• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.13-18
• /
• 2004

This study was designed to establish working range for reoportable range in own laboratory in order to cover the upper and lower limits of the range in test method. We experimented ten times during 10 days for setting of reportable range with between run for method evaluation. It is generally assumed that the analytical method produces a linear response and that the test results between those upper and lower limits are then reportable. CLIA recommends that laboratories verify the reportable range of all moderate and high complexity tests. The Clinical Laboratory Improvement Amendments(CLIA) and Laboratory Accreditation Program of the Korean Society for Laboratory Medicine states reportable range is only required for "modified" moderately complex tests. Linearity requirements have been eliminated from the CLIA regulations and from others accreditation agencies, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. It is important to assess the useful reportable range of a laboratory method, i.e., the lowest and highest test results that are reliable and can be reported. Manufacturers make claims for the reportable range of their methods by stating the upper and lower limits of the range. Instrument manufacturers state an operating range and a reportable range. The commercial linearity material can be used to verify this range, if it adequately covers the stated linear interval. CLIA requirements for quality control, must demonstrate that, prior to reporting patient test results, it can obtain the performance specifications for accuracy, precision, and reportable range of patient test results, comparable to those established by the manufacturer. If applicable, the laboratory must also verify the reportable range of patient test results. The reportable range of patient test results is the range of test result values over which the laboratory can establish or verify the accuracy of the instrument, kit or test system measurement response. We need to define the usable reportable range of the method so that the experiments can be properly planned and valid data can be collected. The reportable range is usually defined as the range where the analytical response of the method is linear with respect to the concentration of the analyte being measured. In conclusion, experimental results on reportable range using concentrated control sample and zero calibrators covering from highest to lowest range were salicylate $8.8{\mu}g/dL$, phenytoin $0.67{\mu}g/dL$, phenobarbital $1.53{\mu}g/dL$, primidone $0.16{\mu}g/dL$, theophylline $0.2{\mu}g/dL$, vancomycine $1.3{\mu}g/dL$, valproic acid $3.2{\mu}g/dL$, digitoxin 0.17ng/dL, carbamazepine $0.36{\mu}g/dL$ and acetaminophen $0.7{\mu}g/dL$ at minimum level and salicylate $969.9{\mu}g/dL$, phenytoin $38.1{\mu}g/dL$, phenobarbital $60.4{\mu}g/dL$, primidone $24.57{\mu}g/dL$, theophylline $39.2{\mu}g/dL$, vancomycine $83.65{\mu}g/dL$, valproic acid $147.96{\mu}g/dL$, digitoxin 5.04ng/dL, carbamazepine $19.76{\mu}g/dL$, acetaminophen $300.92{\mu}g/dL$ at maximum level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.1-8
• /
• 2017

As the IT environment becomes more sophisticated, various threats and their associated serious risks are increasing. Threats such as DDoS attacks, malware, worms, and APT attacks can be a very serious risk to enterprises and must be efficiently managed in a timely manner. Therefore, the government has designated the important system as the main information communication infrastructure in consideration of the impact on the national security and the economic society according to the 'Information and Communication Infrastructure Protection Act', which, in particular, protects the main information communication infrastructure from cyber infringement. In addition, it conducts management supervision such as analysis and evaluation of vulnerability, establishment of protection measures, implementation of protection measures, and distribution of technology guides. Even now, security consulting is proceeding on the basis of 'Guidance for Evaluation of Technical Vulnerability Analysis of Major IT Infrastructure Facilities'. There are neglected inspection items in the applied items, and the vulnerability of APT attack, malicious code, and risk are present issues that are neglected. In order to eliminate the actual security risk, the security manager has arranged the inspection and ordered the special company. In other words, it is difficult to check against current hacking or vulnerability through current system vulnerability checking method. In this paper, we propose an efficient method for extracting diagnostic data regarding the necessity of upgrading system vulnerability check, a check item that does not reflect recent trends, a technical check case for latest intrusion technique, a related study on security threats and requirements. Based on this, we investigate the security vulnerability management system and vulnerability list of domestic and foreign countries, propose effective security vulnerability management system, and propose further study to improve overseas vulnerability diagnosis items so that they can be related to domestic vulnerability items.

