• Journal of radiological science and technology
• /
• v.45 no.2
• /
• pp.127-134
• /
• 2022

In order to overcome the image quality limitations of the conventional C-arm, a flat panel detector (FPD) is used to enhance spatial resolution, detective quantum efficiency, frame rate, and dynamic range. Three-dimensional (3D) visualized information can be obtained from C-arm computed tomography (CT) equipped with an FPD, which can reduce patient discomfort and provide various medical information to health care providers by conducting procedures in the interventional procedure room without moving the patient to the CT scan room. Unlike a conventional C-arm device, a C-arm CT requires different basic safety and essential performance evaluation criteria; therefore, in this study, basic safety and essential performance evaluation criteria to protect patients, medical staff, and radiologists were derived based on International Electrotechnical Commission (IEC) standards, the Ministry of Food and Drug Safety (MFDS) standards in Korea, and the rules on the installation and operation of special medical equipment in Korea. As a result of the study, six basic safety evaluation criteria related to electrical and mechanical radiation safety (leakage current, collision protection, emergency stopping device, overheating, recovery management, and ingress of water or particulate matter into medical electrical (ME) equipment and ME systems: footswitches) and 14 essential performance evaluation criteria (accuracy of tube voltage, accuracy of tube current, accuracy of loading time, accuracy of current time product, reproducibility of radiation output, linearity and consistency in radiography, half layer value in X-ray equipment, focal size and collimator, relationship between X-ray field and image reception area, consistency of light irradiation versus X-ray irradiation, performance of the mechanical device, focal spot to skin distance accuracy, image quality evaluation, and technical characteristic of cone-beam computed tomography) were selected for a total of 20 criteria.

• Korean Journal of Food Science and Technology
• /
• v.25 no.2
• /
• pp.98-104
• /
• 1993

In order to improve qualities of kochujang, various fruit juices such as apple, orange, pineapple and grape were added to the raw material of kochujang instead of the part of water. It was apparent in the kochujang with pineapple juice that organic acids originated from fruit juices increased titrable acidity and decreased pH. Free sugars and organic acids in the kochujang that was fermented during three months were degraded or might be used by microorganism after ten months of fermentation. Kochujang with grape juice showed relatively dark color, which had a good agreement with the changes of Hunter a-value. Sensory evaluation test about tastes, flavor and color showed that the kochujang with pineapple juice was preferred to others.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.49-55
• /
• 2013

To explore the paper materials for restoration of the Annals of the Joseon Dyansty, durability of the three type of the traditional Korean Papers were estimated in this study, through moist heat artificial aging test. Three types(D, F, and G) which showed the best preservation performance in dry heat and UV treatment in the previous study were selected and artificial accelerated aging treatment with moist-heat process was conducted; the viscosity change rate was D>G>F; folding endurance G>D>F; $L^*$ value F>D>G; $a^*$ and $b^*$ change rate D>G>F; brightness decrease rate D>G>F, suggesting paper F showed the least change rate in physical/optical properties. Also the CLSM image observation showed fair coherence among fibers and confirmed paper mulberry. And in FDI extraction from each sample, paper F showed the highest value. Overall, paper F (traditional glossy paper) showed the highest stability against thermal treatment. It confirms that paper F is suitable as restoration paper for tributary remains including the annals of the Joseon Dynasty for its steady strength/viscosity decrease rate and color change rate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.174-183
• /
• 2006

The resistance spot-welded region in most current finite element crash models is characterized as a rigid beam at the location of the welded spot. The region is modeled to fail with a failure criterion which is a function of the axial and shear load at the rigid beam. The role of this rigid beam is simply to transfer the load across the welded components. The calculation of the load acting on the rigid beam is important to evaluate the failure of the spot-weld. In this paper, numerical simulation is carried out to evaluate the calculation of the load at the rigid beam. The load calculated from the precise finite element model of the spot-welded region considering the residual stress due to the thermal history during the spot welding procedure is regarded as the reference value and the value of the load is compared with the one obtained from the spot-welded model using the rigid beam with respect to the element size, the element shape and the number of imposed constraints. Analysis results demonstrate that the load acting on the spot-welded element is correctly calculated by the change of the element shape around the welded region and the location of welded constrains. The results provide a guideline for an accurate finite element modeling of the spot-welded region in the crash analysis of vehicles.

