount of discharged pollutants, such as regulatory gradually emissions regulations are being strengthened and the expanded coverage due to the use of SCR denitrification catalyst is a growing trend. Since 2010 due to the new catalysts to replace the already installed power plants and incinerators due to inactive, and catalytic denitrification SCR waste catalyst waste as a resource rather than the development of technologies for recycling situation is urgently needed. In this study, analyzed paper and patent for recycling technologies of waste catalyst. The range of search was limited in the open patents of USA (US), European Union (EP), Japan (JP), Korea (KR) and SCI journals from 1975 to 2012. Patents and journals were collected using key-words searching and filtered by filtering criteria. The trends of the patents and journals was analyzed by the years, countries, companies, and technologies.