• The Korean Journal of Air & Space Law and Policy
• /
• v.4
• /
• pp.7-35
• /
• 1992

The expansion of air transport on a global scale with ever increasing traffic densities has brought about problems that must be solved through new multilateral mechanisms. Looking to the immediate future, air transport will require new forms of international cooperation in technical and economic areas. Air transport by its very nature should have been a counterforce to nationalism. Yet, the regulatory system in civil aviation is still as firmly rooted in the principle of national sovereignty as when it was first proclaimed at t-11e Paris Convention of 1919 and reaffirmed in the Chicago Convention. Sovereignty over the airspace has remained the cornerstone of relations between states in all respects of air transport. The importance of sovereignty over air space embodied in article 1 of the Chicago Conrenton also is responsible for restricting the authority of ICAO as an intergovernmental regulatory agency. The Orgenization, for all its extensive efforts, has only limited authority. ICAO sets standards but cannot enforce them; it devises solutions but cannot impose them. To implement its rules ICAO most rely not so much on legal requirements as on the goodwill of states. It has been forty-eight years since international community set the foundations of the international system in civil aviation action. Profound political, economic and technological changes have taken place in air transport. The Chicago Convention is living proof that staes can work together to make air transport a safe mode of travel. The law governing international civil auiation is principally based on international treaties and on other regulation agreed to by governments, for the most part through the mechanism of ICAO. The role of ICAO international standards and recommended practices and procedures dealing with a broad range of technical matters could hardly be overestimated. The organization's ability to develop these standards and procedures, to adapt them continuously to the rapid sate of change and development of air transport, should be particularly stressed. The role of ICAO in the area of the development of multilateral conventions on international air law has been successful but to a certain degree. From the modest starting-point of the Tokyo Convention, we have seen more adequate international instruments prepared within the scope of ICAO activities, adopted: the Hague Convention of 1970 for the suppression of Unlawful Seizure of Aircraft and the Montreal Convention of 1971 for the Suppression of Unlawful Acts against the Safety of Civil Aviation. The work of ICAO in the new domain of international law conventions concerning what has been loosely termed above as the criminal problems connected with international air transport, in particular the problem of armed aggression against aircraft, should be positively appreciated. But ICAO records in the domain of developing a uniform legal system of international carriage by air are rather disappointing. The problem of maintaining and developing the uniformity of this regulation exceeds the scope of interest and competence of governmental transport agencies. The expectations of mankind linked to it are too great to give up trying to restore the uniform legal system of international air carriage that would create proper conditions for its further growth. It appears that ICAO has, at present, a good opportunity for doing this. The hasty preparation of ICAO draft conventions should be definitely excluded. Every Preliminary draft convention ought to be sent to Governments of all member-States for consideration, So that they could in form ICAO in due time of their observation. The problom of harmonizing a uniform law of international air carriage with that of other branches of international transport should demand more and more of its attention. ICAO cooperation with other international arganization, especially these working in the field of international transport, should be strengthened. ICAO is supposed to act as a link and a mediator among, at times the conflicting interests of member States, serving the happiness and peace of all of the world. The transformation of the contemporary world of developing international relations, stimulated by steadily growing international cooperation in its various dimensions, political, economic, scientific, technological, social and cultural, continuously confronts ICAO with new task.

• Agribusiness and Information Management
• /
• v.8 no.1
• /
• pp.17-26
• /
• 2016