• Journal of radiological science and technology
• /
• v.42 no.4
• /
• pp.259-263
• /
• 2019

This study was purpose to compare image quality of Indirect digital radiography (IDR) system by using the International electro-technical commission standard(IEC 62220-1) which were applied to IEC in medical imaging. To evaluation the analysis of Modulation transfer function(MTF) measurements edge device each angle by using edge method. In this study, Aero (Konica, Japan) which is Indirect flat panel detector(FPD) was used, the size of image receptor matrix $1994{\times}2430$ which performed 12bit processing and pixel pitch is $175{\mu}m$. In IEC standard method were applied to each angle were compared. The results of shown as LSF at $2.0^{\circ}$ and $3.0^{\circ}$ angeles. Shape is constant and shows smooth shape. The amount of data seemed reasonable and 2.19 cycles/mm and 2.01 cycles/mm at a spatial frequency of $2.0^{\circ}$ and $3.0^{\circ}$ at an MTF value of 0.1. At an MTF value of 0.5, the spatial frequencies were $2.0^{\circ}$ and 1.11 cycles/mm and 0.93 cycles/mm at an angle of $3.0^{\circ}$. This study were to evaluate MTF by setting the each $2{\sim}3^{\circ}$ each angle and to suggest the quantitative methods of measuring by using IEC.

• Journal of Information Technology Applications and Management
• /
• v.20 no.4
• /
• pp.235-247
• /
• 2013

The evolution of information technology and proliferation of hospital management and managerial applications of computing has led to change in the characteristics, uses and evaluations of software for the hospital management. With the growing proliferation of microcomputer use and the value-added for management strategies, more and more software has been massively developed, produced and distributed for the hospital industry. The user is faced with an increasingly difficult choice in the evaluation and selection of software. For many reasons, users frequently must rely on expert evaluations of the technical functions and quality of software. The objectives of this study are to provide selection criteria for an Electronic Medical Record (EMR) and to develop an evaluation framework for the Hospital Information Systems. The major findings of our study are as follows (1) the identification of EMR evaluation characteristics (2) the design and development of EMR selection model and (3) the evaluation of the importance for EMR characteristics using Analytic Hierarchy Process (AHP). We identify 6 characteristics and 22 sub-characteristics of the EMR, calculate their weights, and decide the best configuration. Especially, the AHP methodology can be applied to gather knowledge from multiple experts. Because AHP can 1) facilitate the participation of multiple experts 2) increase group productivity and therefore result in both quantitatively and qualitatively superior outcomes than that of a single individual's work 3) provide a mechanism for reconciling conflict from multiple expert 4) validate the acquired knowledge, providing consistency of facts, and 5) enhance the accuracy reliability of the acquired knowledge increase through of the reliability provided by consensus across multiple experts. Although some further research is required, the proposed model can be regarded as a basis for the selection of EMR.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.154-162
• /
• 2008

Ministry of construction and transportation has been enforcing extensionally design phase VE(Value Engineering) to the construction costing more than 10 billion won, an importance of design phase VE accordingly is raising to get rid of a waste of cost and noneffective factors previously in construction projects. Although there are legal supports and technical effects, an effect about an introduction of design phase VE can not be applied properly because of several problems at the process. So, in this study, present competency factors of design phase VE to highly raise the output through organizing an effective team at the beginning stage of design phase VE. Find out 29 competency factors through characteristics of design VE team for the check list, classify by team knowledge, team work skill, and team attitude. Get an efficiency regarding importance and find out Competency Evaluation items of design VE team, present a Competency Evaluation plan for indicating an objective standard to Competency Evaluation by measuring relative importance as to each Competency Evaluation item.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.253-258
• /
• 2006