India is largest producer of banana in the world producing 29.72 million tonnes from an area of 0.803 million ha with a productivity of 35.7 MT ha-1 and accounted for 15.48 and 27.01 per cent of the world's area and production respectively (www.nhb.gov.in). In India, Tamil Nadu leads other states both in terms of area and production followed by Maharashtra, Gujarat and Andhra Pradesh. In Rayalaseema region of Andhra Pradesh, Kurnool district had special reputation in the cultivation of banana in an area of 5765 hectares with an annual production of 2.01 lakh tonnes in the year 2012-13 and hence, it was purposively chosen for the study. On $23^{rd}$ November 2003, the Government of Andhra Pradesh has commenced a comprehensive project called 'Andhra Pradesh Micro Irrigation Project (APMIP)', first of its kind in the world so as to promote water use efficiency. APMIP is offering 100 per cent of subsidy in case of SC, ST and 90 per cent in case of other categories of farmers up to 5.0 acres of land. In case of acreage between 5-10 acres, 70 per cent subsidy and acreage above 10, 50 per cent of subsidy is given to the farmer beneficiaries. The sampling frame consists of Kurnool district, two mandals, four villages and 180 sample farmers comprising of 60 farmers each from Marginal (<1ha), Small (1-2ha) and Other (>2ha) categories. A well structured pre-tested schedule was employed to collect the requisite information pertaining to the performance of drip irrigation among the sample farmers and Data Envelopment Analysis (DEA) model was employed to analyze the performance of drip irrigation in banana farms. The performance of drip irrigation was assessed based on the parameters like: Land Development Works (LDW), Fertigation costs (FC), Volume of water supplied (VWS), Annual maintenance costs of drip irrigation (AMC), Economic Status of the farmer (ES), Crop Productivity (CP) etc. The first four parameters are considered as inputs and last two as outputs for DEA modelling purposes. The findings revealed that, the number of farms operating at CRS are more in number in other farms (46.66%) followed by marginal (45%) and small farms (28.33%). Similarly, regarding the number of farmers operating at VRS, the other farms are again more in number with 61.66 per cent followed by marginal (53.33%) and small farms (35%). With reference to scale efficiency, marginal farms dominate the scenario with 57 per cent followed by others (55%) and small farms (50%). At pooled level, 26.11 per cent of the farms are being operated at CRS with an average technical efficiency score of 0.6138 i.e., 47 out of 180 farms. Nearly 40 per cent of the farmers at pooled level are being operated at VRS with an average technical efficiency score of 0.7241. As regards to scale efficiency, nearly 52 per cent of the farmers (94 out of 180 farmers) at pooled level, either performed at the optimum scale or were close to the optimum scale (farms having scale efficiency values equal to or more than 0.90). Majority of the farms (39.44%) are operating at IRS and only 29 per cent of the farmers are operating at DRS. This signifies that, more resources should be provided to these farms operating at IRS and the same should be decreased towards the farms operating at DRS. Nearly 32 per cent of the farms are operating at CRS indicating efficient utilization of resources. Log linear regression model was used to analyze the major determinants of input use efficiency in banana farms. The input variables considered under DEA model were again considered as influential factors for the CRS obtained for the three categories of farmers. Volume of water supplied ($X_1$) and fertigation cost ($X_2$) are the major determinants of banana farms across all the farmer categories and even at pooled level. In view of their positive influence on the CRS, it is essential to strengthen modern irrigation infrastructure like drip irrigation and offer more fertilizer subsidies to the farmer to enhance the crop production on cost-effective basis in Kurnool district of Andhra Pradesh, India. This study further suggests that, the present era of Information Technology will help the irrigation management in the context of generating new techniques, extension, adoption and information. It will also guide the farmers in irrigation scheduling and quantifying the irrigation water requirements in accordance with the water availability in a particular season. So, it is high time for the Government of India to pay adequate attention towards the applications of 'Information and Communication Technology (ICT) and its applications in irrigation water management' for facilitating the deployment of Decision Supports Systems (DSSs) at various levels of planning and management of water resources in the country.

• Journal of Arbitration Studies
• /
• v.14 no.1
• /
• pp.273-314
• /
• 2004

There is a belief in the construction industry that the traditional court system may not be an ideal forum to effectively and efficiently resolve construction disputes due to the protracted proceedings and the three tier appeal system resulting in a long delay in the final and conclusive settlement of the dispute, relatively high costs involved, the lack of requisite knowledge and experience in the relevant industry, etc. Hence, they assert that certain alternative dispute resolution ('ADR') methods, such as mediation, conciliation, arbitration or a new system for dispute settlement in the form of any combination thereof should be developed and employed for construction disputes so as to resolve them more promptly and efficiently to the satisfaction of all the disputants concerned. This paper discusses certain merits of such assertions and the need for additional considerations for effective resolution of the construction disputes in light of the complexity of the case, importance of expert witnesses, parties' relationship and non-level playing field of the construction industry and so on. At the same time, however, given the inherent nature of disputes rendering the parties involved in an adversarial position, it would rather be difficult, if not practically impossible, to satisfy all the parties concerned in the dispute. Accordingly, in this study, it is also purported to address the demerits of such assertions by studying the situation from a more balanced perspective, in particular, in relation to the operation of such ADRs. In fact, most of such ADRs as stipulated by special acts, such as the Construction Industry Basic Act of Korea, in the form of mediation or conciliation, have failed to get support from the industry, and as a result, such ADRs are seldom used in practice. Tn contrast, the court system has been greatly improved by implementing a new concentrated review system and establishing several tribunals designed to specialize in the review and resolution of specific types of disputes, including the construction disputes. These improvements of the court system have been warmly received by the industry. Arbitration is another forum for settlement of construction disputes, which has grown and is expected to grow as the most effective ADR with the support from the construction industry. In this regard, the Korean Commercial Arbitration Board ('KCAB') has established a set of internal rules end procedures in operation to efficiently handle construction disputes. Considering the foregoing, this paper addresses the most important elements of the arbitration, i.e., arbitration agreement and arbitral award, primarily focusing on the domestic arbitrations before the KCAB. However, since this parer is prepared for presentation at the construction disputes seminar for the public audience, it is not intended for academic purposes, nor does it delve into any specific acadcmic issues. Likewise, although this paper addresses certain controversial issues by way of introduction, it mainly purports to facilitate the understanding of the general public, including the prospective arbitrators on the KCAB roster without the relevant legal education and background, concerning the importance of the integrity of the arbitration agreement and the arbitral award. In sum, what is purported in this study is simply to note that there are still many outstanding issues with mediation, conciliation and arbitration, as a matter of system, institutional operation or otherwise, for further study and consideration so as to enhance them as effective means for settlement of construction disputes, in replacement of or in conjunction with the court proceeding. For this purpose, it is essential for all the relevant parties, including lawyers, engineers, owners, contractors and social activists aiming to protect consumers' and subcontractors' interests, to conduct joint efforts to study the complicated nature of construction works and to develop effective means for examination and handling of the disputes of a technical nature, including the accumulation of the relevant industrial data. Based on the foregoing, the parties may be in a better position to select the appropriate dispute resolution mechanism, a court proceeding or in its stead, an effective ADR, considering the relevant factors of the subject construction works or the contract structure, such as the bargaining position of the parties, their financial status, confidentiality requirements, technical or commercial complexity of the case at hand, urgency for settlements, etc.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Journal of vocational education research
• /
• v.37 no.5
• /
• pp.25-53
• /
• 2018

The purpose of this study is to find out the improvement plan through the satisfaction survey of the trainees involved in vocational training fraud preventive education. In order to do this, we conducted a satisfaction survey(4,263 persons) of 5,939 people who participated in the prevention education conducted by group education or e-learning in 2017. Finally we collected 4,237 effective responses data. Descriptive statistics and the regression analysis were conducted. The finding of the study were as follows. First, the education service quality(4.42), satisfaction level(4.44), understanding level(4.44) and help level(4.45) were significantly higher than those of participants in the preventive education 4 and above. Second, e-learning participants' perceived level of education service quality, satisfaction, comprehension, and help was higher in all variables than collective education's. Third, all of the sub-factors of preventive education service quality influenced satisfaction, understanding, and help in collective education and e-learning, respectively. In the collective education, the contents of education had the greatest influence, and in e-learning, the data composition had the greatest influence. Fourth, desirable education contents were cases of fraud training(70.7%), disposition regulations(47.9%), NCS course operation instructions(32.8%) and training management best practices(32.4%). Additional requirements also included the establishment of an in-depth course, the provision of anti-fraud education content for trainees, and screen switching and system stability that can be focused on e-learning. Therefore, this study suggests that first, it is necessary to activate e-learning for prevention education more, reflecting satisfaction of e-learning is higher than that of collective education. Second, it is necessary to diversify the content of preventive education and to provide it more abundantly, because it has the biggest influence in common with the satisfaction, understanding and help level of the preventive education. Third, education content next, the factors that have a relatively big influence on satisfaction are shown as delivery method and education place in the collective education. Therefore, it is necessary to prepare education place considering the assignment of instructor and convenience. Fourth, constructing data next, the factor that have a relatively great influence on understanding and help are found to be operator support, and more active operator support activities are required in e-learning. Fifth, it is required to delivery prevention activity for trainees participating in vocational training. Sixth, it is necessary to analyze the educational need to construct the contents of preventive education more systematically.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.79-85
• /
• 2010