This paper aims to measure and evaluates the technical efficiency with two inputs and four outputs with the use of fuzzy DEA(Data Envelopment Analysis) in Korean RCC(Rescue Co-ordination Center)/RSC(Rescue Sub-Center). Especially, this paper included not only the marine accident data which occurred for the analysis in particular but also the possibility data of a potential marine accident by an Environmental Stress value and analyzed the technical efficiency. And in this paper, asymmetrical triangular fuzzy number is presented about inputs/ outputs data and a procedure is suggest for it solution. The basic idea is to transform the fuzzy CCR model into a crisp linear programming problem by applying an alternative ${\alpha}-cut$ approach. Also this paper propose a ranking method for fuzzy RCC/RSC using presented fuzzy DEA approach. The result, when ${\alpha}-cut$ is 0.5, efficiency priority should be in order to YS, BS, MP, TS, JJ, PH, US, IC, SC, DR, GS, TA, WD RCC/RSC. Finally, Inefficiency TA, WD RCC/RSC have to benchmarking with reference sets.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.2
• /
• pp.255-261
• /
• 2013

This study investigated changes in the physicochemical characteristics and coffee flavors of coffee beans under different roasting conditions. Four different kinds of roasted coffees were analyzed using a headspace gas chromatographic technique. The moisture content and total acidity of roasted coffee decreased whereas the pH and weight loss (%) increased, as coffee beans were roasted at higher temperatures. The Hunter's color values of the roasted coffee (indicating L (lightness) and b (yellowness)) decreased as the roasting temperature of the coffee beans increased, but a (redness) value only increased with light roasting. We also noted that the color of the Arabica coffee was darker than that of the Robusta coffee. The aroma compounds, acetaldehyde, acetone, 2-methylfuran, 2-methylbutanol, 2-methylpyrazine, furfural, 2-propanone, furfuryl alcohol, 2,5-dimethylpyrazine and furfuryl acetate were mainly analyzed. A sensory evaluation of all light-roasted coffees had flavor and sourness and those of all medium-roasted coffees had heaviness and finishness.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.4
• /
• pp.40-48
• /
• 2023

This study is part of a foundational research effort aimed at developing a suitability index for breeding grounds related to avian activities along the domestic South and West coasts, including islands. Focus Group Interviews (FGI) and Analytic Hierarchy Process (AHP) analyses were conducted. The results are as follows. First, as a result of determining the value of the suitability of coastal bird breeding sites, the 'Natural Value(0.763)' was higher than the 'Artificial Value(0.237)'. Other artificial values were identified as sub-ranked except for 'Protected Areas' to ensure continuous integrity of breeding spaces. Second, as a result of re-establishing the 25 evaluation items classified in the two-time FGI as higher concepts, nine natural values and five artificial values were finally selected as a total of 14. Third, the results of the mid-classification evaluation of the importance of the suitability of coastal bird breeding sites were identified in the order of 'Ecological Value(0.392)', 'Topographic Value(0.251)', 'Passive Interference(0.124)', 'Geological Value(0.120)', and 'Active Interference(0.113)'. Fourth, the results of the priority of evaluation items of coastal bird breeding sites were in the order of 'Vegetation Distribution (0.187)', 'Area of Mudflats(0.118)', 'Presence or Absence of Mudflats(0.092)', 'Appearance of Natural Enemies(0.087)', 'Protected Areas(0.08)', 'Island Area (0.069)', 'Over-Breeding devastation(0.064)', 'Soil Composition Ratio(0.056)', 'Distance from Land(0.054)', 'Ocean farm area (0.045)', 'Cultivated land area(0.041)', 'Cultivation behavior(0.038)', 'Angle of the Surface(0.036)', and 'Land Use(0.033)'. It is judged that the weighting result value of the evaluation items derived in this study can be used for priority evaluation focusing on the coastal bird breeding area space. However, it seems that the correlation with the unique habitat suitability of bird individuals needs to be supplemented, and spatial analysis research incorporating species-specific characteristics will be left as a future task.