This study was investigated to review the potentials of irritation and skin sensitization of active ingredients and end-use products of pesticides for pesticide registration, prediction of irritation and sensitization, and data requirements for other purposes. Pesticide irritation and sensitization referred to the Pesticide Manual(14th edition), while toxicity was evaluated based on the data submitted by the pesticide registrant. Totally 148 active ingredients and 149 end-use products were analyzed to compare the positive response, formulation type, and correlation between active ingredients and products. Among active ingredients, ratio of positive response to skin irritation, eye irritation, and skin sensitization were 18.8, 47.0 and 20.6% respectively. While, positive response to skin irritation, eye irritation, and skin sensitization of the products were 14.9, 38.9 and 23.6%, respectively. Emulsifiable concentrate showed the highest positive response among formulation types showing skin irritation 31.3%, eye irritation 81.3%, and skin sensitization 31.3%. On the other hand granule type showed the lowest response with skin 4.8, eye 14.3 and sensitization 14.8%. There was no correlation by active ingredient content on irritation and sensitization of products. However, both active ingredients and products showed same positive response were skin 73.1%, skin sensitization 66.2%, and eye irritation 44.7%. By the these results, correlation between technical grade of active ingredients and end-use products would be use for pesticide management at the screening stage, especially skin irritation and skin sensitization.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.191-225
• /
• 2014

Most of all, this paper analyzes the current situation of EU(European Union) and ascertain EU's economic condition in terms of tariff lines and non-tariff barriers. and the purpose of this article is to find out the problems of EU's tariff lines and non-tariff barriers. Next, We suggest some future direction of export promotion from Korea to EU more largely for our companies. First, this paper describes the characteristics and outline of EU. The EU is a politico-economic union of 28 member states that are primarily located in Europe. The EU traces its origins from the European Coal and Steel Community(ECSC) and the European Economic Community(EEC), formed by the Inner Six countries in 1951 and 1958, respectively. After that, The Maastricht Treaty established the European Union under its current name in 1993. The latest major amendment to the constitutional basis of the EU, the Treaty of Lisbon, came into force in 2009. There are a combined population of over 500 million inhabitants and generated a nominal gross domestic product(GDP) of 16.692 trillion US dollars in EU. The results are as follows ; First of all, In terms of tariff lines and customs duties, Our companies have to know precisely EU's real tariff lines and other customs duties, and such as value added tax and exercise tax, corporate tax regulated by EU commission and EU's 28 members. second, our companies have to confirm EU's non-tariff barriers. such as RoHS, WEEE, REACH. These non-tariff barriers could be hindrances or obstacles to trade with foreign companies in other countries. We perceive all companies exporting to EU are related with these Technical Barriers to Trade irrespective of their nationality. So, Our companies fulfill the requirements of EU Commission concerning safety, health, environment etc. Also, Our companies choose market-driven strategy to export more largely than before in the field of marketing and logistics.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.1 s.11
• /
• pp.101-117
• /
• 2004

Standards are essential to facilitate the efficient use of GIS data. International Standards such as ISO TC211's 19100 series and various technical specifications from OpenGIS Consortium are some of the examples of efforts to maintain the interoperability among GIS applications. Marine GIS is no exception to this rule and in this context. developing standards for marine GIS is also in urgent needs. Using the same meaning and definition for the features commonly found in marine GIS applications is one of the ways to increase the interoperability among systems. One of the key requirements for maintaining the standard meanings for features is to build a common feature catalogue. This paper examines the concept of feature catalogue and describe the ways in which the feature catalogue can be organized. To identify the common features found in various marine GIS applications, a comprehensive search has been made to collect and analyze the features used in various applications. To maintain the interoperability with the National GIS (NGIS) system, the features used in various NGIS applications have been analyzed as well. The result of these analyses are used to create a comprehensive list of common features for marine GIS. This paper then explains the common feature catalogue for marine GIS and the provides the appropriate classification and coding systems for the common features. In addition, a registration tool for registering the common features into the standard registry has been developed in this study. This Web-based tool can be used to input features into the feature catalogue by various applications and also to maintain a standard-compliant feature catalogue by standard agencies.